\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
No Description
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DECBODEN : DECBOD enable
bits : 0 - 0 (1 bit)
access : read-write
DECBODMASK : DECBOD Mask
bits : 1 - 1 (1 bit)
access : read-write
DECOVMBODEN : Over Voltage Monitor enable
bits : 4 - 4 (1 bit)
access : read-write
DECOVMBODMASK : Over Voltage Monitor Mask
bits : 5 - 5 (1 bit)
access : read-write
No Description
address_offset : 0x100 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EFPIF : EFP Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write
No Description
address_offset : 0x104 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EFPIEN : EFP Interrupt enable
bits : 0 - 0 (1 bit)
access : read-write
No Description
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AVDDBODEN : AVDD BOD enable
bits : 0 - 0 (1 bit)
access : read-write
VDDIO0BODEN : VDDIO0 BOD enable
bits : 1 - 1 (1 bit)
access : read-write
VDDIO1BODEN : VDDIO1 BOD enable
bits : 2 - 2 (1 bit)
access : read-write
No Description
address_offset : 0x3C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VREGINCMPEN : VREGVDD comparator enable
bits : 0 - 0 (1 bit)
access : read-write
THRESSEL : VREGVDD comparator threshold programming
bits : 1 - 2 (2 bit)
access : read-write
No Description
address_offset : 0x40 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PD1PARETDIS : Disable PD1 Partial Retention
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : RETAIN
Retain associated registers when in EM2/3
1 : NORETAIN
Do not retain associcated registers when in EM2/3
End of enumeration elements list.
No Description
address_offset : 0x60 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
LOCKKEY : Lock Key
bits : 0 - 15 (16 bit)
access : write-only
Enumeration:
44520 : UNLOCK
Unlock EMU register
End of enumeration elements list.
No Description
address_offset : 0x64 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AVDDBOD : AVDD BOD Interrupt flag
bits : 16 - 16 (1 bit)
access : read-write
IOVDD0BOD : VDDIO0 BOD Interrupt flag
bits : 17 - 17 (1 bit)
access : read-write
EM23WAKEUP : EM23 Wake up Interrupt flag
bits : 24 - 24 (1 bit)
access : read-write
VSCALEDONE : Vscale done Interrupt flag
bits : 25 - 25 (1 bit)
access : read-write
TEMPAVG : Temperature Average Interrupt flag
bits : 27 - 27 (1 bit)
access : read-write
TEMP : Temperature Interrupt flag
bits : 29 - 29 (1 bit)
access : read-write
TEMPLOW : Temperature low Interrupt flag
bits : 30 - 30 (1 bit)
access : read-write
TEMPHIGH : Temperature high Interrupt flag
bits : 31 - 31 (1 bit)
access : read-write
No Description
address_offset : 0x68 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AVDDBOD : AVDD BOD Interrupt enable
bits : 16 - 16 (1 bit)
access : read-write
IOVDD0BOD : VDDIO0 BOD Interrupt enable
bits : 17 - 17 (1 bit)
access : read-write
EM23WAKEUP : EM23 Wake up Interrupt enable
bits : 24 - 24 (1 bit)
access : read-write
VSCALEDONE : Vscale done Interrupt enable
bits : 25 - 25 (1 bit)
access : read-write
TEMPAVG : Temperature Interrupt enable
bits : 27 - 27 (1 bit)
access : read-write
TEMP : Temperature Interrupt enable
bits : 29 - 29 (1 bit)
access : read-write
TEMPLOW : Temperature low Interrupt enable
bits : 30 - 30 (1 bit)
access : read-write
TEMPHIGH : Temperature high Interrupt enable
bits : 31 - 31 (1 bit)
access : read-write
No Description
address_offset : 0x6C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM4ENTRY : EM4 entry request
bits : 0 - 1 (2 bit)
access : read-write
EM4IORETMODE : EM4 IO retention mode
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : DISABLE
No Retention: Pads enter reset state when entering EM4
1 : EM4EXIT
Retention through EM4: Pads enter reset state when exiting EM4
2 : SWUNLATCH
Retention through EM4 and Wakeup: software writes UNLATCH register to remove retention
End of enumeration elements list.
BOD3SENSEEM4WU : Set BOD3SENSE as EM4 wakeup
bits : 8 - 8 (1 bit)
access : read-write
No Description
address_offset : 0x70 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
EM4UNLATCH : EM4 unlatch
bits : 1 - 1 (1 bit)
access : write-only
TEMPAVGREQ : Temperature Average Request
bits : 4 - 4 (1 bit)
access : write-only
EM01VSCALE1 : Scale voltage to Vscale1
bits : 10 - 10 (1 bit)
access : write-only
EM01VSCALE2 : Scale voltage to Vscale2
bits : 11 - 11 (1 bit)
access : write-only
RSTCAUSECLR : Reset Cause Clear
bits : 17 - 17 (1 bit)
access : write-only
No Description
address_offset : 0x74 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM2DBGEN : Enable debugging in EM2
bits : 0 - 0 (1 bit)
access : read-write
TEMPAVGNUM : Averaged Temperature samples num
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
0 : N16
16 measurements
1 : N64
64 measurements
End of enumeration elements list.
EM23VSCALE : EM2/EM3 Vscale
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : VSCALE0
VSCALE0. 0.9v
1 : VSCALE1
VSCALE1. 1.0v
2 : VSCALE2
VSCALE2. 1.1v
End of enumeration elements list.
FLASHPWRUPONDEMAND : Enable flash on demand wakeup
bits : 16 - 16 (1 bit)
access : read-write
EFPDIRECTMODEEN : EFP Direct Mode Enable
bits : 29 - 29 (1 bit)
access : read-write
EFPDRVDECOUPLE : EFP drives DECOUPLE
bits : 30 - 30 (1 bit)
access : read-write
EFPDRVDVDD : EFP drives DVDD
bits : 31 - 31 (1 bit)
access : read-write
No Description
address_offset : 0x78 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TEMPLOW : Temp Low limit
bits : 0 - 8 (9 bit)
access : read-write
TEMPHIGH : Temp High limit
bits : 16 - 24 (9 bit)
access : read-write
No Description
address_offset : 0x84 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
LOCK : Lock status
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
0 : UNLOCKED
All EMU lockable registers are unlocked.
1 : LOCKED
All EMU lockable registers are locked.
End of enumeration elements list.
FIRSTTEMPDONE : First Temp done
bits : 1 - 1 (1 bit)
access : read-only
TEMPACTIVE : Temp active
bits : 2 - 2 (1 bit)
access : read-only
TEMPAVGACTIVE : Temp Average active
bits : 3 - 3 (1 bit)
access : read-only
VSCALEBUSY : Vscale busy
bits : 4 - 4 (1 bit)
access : read-only
VSCALEFAILED : Vscale failed
bits : 5 - 5 (1 bit)
access : read-only
VSCALE : Vscale status
bits : 6 - 7 (2 bit)
access : read-only
Enumeration:
0 : VSCALE0
Voltage scaling set to 0.9v
1 : VSCALE1
Voltage scaling set to 1.0v
2 : VSCALE2
Voltage scaling set to 1.1v
End of enumeration elements list.
EM4IORET : EM4 IO retention status
bits : 12 - 12 (1 bit)
access : read-only
EM2ENTERED : EM2 entered
bits : 14 - 14 (1 bit)
access : read-only
No Description
address_offset : 0x88 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TEMPLSB : Temperature measured decimal part
bits : 0 - 1 (2 bit)
access : read-only
TEMP : Temperature measured
bits : 2 - 10 (9 bit)
access : read-only
TEMPAVG : Averaged Temperature
bits : 16 - 26 (11 bit)
access : read-only
No Description
address_offset : 0x90 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WDOG0RMODE : Enable WDOG0 reset
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : DISABLED
Reset request is blocked
1 : ENABLED
The entire device is reset except some EMU registers
End of enumeration elements list.
SYSRMODE : Enable M33 System reset
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
0 : DISABLED
Reset request is blocked
1 : ENABLED
Device is reset except some EMU registers
End of enumeration elements list.
LOCKUPRMODE : Enable M33 Lockup reset
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
0 : DISABLED
Reset Request is Block
1 : ENABLED
The entire device is reset except some EMU registers
End of enumeration elements list.
AVDDBODRMODE : Enable AVDD BOD reset
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
0 : DISABLED
Reset Request is block
1 : ENABLED
The entire device is reset except some EMU registers
End of enumeration elements list.
IOVDD0BODRMODE : Enable VDDIO0 BOD reset
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
0 : DISABLED
Reset request is blocked
1 : ENABLED
The entire device is reset except some EMU registers
End of enumeration elements list.
DECBODRMODE : Enable DECBOD reset
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
0 : DISABLED
Reset request is blocked
1 : ENABLED
The entire device is reset
End of enumeration elements list.
DCIRMODE : DCI System reset
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
0 : DISABLED
Reset request blocked
1 : ENABLED
The entire device is reset except some EMU registers
End of enumeration elements list.
No Description
address_offset : 0x94 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
POR : Power On Reset
bits : 0 - 0 (1 bit)
access : read-only
PIN : Pin Reset
bits : 1 - 1 (1 bit)
access : read-only
EM4 : EM4 Wakeup Reset
bits : 2 - 2 (1 bit)
access : read-only
WDOG0 : Watchdog 0 Reset
bits : 3 - 3 (1 bit)
access : read-only
LOCKUP : M33 Core Lockup Reset
bits : 5 - 5 (1 bit)
access : read-only
SYSREQ : M33 Core Sys Reset
bits : 6 - 6 (1 bit)
access : read-only
DVDDBOD : HVBOD Reset
bits : 7 - 7 (1 bit)
access : read-only
DVDDLEBOD : LEBOD Reset
bits : 8 - 8 (1 bit)
access : read-only
DECBOD : LVBOD Reset
bits : 9 - 9 (1 bit)
access : read-only
AVDDBOD : LEBOD1 Reset
bits : 10 - 10 (1 bit)
access : read-only
IOVDD0BOD : LEBOD2 Reset
bits : 11 - 11 (1 bit)
access : read-only
DCI : DCI reset
bits : 16 - 16 (1 bit)
access : read-only
VREGIN : DCDC VREGIN comparator
bits : 31 - 31 (1 bit)
access : read-only
No Description
address_offset : 0xA0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM23WAKEUPDGIF : EM23 Wake up Interrupt flag
bits : 24 - 24 (1 bit)
access : read-write
TEMPDGIF : Temperature Interrupt flag
bits : 29 - 29 (1 bit)
access : read-write
TEMPLOWDGIF : Temperature low Interrupt flag
bits : 30 - 30 (1 bit)
access : read-write
TEMPHIGHDGIF : Temperature high Interrupt flag
bits : 31 - 31 (1 bit)
access : read-write
No Description
address_offset : 0xA4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM23WAKEUPDGIEN : EM23 Wake up Interrupt enable
bits : 24 - 24 (1 bit)
access : read-write
TEMPDGIEN : Temperature Interrupt enable
bits : 29 - 29 (1 bit)
access : read-write
TEMPLOWDGIEN : Temperature low Interrupt enable
bits : 30 - 30 (1 bit)
access : read-write
TEMPHIGHDGIEN : Temperature high Interrupt enable
bits : 31 - 31 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.