\n

DMEM_NS

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :

Registers

IPVERSION

ECCERRADDR1

ECCMERRIND

IF

IEN

CMD

CTRL

ECCERRADDR0


IPVERSION

No Description
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IPVERSION IPVERSION read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPVERSION

IPVERSION : New BitField
bits : 0 - 0 (1 bit)
access : read-only


ECCERRADDR1

No Description
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

ECCERRADDR1 ECCERRADDR1 read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ADDR

ADDR : ECC Error Address
bits : 0 - 31 (32 bit)
access : read-only


ECCMERRIND

No Description
address_offset : 0x1C Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

ECCMERRIND ECCMERRIND read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 P0 P1

P0 : Multiple ECC errors on AHB port 0
bits : 0 - 0 (1 bit)
access : read-only

P1 : Multiple ECC errors on AHB port 1
bits : 1 - 1 (1 bit)
access : read-only


IF

No Description
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IF IF read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AHB0ERR1B AHB1ERR1B AHB0ERR2B AHB1ERR2B

AHB0ERR1B : AHB0 1-bit ECC Error Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write

AHB1ERR1B : AHB1 1-bit ECC Error Interrupt Flag
bits : 1 - 1 (1 bit)
access : read-write

AHB0ERR2B : AHB0 2-bit ECC Error Interrupt Flag
bits : 4 - 4 (1 bit)
access : read-write

AHB1ERR2B : AHB1 2-bit ECC Error Interrupt Flag
bits : 5 - 5 (1 bit)
access : read-write


IEN

No Description
address_offset : 0x24 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IEN IEN read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AHB0ERR1B AHB1ERR1B AHB0ERR2B AHB1ERR2B

AHB0ERR1B : AHB0 1-bit ECC Error Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write

AHB1ERR1B : AHB1 1-bit ECC Error Interrupt Enable
bits : 1 - 1 (1 bit)
access : read-write

AHB0ERR2B : AHB0 2-bit ECC Error Interrupt Enable
bits : 4 - 4 (1 bit)
access : read-write

AHB1ERR2B : AHB1 2-bit ECC Error Interrupt Enable
bits : 5 - 5 (1 bit)
access : read-write


CMD

No Description
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0

CMD CMD write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CLEARECCADDR0 CLEARECCADDR1

CLEARECCADDR0 : Clear ECCERRADDR0
bits : 0 - 0 (1 bit)
access : write-only

CLEARECCADDR1 : Clear ECCERRADDR1
bits : 1 - 1 (1 bit)
access : write-only


CTRL

No Description
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CTRL CTRL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ECCEN ECCWEN ECCERRFAULTEN AHBPORTPRIORITY ADDRFAULTEN

ECCEN : Enable ECC functionality
bits : 0 - 0 (1 bit)
access : read-write

ECCWEN : Enable ECC syndrome writes
bits : 1 - 1 (1 bit)
access : read-write

ECCERRFAULTEN : ECC Error bus fault enable
bits : 2 - 2 (1 bit)
access : read-write

AHBPORTPRIORITY : AHB port arbitration priority
bits : 3 - 5 (3 bit)
access : read-write

Enumeration:

0 : NONE

No AHB port have raised priority.

1 : PORT0

AHB port 0 has raised priority.

2 : PORT1

AHB port 1 has raised priority.

End of enumeration elements list.

ADDRFAULTEN : Address fault bus fault enable
bits : 6 - 6 (1 bit)
access : read-write


ECCERRADDR0

No Description
address_offset : 0xC Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

ECCERRADDR0 ECCERRADDR0 read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ADDR

ADDR : ECC Error Address
bits : 0 - 31 (32 bit)
access : read-only



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.