\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
Register used for enabling/disabling interrupts.
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PPUNSPRIVIEN : PPUNS Privilege Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
PPUNSINSTIEN : PPUNS Instruction Interrupt Enable
bits : 2 - 2 (1 bit)
access : read-write
Read this register to query the fault status.
address_offset : 0x140 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PPUFSPERIPHID : Peripheral ID
bits : 0 - 7 (8 bit)
access : read-only
Write to set BMPU priveledged attributes.
address_offset : 0x150 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRYPTOACC : CRYPTOACC DMA privileged mode
bits : 1 - 1 (1 bit)
access : read-write
LDMA : MCU LDMA privileged mode
bits : 4 - 4 (1 bit)
access : read-write
Register for status flags.
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SMUNSLOCK : SMUNS Lock Status
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
0 : UNLOCKED
SMUNSLOCK Unlocked
1 : LOCKED
SMUNSLOCK Locked
End of enumeration elements list.
Set peripheral bits to 1 to mark as privileged access only.
address_offset : 0x40 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EMU : EMU Privileged Access
bits : 1 - 1 (1 bit)
access : read-write
CMU : CMU Privileged Access
bits : 2 - 2 (1 bit)
access : read-write
HFXO0 : HFXO0 Privileged Access
bits : 3 - 3 (1 bit)
access : read-write
HFRCO0 : HFRCO0 Privileged Access
bits : 4 - 4 (1 bit)
access : read-write
FSRCO : FSRCO Privileged Access
bits : 5 - 5 (1 bit)
access : read-write
DPLL0 : DPLL0 Privileged Access
bits : 6 - 6 (1 bit)
access : read-write
LFXO : LFXO Privileged Access
bits : 7 - 7 (1 bit)
access : read-write
LFRCO : LFRCO Privileged Access
bits : 8 - 8 (1 bit)
access : read-write
ULFRCO : ULFRCO Privileged Access
bits : 9 - 9 (1 bit)
access : read-write
MSC : MSC Privileged Access
bits : 10 - 10 (1 bit)
access : read-write
ICACHE0 : ICACHE0 Privileged Access
bits : 11 - 11 (1 bit)
access : read-write
PRS : PRS Privileged Access
bits : 12 - 12 (1 bit)
access : read-write
GPIO : GPIO Privileged Access
bits : 13 - 13 (1 bit)
access : read-write
LDMA : LDMA Privileged Access
bits : 14 - 14 (1 bit)
access : read-write
LDMAXBAR : LDMAXBAR Privileged Access
bits : 15 - 15 (1 bit)
access : read-write
TIMER0 : TIMER0 Privileged Access
bits : 16 - 16 (1 bit)
access : read-write
TIMER1 : TIMER1 Privileged Access
bits : 17 - 17 (1 bit)
access : read-write
TIMER2 : TIMER2 Privileged Access
bits : 18 - 18 (1 bit)
access : read-write
TIMER3 : TIMER3 Privileged Access
bits : 19 - 19 (1 bit)
access : read-write
TIMER4 : TIMER4 Privileged Access
bits : 20 - 20 (1 bit)
access : read-write
USART0 : USART0 Privileged Access
bits : 21 - 21 (1 bit)
access : read-write
USART1 : USART1 Privileged Access
bits : 22 - 22 (1 bit)
access : read-write
BURTC : BURTC Privileged Access
bits : 23 - 23 (1 bit)
access : read-write
I2C1 : I2C1 Privileged Access
bits : 24 - 24 (1 bit)
access : read-write
CHIPTESTCTRL : CHIPTESTCTRL Privileged Access
bits : 25 - 25 (1 bit)
access : read-write
SYSCFGCFGNS : SYSCFGCFGNS Privileged Access
bits : 26 - 26 (1 bit)
access : read-write
SYSCFG : SYSCFG Privileged Access
bits : 27 - 27 (1 bit)
access : read-write
BURAM : BURAM Privileged Access
bits : 28 - 28 (1 bit)
access : read-write
GPCRC : GPCRC Privileged Access
bits : 30 - 30 (1 bit)
access : read-write
DCI : DCI Privileged Access
bits : 31 - 31 (1 bit)
access : read-write
Set peripheral bits to 1 to mark as privileged access only.
address_offset : 0x44 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DCDC : DCDC Privileged Access
bits : 1 - 1 (1 bit)
access : read-write
PDM : PDM Privileged Access
bits : 2 - 2 (1 bit)
access : read-write
SMU : SMU Privileged Access
bits : 5 - 5 (1 bit)
access : read-write
SMUCFGNS : SMUCFGNS Privileged Access
bits : 6 - 6 (1 bit)
access : read-write
RTCC : RTCC Privileged Access
bits : 7 - 7 (1 bit)
access : read-write
LETIMER0 : LETIMER0 Privileged Access
bits : 8 - 8 (1 bit)
access : read-write
IADC0 : IADC0 Privileged Access
bits : 9 - 9 (1 bit)
access : read-write
I2C0 : I2C0 Privileged Access
bits : 10 - 10 (1 bit)
access : read-write
WDOG0 : WDOG0 Privileged Access
bits : 11 - 11 (1 bit)
access : read-write
AMUXCP0 : AMUXCP0 Privileged Access
bits : 12 - 12 (1 bit)
access : read-write
EUART0 : EUART0 Privileged Access
bits : 13 - 13 (1 bit)
access : read-write
CRYPTOACC : CRYPTOACC Privileged Access
bits : 14 - 14 (1 bit)
access : read-write
Register used to lock/unlock access to the register file.
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
SMUNSLOCKKEY : SMU Non-Secure Lock/Key
bits : 0 - 23 (24 bit)
access : write-only
Enumeration:
11325013 : UNLOCK
Unlocks Registers
End of enumeration elements list.
Register for interrupt status flags.
address_offset : 0xC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PPUNSPRIVIF : PPUNS Privilege Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write
PPUNSINSTIF : PPUNS Instruction Interrupt Flag
bits : 2 - 2 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.