\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
Flash Control Set Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
OPSTART : Programming or block erase start control bits
bits : 0 - 0 (1 bit)
access : write-only
PROGEN : Programmable enable control bit
bits : 1 - 1 (1 bit)
access : write-only
PAGEEN : Block erase enable control bit
bits : 2 - 2 (1 bit)
access : write-only
MASSEN : All erase enable control bit
bits : 3 - 3 (1 bit)
access : write-only
RDEN : Read enable control bit
bits : 4 - 4 (1 bit)
access : write-only
NVREN : Info enable control bit
bits : 5 - 5 (1 bit)
access : write-only
BOOTKEYEN : BOOT partition KEY matching enable bit
bits : 8 - 8 (1 bit)
access : write-only
USR1KEYEN : USR1 partition KEY matching enable bit
bits : 9 - 9 (1 bit)
access : write-only
USR2KEYEN : USR2 partition KEY matching enable bit
bits : 10 - 10 (1 bit)
access : write-only
Flash Address Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Flash Data Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Flash feed Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Interrupt Enable Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMPINTEN : Complete Operation Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
PROTINTEN : Protect Interrupt Enable
bits : 1 - 1 (1 bit)
access : read-write
ERRINTEN : Error Interrupt Enable
bits : 2 - 2 (1 bit)
access : read-write
RCHOFFINTEN : RCH State Detection Interrupt Enable
bits : 3 - 3 (1 bit)
access : read-write
DRDERRINTEN : Data Read Error Interrupt Enable
bits : 4 - 4 (1 bit)
access : read-write
Flash Interrupt Status Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
COMPLETE : Complete Operation Status
bits : 0 - 0 (1 bit)
access : read-only
PROTECT : Protect Interrupt Status
bits : 1 - 1 (1 bit)
access : read-only
ERROR : Error Interrupt Status
bits : 2 - 2 (1 bit)
access : read-only
RCHOFF : RCH State Detection Status
bits : 3 - 3 (1 bit)
access : read-only
DRDERR : Data Read Error Status
bits : 4 - 4 (1 bit)
access : read-only
Flash Interrupt Clear Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
COMPCLR : Complete Operation Clear
bits : 0 - 0 (1 bit)
access : write-only
PROTCLR : Protect Interrupt Clear
bits : 1 - 1 (1 bit)
access : write-only
ERRORCLR : Error Interrupt Clear
bits : 2 - 2 (1 bit)
access : write-only
RCHOFFCLR : RCH State Detection Clear
bits : 3 - 3 (1 bit)
access : write-only
DRDERRCLR : Data Read Error Clear
bits : 4 - 4 (1 bit)
access : write-only
Flash Status Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
BOOTPAREN : BOOT partition Status
bits : 0 - 0 (1 bit)
access : read-only
USR1PAREN : USR1 partition Status
bits : 1 - 1 (1 bit)
access : read-only
USR2PAREN : USR1 partition Status
bits : 2 - 2 (1 bit)
access : read-only
BOOTCRCEN : BOOT partition CRC enable
bits : 8 - 8 (1 bit)
access : read-only
USR1CRCEN : USR1 partition CRC enable
bits : 9 - 9 (1 bit)
access : read-only
USR2CRCEN : USR2 partition CRC enable
bits : 10 - 10 (1 bit)
access : read-only
BOOTKEYOK : BOOT key matching Status
bits : 16 - 16 (1 bit)
access : read-only
USR1KEYOK : USR1 key matching Status
bits : 17 - 17 (1 bit)
access : read-only
USR2KEYOK : USR2 key matching Status
bits : 18 - 18 (1 bit)
access : read-only
BOOTCRCOK : BOOT partition CRC check Status
bits : 24 - 24 (1 bit)
access : read-only
USR1CRCOK : USR1 partition CRC check Status
bits : 25 - 25 (1 bit)
access : read-only
USR2CRCOK : USR2 partition CRC check Status
bits : 26 - 26 (1 bit)
access : read-only
Flash Key1 Match Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Key2 Match Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Key3 Match Register
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
Flash Key4 Match Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
BOOT partition start address register
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
Flash Control Clear Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PROGEN : Programmable enable control bit
bits : 1 - 1 (1 bit)
access : write-only
PAGEEN : Block erase enable control bit
bits : 2 - 2 (1 bit)
access : write-only
MASSEN : All erase enable control bit
bits : 3 - 3 (1 bit)
access : write-only
RDEN : Read enable control bit
bits : 4 - 4 (1 bit)
access : write-only
NVREN : Info enable control bit
bits : 5 - 5 (1 bit)
access : write-only
BOOTKEYEN : BOOT partition KEY matching enable bit
bits : 8 - 8 (1 bit)
access : write-only
USR1KEYEN : USR1 partition KEY matching enable bit
bits : 9 - 9 (1 bit)
access : write-only
USR2KEYEN : USR2 partition KEY matching enable bit
bits : 10 - 10 (1 bit)
access : write-only
BOOT partition end address register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
User1 partition start address register
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
User1 partition end address register
address_offset : 0x48 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
User2 partition start address register
address_offset : 0x4C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
User2 partition end address register
address_offset : 0x50 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
Flash Control Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PROGEN : Programmable enable control bit
bits : 1 - 1 (1 bit)
access : read-only
PAGEEN : Block erase enable control bit
bits : 2 - 2 (1 bit)
access : read-only
MASSEN : All erase enable control bit
bits : 3 - 3 (1 bit)
access : read-only
RDEN : Read enable control bit
bits : 4 - 4 (1 bit)
access : read-only
NVREN : Info enable control bit
bits : 5 - 5 (1 bit)
access : read-only
BOOTKEYEN : BOOT partition KEY matching enable bit
bits : 8 - 8 (1 bit)
access : read-only
USR1KEYEN : USR1 partition KEY matching enable bit
bits : 9 - 9 (1 bit)
access : read-only
USR2KEYEN : USR2 partition KEY matching enable bit
bits : 10 - 10 (1 bit)
access : read-only
Flash Configure Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
READCFG : READCFG
bits : 0 - 1 (2 bit)
access : read-write
PREFETCHEN : PREFETCHEN
bits : 2 - 2 (1 bit)
access : read-write
NODATAPRF : NODATAPRF
bits : 4 - 4 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.