\n
address_offset : 0x0 Bytes (0x0)
size : 0x321 byte (0x0)
mem_usage : registers
protection :
Interrupt set-enable register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BLE_WAKEUP_LP_IRQn : BLE_WAKEUP_LP_IRQn (Interrupt set-enable bit)
bits : 0 - 0 (1 bit)
access : read-write
BLE_GEN_IRQn : BLE_GEN_IRQn (Interrupt set-enable bit)
bits : 1 - 2 (2 bit)
access : read-write
UART_IRQn : UART_IRQn (Interrupt set-enable bit)
bits : 2 - 4 (3 bit)
access : read-write
UART2_IRQn : UART2_IRQn (Interrupt set-enable bit)
bits : 3 - 6 (4 bit)
access : read-write
I2C_IRQn : I2C_IRQn (Interrupt set-enable bit)
bits : 4 - 8 (5 bit)
access : read-write
SPI_IRQn : SPI_IRQn (Interrupt set-enable bit)
bits : 5 - 10 (6 bit)
access : read-write
ADC_IRQn : ADC_IRQn (Interrupt set-enable bit)
bits : 6 - 12 (7 bit)
access : read-write
KEYBRD_IRQn : KEYBRD_IRQn (Interrupt set-enable bit)
bits : 7 - 14 (8 bit)
access : read-write
BLE_RF_DIAG_IRQn : BLE baseband or Radio diagnostic (Interrupt set-enable bit))
bits : 8 - 16 (9 bit)
access : read-write
RFCAL_IRQn : RFCAL_IRQn (Interrupt set-enable bit)
bits : 9 - 18 (10 bit)
access : read-write
GPIO0_IRQn : GPIO0 interrupt through debounce (Interrupt set-enable bit)
bits : 10 - 20 (11 bit)
access : read-write
GPIO1_IRQn : GPIO1 interrupt through debounce (Interrupt set-enable bit)
bits : 11 - 22 (12 bit)
access : read-write
GPIO2_IRQn : GPIO2 interrupt through debounce (Interrupt set-enable bit)
bits : 12 - 24 (13 bit)
access : read-write
GPIO3_IRQn : IGPIO3 interrupt through debounce (Interrupt set-enable bit)
bits : 13 - 26 (14 bit)
access : read-write
GPIO4_IRQn : GPIO4 interrupt through debounce (Interrupt set-enable bit)
bits : 14 - 28 (15 bit)
access : read-write
SWTIM_IRQn : Software timer Interrupt (set-enable bit)
bits : 15 - 30 (16 bit)
access : read-write
WKUP_QUADEC_IRQn : Combined Wake up Capture Timer, GPIO and QuadDecoder interrupt (set-enable bit)
bits : 16 - 32 (17 bit)
access : read-write
PCM_IRQn : PCM Interrupt (set-enable bit)
bits : 17 - 34 (18 bit)
access : read-write
SRC_IN_IRQn : Sample rate converter input Interrupt (set-enable bit)
bits : 18 - 36 (19 bit)
access : read-write
SRC_OUT_IRQn : Sample rate converter output Interrupt (set-enable bit)
bits : 19 - 38 (20 bit)
access : read-write
DMA_IRQn : DMA Interrupt (set-enable bit)
bits : 20 - 40 (21 bit)
access : read-write
Interrupt set-pending register
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BLE_WAKEUP_LP_IRQn : BLE_WAKEUP_LP_IRQn (Interrupt set-pending bit)
bits : 0 - 0 (1 bit)
access : read-write
BLE_GEN_IRQn : BLE_GEN_IRQn (Interrupt set-pending bit)
bits : 1 - 2 (2 bit)
access : read-write
UART_IRQn : UART_IRQn (Interrupt set-pending bit)
bits : 2 - 4 (3 bit)
access : read-write
UART2_IRQn : UART2_IRQn (Interrupt set-pending bit)
bits : 3 - 6 (4 bit)
access : read-write
I2C_IRQn : I2C_IRQn (Interrupt set-pending bit)
bits : 4 - 8 (5 bit)
access : read-write
SPI_IRQn : SPI_IRQn (Interrupt set-pending bit)
bits : 5 - 10 (6 bit)
access : read-write
ADC_IRQn : ADC_IRQn (Interrupt set-pending bit)
bits : 6 - 12 (7 bit)
access : read-write
KEYBRD_IRQn : KEYBRD_IRQn (Interrupt set-pending bit)
bits : 7 - 14 (8 bit)
access : read-write
BLE_RF_DIAG_IRQn : BLE baseband or Radio diagnostic (Interrupt set-pending bit))
bits : 8 - 16 (9 bit)
access : read-write
RFCAL_IRQn : RFCAL_IRQn (Interrupt set-pending bit)
bits : 9 - 18 (10 bit)
access : read-write
GPIO0_IRQn : GPIO0 interrupt through debounce (Interrupt set-pending bit)
bits : 10 - 20 (11 bit)
access : read-write
GPIO1_IRQn : GPIO1 interrupt through debounce (Interrupt set-pending bit)
bits : 11 - 22 (12 bit)
access : read-write
GPIO2_IRQn : GPIO2 interrupt through debounce (Interrupt set-pending bit)
bits : 12 - 24 (13 bit)
access : read-write
GPIO3_IRQn : IGPIO3 interrupt through debounce (Interrupt set-pending bit)
bits : 13 - 26 (14 bit)
access : read-write
GPIO4_IRQn : GPIO4 interrupt through debounce (Interrupt set-pending bit)
bits : 14 - 28 (15 bit)
access : read-write
SWTIM_IRQn : Software timer Interrupt (set-pending bit)
bits : 15 - 30 (16 bit)
access : read-write
WKUP_QUADEC_IRQn : Combined Wake up Capture Timer, GPIO and QuadDecoder interrupt (set-pending bit)
bits : 16 - 32 (17 bit)
access : read-write
PCM_IRQn : PCM Interrupt (set-pending bit)
bits : 17 - 34 (18 bit)
access : read-write
SRC_IN_IRQn : Sample rate converter input Interrupt (set-pending bit)
bits : 18 - 36 (19 bit)
access : read-write
SRC_OUT_IRQn : Sample rate converter output Interrupt (set-pending bit)
bits : 19 - 38 (20 bit)
access : read-write
DMA_IRQn : DMA Interrupt (set-pending bit)
bits : 20 - 40 (21 bit)
access : read-write
Interrupt clear-pending register
address_offset : 0x180 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BLE_WAKEUP_LP_IRQn : BLE_WAKEUP_LP_IRQn (Interrupt clear-pending bit)
bits : 0 - 0 (1 bit)
access : read-write
BLE_GEN_IRQn : BLE_GEN_IRQn (Interrupt clear-pending bit)
bits : 1 - 2 (2 bit)
access : read-write
UART_IRQn : UART_IRQn (Interrupt clear-pending bit)
bits : 2 - 4 (3 bit)
access : read-write
UART2_IRQn : UART2_IRQn (Interrupt clear-pending bit)
bits : 3 - 6 (4 bit)
access : read-write
I2C_IRQn : I2C_IRQn (Interrupt clear-pending bit)
bits : 4 - 8 (5 bit)
access : read-write
SPI_IRQn : SPI_IRQn (Interrupt clear-pending bit)
bits : 5 - 10 (6 bit)
access : read-write
ADC_IRQn : ADC_IRQn (Interrupt clear-pending bit)
bits : 6 - 12 (7 bit)
access : read-write
KEYBRD_IRQn : KEYBRD_IRQn (Interrupt clear-pending bit)
bits : 7 - 14 (8 bit)
access : read-write
BLE_RF_DIAG_IRQn : BLE baseband or Radio diagnostic (Interrupt clear-pending bit))
bits : 8 - 16 (9 bit)
access : read-write
RFCAL_IRQn : RFCAL_IRQn (Interrupt clear-pending bit)
bits : 9 - 18 (10 bit)
access : read-write
GPIO0_IRQn : GPIO0 interrupt through debounce (Interrupt clear-pending bit)
bits : 10 - 20 (11 bit)
access : read-write
GPIO1_IRQn : GPIO1 interrupt through debounce (Interrupt clear-pending bit)
bits : 11 - 22 (12 bit)
access : read-write
GPIO2_IRQn : GPIO2 interrupt through debounce (Interrupt clear-pending bit)
bits : 12 - 24 (13 bit)
access : read-write
GPIO3_IRQn : IGPIO3 interrupt through debounce (Interrupt clear-pending bit)
bits : 13 - 26 (14 bit)
access : read-write
GPIO4_IRQn : GPIO4 interrupt through debounce (Interrupt clear-pending bit)
bits : 14 - 28 (15 bit)
access : read-write
SWTIM_IRQn : Software timer Interrupt (clear-pending bit)
bits : 15 - 30 (16 bit)
access : read-write
WKUP_QUADEC_IRQn : Combined Wake up Capture Timer, GPIO and QuadDecoder interrupt (clear-pending bit)
bits : 16 - 32 (17 bit)
access : read-write
PCM_IRQn : PCM Interrupt (clear-pending bit)
bits : 17 - 34 (18 bit)
access : read-write
SRC_IN_IRQn : Sample rate converter input Interrupt (clear-pending bit)
bits : 18 - 36 (19 bit)
access : read-write
SRC_OUT_IRQn : Sample rate converter output Interrupt (clear-pending bit)
bits : 19 - 38 (20 bit)
access : read-write
DMA_IRQn : DMA Interrupt (clear-pending bit)
bits : 20 - 40 (21 bit)
access : read-write
Interrupt priority register 0
address_offset : 0x300 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BLE_WAKEUP_LP_IRQn_prio : BLE_WAKEUP_LP_IRQn[7:0] bits (Interrupt priority)
bits : 0 - 7 (8 bit)
access : read-write
BLE_GEN_IRQn_prio : BLE_GEN_IRQn[7:0] bits (Interrupt priority)
bits : 8 - 23 (16 bit)
access : read-write
UART_IRQn_prio : UART_IRQn[7:0] bits (Interrupt priority)
bits : 16 - 39 (24 bit)
access : read-write
UART2_IRQn_prio : UART2_IRQn[7:0] bits (Interrupt priority)
bits : 24 - 55 (32 bit)
access : read-write
Interrupt priority register 1
address_offset : 0x304 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
I2C_IRQn_prio : I2C_IRQn[7:0] bits (Interrupt priority)
bits : 0 - 7 (8 bit)
access : read-write
SPI_IRQn_prio : SPI_IRQn[7:0] bits (Interrupt priority)
bits : 8 - 23 (16 bit)
access : read-write
ADC_IRQn_prio : ADC_IRQn[7:0] bits (Interrupt priority)
bits : 16 - 39 (24 bit)
access : read-write
KEYBRD_IRQn_prio : KEYBRD_IRQn[7:0] bits (Interrupt priority)
bits : 24 - 55 (32 bit)
access : read-write
Interrupt priority register 2
address_offset : 0x308 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BLE_RF_DIAG_IRQn_prio : BLE_RF_DIAG_IRQn[7:0] bits (Interrupt priority)
bits : 0 - 7 (8 bit)
access : read-write
RF_CAL_IRQn_prio : RF_CAL_IRQn[7:0] bits (Interrupt priority)
bits : 8 - 23 (16 bit)
access : read-write
GPIO0_IRQn_prio : GPIO0_IRQn[7:0] bits (Interrupt priority)
bits : 16 - 39 (24 bit)
access : read-write
GPIO1_IRQn_prio : GPIO1_IRQn[7:0] bits (Interrupt priority)
bits : 24 - 55 (32 bit)
access : read-write
Interrupt priority register 3
address_offset : 0x30C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SPI_IRQn_prio : SPI_IRQn[7:0] bits (Interrupt priority)
bits : 0 - 7 (8 bit)
access : read-write
SPI2_IRQn_prio : SPI2_IRQn[7:0] bits (Interrupt priority)
bits : 8 - 23 (16 bit)
access : read-write
ADC_IRQn_prio : ADC_IRQn[7:0] bits (Interrupt priority)
bits : 16 - 39 (24 bit)
access : read-write
KEYBRD_IRQn_prio : KEYBRD_IRQn[7:0] bits (Interrupt priority)
bits : 24 - 55 (32 bit)
access : read-write
Interrupt priority register 4
address_offset : 0x310 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GPIO2_IRQn_prio : GPIO2_IRQn[7:0] bits (Interrupt priority)
bits : 0 - 7 (8 bit)
access : read-write
GPIO3_IRQn_prio : GPIO3_IRQn[7:0] bits (Interrupt priority)
bits : 8 - 23 (16 bit)
access : read-write
GPIO4_IRQn_prio : GPIO4_IRQn[7:0] bits (Interrupt priority)
bits : 16 - 39 (24 bit)
access : read-write
SWTIM_IRQn_prio : SWTIM_IRQn[7:0] bits (Interrupt priority)
bits : 24 - 55 (32 bit)
access : read-write
Interrupt priority register 5
address_offset : 0x314 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WKUP_QUADEC_IRQn_prio : WKUP_QUADEC_IRQn[7:0] bits (Interrupt priority)
bits : 0 - 7 (8 bit)
access : read-write
PCM_IRQn_prio : PCM_IRQn[7:0] bits (Interrupt priority)
bits : 8 - 23 (16 bit)
access : read-write
SRC_IN_IRQn_prio : SRC_IN_IRQn[7:0] bits (Interrupt priority)
bits : 16 - 39 (24 bit)
access : read-write
SRC_OUT_IRQn_prio : SRC_OUT_IRQn[7:0] bits (Interrupt priority)
bits : 24 - 55 (32 bit)
access : read-write
Interrupt priority register 6
address_offset : 0x318 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DMA_IRQn_prio : DMA_IRQn[7:0] bits (Interrupt priority)
bits : 0 - 7 (8 bit)
access : read-write
Interrupt clear-enable register
address_offset : 0x80 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BLE_WAKEUP_LP_IRQn : BLE_WAKEUP_LP_IRQn (Interrupt clear-enable bit)
bits : 0 - 0 (1 bit)
access : read-write
BLE_GEN_IRQn : BLE_GEN_IRQn (Interrupt clear-enable bit)
bits : 1 - 2 (2 bit)
access : read-write
UART_IRQn : UART_IRQn (Interrupt clear-enable bit)
bits : 2 - 4 (3 bit)
access : read-write
UART2_IRQn : UART2_IRQn (Interrupt clear-enable bit)
bits : 3 - 6 (4 bit)
access : read-write
I2C_IRQn : I2C_IRQn (Interrupt clear-enable bit)
bits : 4 - 8 (5 bit)
access : read-write
SPI_IRQn : SPI_IRQn (Interrupt clear-enable bit)
bits : 5 - 10 (6 bit)
access : read-write
ADC_IRQn : ADC_IRQn (Interrupt clear-enable bit)
bits : 6 - 12 (7 bit)
access : read-write
KEYBRD_IRQn : KEYBRD_IRQn (Interrupt clear-enable bit)
bits : 7 - 14 (8 bit)
access : read-write
BLE_RF_DIAG_IRQn : BLE baseband or Radio diagnostic (Interrupt clear-enable bit))
bits : 8 - 16 (9 bit)
access : read-write
RFCAL_IRQn : RFCAL_IRQn (Interrupt clear-enable bit)
bits : 9 - 18 (10 bit)
access : read-write
GPIO0_IRQn : GPIO0 interrupt through debounce (Interrupt clear-enable bit)
bits : 10 - 20 (11 bit)
access : read-write
GPIO1_IRQn : GPIO1 interrupt through debounce (Interrupt clear-enable bit)
bits : 11 - 22 (12 bit)
access : read-write
GPIO2_IRQn : GPIO2 interrupt through debounce (Interrupt clear-enable bit)
bits : 12 - 24 (13 bit)
access : read-write
GPIO3_IRQn : IGPIO3 interrupt through debounce (Interrupt clear-enable bit)
bits : 13 - 26 (14 bit)
access : read-write
GPIO4_IRQn : GPIO4 interrupt through debounce (Interrupt clear-enable bit)
bits : 14 - 28 (15 bit)
access : read-write
SWTIM_IRQn : Software timer Interrupt (clear-enable bit)
bits : 15 - 30 (16 bit)
access : read-write
WKUP_QUADEC_IRQn : Combined Wake up Capture Timer, GPIO and QuadDecoder interrupt (clear-enable bit)
bits : 16 - 32 (17 bit)
access : read-write
PCM_IRQn : PCM Interrupt (clear-enable bit)
bits : 17 - 34 (18 bit)
access : read-write
SRC_IN_IRQn : Sample rate converter input Interrupt (clear-enable bit)
bits : 18 - 36 (19 bit)
access : read-write
SRC_OUT_IRQn : Sample rate converter output Interrupt (clear-enable bit)
bits : 19 - 38 (20 bit)
access : read-write
DMA_IRQn : DMA Interrupt (clear-enable bit)
bits : 20 - 40 (21 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.