\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
No Description
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IPVERSION : ip version id
bits : 0 - 31 (32 bit)
access : read-only
Port control
address_offset : 0x30 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
No Description
address_offset : 0x300 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
LOCKKEY : Configuration Lock Key
bits : 0 - 15 (16 bit)
access : write-only
Enumeration:
42292 : UNLOCK
Unlock code
End of enumeration elements list.
No Description
address_offset : 0x310 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
LOCK : GPIO LOCK status
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
0 : UNLOCKED
Registers are unlocked
1 : LOCKED
Registers are locked
End of enumeration elements list.
A Bus allocation
address_offset : 0x320 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AEVEN0 : A Bus Even 0
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
End of enumeration elements list.
AEVEN1 : A Bus Even 1
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
End of enumeration elements list.
AODD0 : A Bus Odd 0
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
End of enumeration elements list.
AODD1 : A Bus Odd 1
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
End of enumeration elements list.
B Bus allocation
address_offset : 0x324 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEVEN0 : B Bus Even 0
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
End of enumeration elements list.
BEVEN1 : B Bus Even 1
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
End of enumeration elements list.
BODD0 : B Bus Odd 0
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
End of enumeration elements list.
BODD1 : B Bus Odd 1
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
End of enumeration elements list.
CD Bus allocation
address_offset : 0x328 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CDEVEN0 : CD Bus Even 0
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
End of enumeration elements list.
CDEVEN1 : CD Bus Even 1
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
End of enumeration elements list.
CDODD0 : CD Bus Odd 0
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
End of enumeration elements list.
CDODD1 : CD Bus Odd 1
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
End of enumeration elements list.
mode low
address_offset : 0x34 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE6 : MODE n
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE7 : MODE n
bits : 28 - 31 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
mode high
address_offset : 0x3C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
data out
address_offset : 0x40 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 10 (11 bit)
access : read-write
External Interrupt Port Select Low
address_offset : 0x400 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPSEL0 : External Interrupt Port Select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL1 : External Interrupt Port Select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL2 : External Interrupt Port Select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL3 : External Interrupt Port Select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL4 : External Interrupt Port Select
bits : 16 - 17 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL5 : External Interrupt Port Select
bits : 20 - 21 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL6 : External Interrupt Port Select
bits : 24 - 25 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL7 : External Interrupt Port Select
bits : 28 - 29 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
External interrupt Port Select High
address_offset : 0x404 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPSEL0 : External Interrupt Port Select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL1 : External Interrupt Port Select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL2 : External Interrupt Port Select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL3 : External Interrupt Port Select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
External Interrupt Pin Select Low
address_offset : 0x408 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPINSEL0 : External Interrupt Pin select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL1 : External Interrupt Pin select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL2 : External Interrupt Pin select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL3 : External Interrupt Pin select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL4 : External Interrupt Pin select
bits : 16 - 17 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL5 : External Interrupt Pin select
bits : 20 - 21 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL6 : External Interrupt Pin select
bits : 24 - 25 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL7 : External Interrupt Pin select
bits : 28 - 29 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
External Interrupt Pin Select High
address_offset : 0x40C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPINSEL0 : External Interrupt Pin select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
EXTIPINSEL1 : External Interrupt Pin select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
EXTIPINSEL2 : External Interrupt Pin select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
EXTIPINSEL3 : External Interrupt Pin select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
External Interrupt Rising Edge Trigger
address_offset : 0x410 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIRISE : EXT Int Rise
bits : 0 - 11 (12 bit)
access : read-write
External Interrupt Falling Edge Trigger
address_offset : 0x414 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIFALL : EXT Int FALL
bits : 0 - 11 (12 bit)
access : read-write
Interrupt Flag
address_offset : 0x420 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIF0 : External Pin Flag
bits : 0 - 0 (1 bit)
access : read-write
EXTIF1 : External Pin Flag
bits : 1 - 1 (1 bit)
access : read-write
EXTIF2 : External Pin Flag
bits : 2 - 2 (1 bit)
access : read-write
EXTIF3 : External Pin Flag
bits : 3 - 3 (1 bit)
access : read-write
EXTIF4 : External Pin Flag
bits : 4 - 4 (1 bit)
access : read-write
EXTIF5 : External Pin Flag
bits : 5 - 5 (1 bit)
access : read-write
EXTIF6 : External Pin Flag
bits : 6 - 6 (1 bit)
access : read-write
EXTIF7 : External Pin Flag
bits : 7 - 7 (1 bit)
access : read-write
EXTIF8 : External Pin Flag
bits : 8 - 8 (1 bit)
access : read-write
EXTIF9 : External Pin Flag
bits : 9 - 9 (1 bit)
access : read-write
EXTIF10 : External Pin Flag
bits : 10 - 10 (1 bit)
access : read-write
EXTIF11 : External Pin Flag
bits : 11 - 11 (1 bit)
access : read-write
EM4WU : EM4 wake up
bits : 16 - 27 (12 bit)
access : read-write
Interrupt Enable
address_offset : 0x424 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIEN0 : External Pin Enable
bits : 0 - 0 (1 bit)
access : read-write
EXTIEN1 : External Pin Enable
bits : 1 - 1 (1 bit)
access : read-write
EXTIEN2 : External Pin Enable
bits : 2 - 2 (1 bit)
access : read-write
EXTIEN3 : External Pin Enable
bits : 3 - 3 (1 bit)
access : read-write
EXTIEN4 : External Pin Enable
bits : 4 - 4 (1 bit)
access : read-write
EXTIEN5 : External Pin Enable
bits : 5 - 5 (1 bit)
access : read-write
EXTIEN6 : External Pin Enable
bits : 6 - 6 (1 bit)
access : read-write
EXTIEN7 : External Pin Enable
bits : 7 - 7 (1 bit)
access : read-write
EXTIEN8 : External Pin Enable
bits : 8 - 8 (1 bit)
access : read-write
EXTIEN9 : External Pin Enable
bits : 9 - 9 (1 bit)
access : read-write
EXTIEN10 : External Pin Enable
bits : 10 - 10 (1 bit)
access : read-write
EXTIEN11 : External Pin Enable
bits : 11 - 11 (1 bit)
access : read-write
EM4WUIEN0 : EM4 Wake Up Interrupt En
bits : 16 - 16 (1 bit)
access : read-write
EM4WUIEN1 : EM4 Wake Up Interrupt En
bits : 17 - 17 (1 bit)
access : read-write
EM4WUIEN2 : EM4 Wake Up Interrupt En
bits : 18 - 18 (1 bit)
access : read-write
EM4WUIEN3 : EM4 Wake Up Interrupt En
bits : 19 - 19 (1 bit)
access : read-write
EM4WUIEN4 : EM4 Wake Up Interrupt En
bits : 20 - 20 (1 bit)
access : read-write
EM4WUIEN5 : EM4 Wake Up Interrupt En
bits : 21 - 21 (1 bit)
access : read-write
EM4WUIEN6 : EM4 Wake Up Interrupt En
bits : 22 - 22 (1 bit)
access : read-write
EM4WUIEN7 : EM4 Wake Up Interrupt En
bits : 23 - 23 (1 bit)
access : read-write
EM4WUIEN8 : EM4 Wake Up Interrupt En
bits : 24 - 24 (1 bit)
access : read-write
EM4WUIEN9 : EM4 Wake Up Interrupt En
bits : 25 - 25 (1 bit)
access : read-write
EM4WUIEN10 : EM4 Wake Up Interrupt En
bits : 26 - 26 (1 bit)
access : read-write
EM4WUIEN11 : EM4 Wake Up Interrupt En
bits : 27 - 27 (1 bit)
access : read-write
No Description
address_offset : 0x42C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM4WUEN : EM4 wake up enable
bits : 16 - 27 (12 bit)
access : read-write
No Description
address_offset : 0x430 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM4WUPOL : EM4 Wake-Up Polarity
bits : 16 - 27 (12 bit)
access : read-write
data in
address_offset : 0x44 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 10 (11 bit)
access : read-only
No Description
address_offset : 0x440 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SWCLKTCKPEN : Route Pin Enable
bits : 0 - 0 (1 bit)
access : read-write
SWDIOTMSPEN : Route Location 0
bits : 1 - 1 (1 bit)
access : read-write
TDOPEN : JTAG Test Debug Output Pin Enable
bits : 2 - 2 (1 bit)
access : read-write
TDIPEN : JTAG Test Debug Input Pin Enable
bits : 3 - 3 (1 bit)
access : read-write
No Description
address_offset : 0x444 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SWVPEN : Serial Wire Viewer Output Pin Enable
bits : 0 - 0 (1 bit)
access : read-write
TRACECLKPEN : Trace Clk Pin Enable
bits : 1 - 1 (1 bit)
access : read-write
TRACEDATA0PEN : Trace Data0 Pin Enable
bits : 2 - 2 (1 bit)
access : read-write
TRACEDATA1PEN : Trace Data1 Pin Enable
bits : 3 - 3 (1 bit)
access : read-write
TRACEDATA2PEN : Trace Data2 Pin Enable
bits : 4 - 4 (1 bit)
access : read-write
TRACEDATA3PEN : Trace Data3 Pin Enable
bits : 5 - 5 (1 bit)
access : read-write
LCD Segment Enable
address_offset : 0x460 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LCDSEGALLOC : LCD Segment Allocation
bits : 0 - 19 (20 bit)
access : read-write
LCD Common Enable
address_offset : 0x470 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LCDCOMALLOC : LCD Common Allocation
bits : 0 - 3 (4 bit)
access : read-write
ACMP0 pin enable
address_offset : 0x480 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACMPOUTPEN : ACMPOUT pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ACMPOUT port/pin select
address_offset : 0x484 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ACMPOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ACMPOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
ACMP1 pin enable
address_offset : 0x48C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACMPOUTPEN : ACMPOUT pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ACMPOUT port/pin select
address_offset : 0x490 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ACMPOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ACMPOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CMU pin enable
address_offset : 0x498 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CLKOUT0PEN : CLKOUT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CLKOUT1PEN : CLKOUT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CLKOUT2PEN : CLKOUT2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CLKIN0 port/pin select
address_offset : 0x49C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKIN0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKIN0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CLKOUT0 port/pin select
address_offset : 0x4A0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKOUT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKOUT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CLKOUT1 port/pin select
address_offset : 0x4A4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKOUT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKOUT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CLKOUT2 port/pin select
address_offset : 0x4A8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKOUT2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKOUT2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
EUSART0 pin enable
address_offset : 0x4C4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSPEN : CS pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
RTSPEN : RTS pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
RXPEN : RX pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
SCLKPEN : SCLK pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
TXPEN : TX pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CS port/pin select
address_offset : 0x4C8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CS pin select register
bits : 16 - 19 (4 bit)
access : read-write
CTS port/pin select
address_offset : 0x4CC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RTS port/pin select
address_offset : 0x4D0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RX port/pin select
address_offset : 0x4D4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RX pin select register
bits : 16 - 19 (4 bit)
access : read-write
SCLK port/pin select
address_offset : 0x4D8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
TX port/pin select
address_offset : 0x4DC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TX pin select register
bits : 16 - 19 (4 bit)
access : read-write
EUSART1 pin enable
address_offset : 0x4E4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSPEN : CS pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
RTSPEN : RTS pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
RXPEN : RX pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
SCLKPEN : SCLK pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
TXPEN : TX pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CS port/pin select
address_offset : 0x4E8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CS pin select register
bits : 16 - 19 (4 bit)
access : read-write
CTS port/pin select
address_offset : 0x4EC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RTS port/pin select
address_offset : 0x4F0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RX port/pin select
address_offset : 0x4F4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RX pin select register
bits : 16 - 19 (4 bit)
access : read-write
SCLK port/pin select
address_offset : 0x4F8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
TX port/pin select
address_offset : 0x4FC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TX pin select register
bits : 16 - 19 (4 bit)
access : read-write
EUSART2 pin enable
address_offset : 0x504 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSPEN : CS pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
RTSPEN : RTS pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
RXPEN : RX pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
SCLKPEN : SCLK pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
TXPEN : TX pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CS port/pin select
address_offset : 0x508 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CS pin select register
bits : 16 - 19 (4 bit)
access : read-write
CTS port/pin select
address_offset : 0x50C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RTS port/pin select
address_offset : 0x510 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RX port/pin select
address_offset : 0x514 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RX pin select register
bits : 16 - 19 (4 bit)
access : read-write
SCLK port/pin select
address_offset : 0x518 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
TX port/pin select
address_offset : 0x51C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TX pin select register
bits : 16 - 19 (4 bit)
access : read-write
FRC pin enable
address_offset : 0x524 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DCLKPEN : DCLK pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
DFRAMEPEN : DFRAME pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
DOUTPEN : DOUT pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
DCLK port/pin select
address_offset : 0x528 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
DFRAME port/pin select
address_offset : 0x52C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DFRAME port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DFRAME pin select register
bits : 16 - 19 (4 bit)
access : read-write
DOUT port/pin select
address_offset : 0x530 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
I2C0 pin enable
address_offset : 0x538 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCLPEN : SCL pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
SDAPEN : SDA pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
SCL port/pin select
address_offset : 0x53C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCL port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCL pin select register
bits : 16 - 19 (4 bit)
access : read-write
SDA port/pin select
address_offset : 0x540 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SDA port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SDA pin select register
bits : 16 - 19 (4 bit)
access : read-write
I2C1 pin enable
address_offset : 0x548 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCLPEN : SCL pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
SDAPEN : SDA pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
SCL port/pin select
address_offset : 0x54C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCL port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCL pin select register
bits : 16 - 19 (4 bit)
access : read-write
SDA port/pin select
address_offset : 0x550 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SDA port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SDA pin select register
bits : 16 - 19 (4 bit)
access : read-write
KEYSCAN pin enable
address_offset : 0x558 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COLOUT0PEN : COLOUT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
COLOUT1PEN : COLOUT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
COLOUT2PEN : COLOUT2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
COLOUT3PEN : COLOUT3 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
COLOUT4PEN : COLOUT4 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
COLOUT5PEN : COLOUT5 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
COLOUT6PEN : COLOUT6 pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
COLOUT7PEN : COLOUT7 pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
COLOUT0 port/pin select
address_offset : 0x55C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT1 port/pin select
address_offset : 0x560 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT2 port/pin select
address_offset : 0x564 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT3 port/pin select
address_offset : 0x568 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT4 port/pin select
address_offset : 0x56C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT5 port/pin select
address_offset : 0x570 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT6 port/pin select
address_offset : 0x574 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT6 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT6 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT7 port/pin select
address_offset : 0x578 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT7 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT7 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE0 port/pin select
address_offset : 0x57C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE1 port/pin select
address_offset : 0x580 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE2 port/pin select
address_offset : 0x584 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE3 port/pin select
address_offset : 0x588 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE4 port/pin select
address_offset : 0x58C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE5 port/pin select
address_offset : 0x590 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
LESENSE pin enable
address_offset : 0x598 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CH0OUTPEN : CH0OUT pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CH1OUTPEN : CH1OUT pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CH2OUTPEN : CH2OUT pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CH3OUTPEN : CH3OUT pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CH4OUTPEN : CH4OUT pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CH5OUTPEN : CH5OUT pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CH6OUTPEN : CH6OUT pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
CH7OUTPEN : CH7OUT pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
CH8OUTPEN : CH8OUT pin enable control bit
bits : 8 - 8 (1 bit)
access : read-write
CH9OUTPEN : CH9OUT pin enable control bit
bits : 9 - 9 (1 bit)
access : read-write
CH10OUTPEN : CH10OUT pin enable control bit
bits : 10 - 10 (1 bit)
access : read-write
CH11OUTPEN : CH11OUT pin enable control bit
bits : 11 - 11 (1 bit)
access : read-write
CH12OUTPEN : CH12OUT pin enable control bit
bits : 12 - 12 (1 bit)
access : read-write
CH13OUTPEN : CH13OUT pin enable control bit
bits : 13 - 13 (1 bit)
access : read-write
CH14OUTPEN : CH14OUT pin enable control bit
bits : 14 - 14 (1 bit)
access : read-write
CH15OUTPEN : CH15OUT pin enable control bit
bits : 15 - 15 (1 bit)
access : read-write
CH0OUT port/pin select
address_offset : 0x59C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH0OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH0OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH1OUT port/pin select
address_offset : 0x5A0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH1OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH1OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH2OUT port/pin select
address_offset : 0x5A4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH2OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH2OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH3OUT port/pin select
address_offset : 0x5A8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH3OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH3OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH4OUT port/pin select
address_offset : 0x5AC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH4OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH4OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH5OUT port/pin select
address_offset : 0x5B0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH5OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH5OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH6OUT port/pin select
address_offset : 0x5B4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH6OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH6OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH7OUT port/pin select
address_offset : 0x5B8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH7OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH7OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH8OUT port/pin select
address_offset : 0x5BC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH8OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH8OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH9OUT port/pin select
address_offset : 0x5C0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH9OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH9OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH10OUT port/pin select
address_offset : 0x5C4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH10OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH10OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH11OUT port/pin select
address_offset : 0x5C8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH11OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH11OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH12OUT port/pin select
address_offset : 0x5CC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH12OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH12OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH13OUT port/pin select
address_offset : 0x5D0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH13OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH13OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH14OUT port/pin select
address_offset : 0x5D4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH14OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH14OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CH15OUT port/pin select
address_offset : 0x5D8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CH15OUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CH15OUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
LETIMER pin enable
address_offset : 0x5E0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUT0PEN : OUT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
OUT1PEN : OUT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
OUT0 port/pin select
address_offset : 0x5E4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : OUT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : OUT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
OUT1 port/pin select
address_offset : 0x5E8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : OUT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : OUT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
MODEM pin enable
address_offset : 0x5F0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ANT0PEN : ANT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ANT1PEN : ANT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
ANTROLLOVERPEN : ANTROLLOVER pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
ANTRR0PEN : ANTRR0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
ANTRR1PEN : ANTRR1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
ANTRR2PEN : ANTRR2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
ANTRR3PEN : ANTRR3 pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
ANTRR4PEN : ANTRR4 pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
ANTRR5PEN : ANTRR5 pin enable control bit
bits : 8 - 8 (1 bit)
access : read-write
ANTSWENPEN : ANTSWEN pin enable control bit
bits : 9 - 9 (1 bit)
access : read-write
ANTSWUSPEN : ANTSWUS pin enable control bit
bits : 10 - 10 (1 bit)
access : read-write
ANTTRIGPEN : ANTTRIG pin enable control bit
bits : 11 - 11 (1 bit)
access : read-write
ANTTRIGSTOPPEN : ANTTRIGSTOP pin enable control bit
bits : 12 - 12 (1 bit)
access : read-write
DCLKPEN : DCLK pin enable control bit
bits : 13 - 13 (1 bit)
access : read-write
DOUTPEN : DOUT pin enable control bit
bits : 14 - 14 (1 bit)
access : read-write
ANT0 port/pin select
address_offset : 0x5F4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANT1 port/pin select
address_offset : 0x5F8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTROLLOVER port/pin select
address_offset : 0x5FC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTROLLOVER port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTROLLOVER pin select register
bits : 16 - 19 (4 bit)
access : read-write
Port control
address_offset : 0x60 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
ANTRR0 port/pin select
address_offset : 0x600 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR1 port/pin select
address_offset : 0x604 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR2 port/pin select
address_offset : 0x608 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR3 port/pin select
address_offset : 0x60C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR4 port/pin select
address_offset : 0x610 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR5 port/pin select
address_offset : 0x614 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTSWEN port/pin select
address_offset : 0x618 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTSWEN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTSWEN pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTSWUS port/pin select
address_offset : 0x61C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTSWUS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTSWUS pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTTRIG port/pin select
address_offset : 0x620 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTTRIG port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTTRIG pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTTRIGSTOP port/pin select
address_offset : 0x624 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTTRIGSTOP port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTTRIGSTOP pin select register
bits : 16 - 19 (4 bit)
access : read-write
DCLK port/pin select
address_offset : 0x628 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
DIN port/pin select
address_offset : 0x62C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DIN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DIN pin select register
bits : 16 - 19 (4 bit)
access : read-write
DOUT port/pin select
address_offset : 0x630 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
S0IN port/pin select
address_offset : 0x63C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : S0IN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : S0IN pin select register
bits : 16 - 19 (4 bit)
access : read-write
mode low
address_offset : 0x64 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE6 : MODE n
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
S1IN port/pin select
address_offset : 0x640 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : S1IN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : S1IN pin select register
bits : 16 - 19 (4 bit)
access : read-write
PRS0 pin enable
address_offset : 0x648 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ASYNCH0PEN : ASYNCH0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ASYNCH1PEN : ASYNCH1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
ASYNCH2PEN : ASYNCH2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
ASYNCH3PEN : ASYNCH3 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
ASYNCH4PEN : ASYNCH4 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
ASYNCH5PEN : ASYNCH5 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
ASYNCH6PEN : ASYNCH6 pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
ASYNCH7PEN : ASYNCH7 pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
ASYNCH8PEN : ASYNCH8 pin enable control bit
bits : 8 - 8 (1 bit)
access : read-write
ASYNCH9PEN : ASYNCH9 pin enable control bit
bits : 9 - 9 (1 bit)
access : read-write
ASYNCH10PEN : ASYNCH10 pin enable control bit
bits : 10 - 10 (1 bit)
access : read-write
ASYNCH11PEN : ASYNCH11 pin enable control bit
bits : 11 - 11 (1 bit)
access : read-write
SYNCH0PEN : SYNCH0 pin enable control bit
bits : 12 - 12 (1 bit)
access : read-write
SYNCH1PEN : SYNCH1 pin enable control bit
bits : 13 - 13 (1 bit)
access : read-write
SYNCH2PEN : SYNCH2 pin enable control bit
bits : 14 - 14 (1 bit)
access : read-write
SYNCH3PEN : SYNCH3 pin enable control bit
bits : 15 - 15 (1 bit)
access : read-write
ASYNCH0 port/pin select
address_offset : 0x64C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH1 port/pin select
address_offset : 0x650 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH2 port/pin select
address_offset : 0x654 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH3 port/pin select
address_offset : 0x658 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH4 port/pin select
address_offset : 0x65C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH5 port/pin select
address_offset : 0x660 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH6 port/pin select
address_offset : 0x664 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH6 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH6 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH7 port/pin select
address_offset : 0x668 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH7 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH7 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH8 port/pin select
address_offset : 0x66C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH8 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH8 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH9 port/pin select
address_offset : 0x670 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH9 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH9 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH10 port/pin select
address_offset : 0x674 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH10 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH10 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH11 port/pin select
address_offset : 0x678 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH11 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH11 pin select register
bits : 16 - 19 (4 bit)
access : read-write
SYNCH0 port/pin select
address_offset : 0x67C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
SYNCH1 port/pin select
address_offset : 0x680 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
SYNCH2 port/pin select
address_offset : 0x684 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
SYNCH3 port/pin select
address_offset : 0x688 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
BUFOUTREQINASYNC port/pin select
address_offset : 0x6F0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : BUFOUTREQINASYNC port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : BUFOUTREQINASYNC pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER0 pin enable
address_offset : 0x6F8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x6FC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
data out
address_offset : 0x70 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 6 (7 bit)
access : read-write
CC1 port/pin select
address_offset : 0x700 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x704 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI0 port/pin select
address_offset : 0x708 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI1 port/pin select
address_offset : 0x70C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI2 port/pin select
address_offset : 0x710 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER1 pin enable
address_offset : 0x718 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x71C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x720 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x724 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI0 port/pin select
address_offset : 0x728 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI1 port/pin select
address_offset : 0x72C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI2 port/pin select
address_offset : 0x730 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER2 pin enable
address_offset : 0x738 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x73C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
data in
address_offset : 0x74 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 6 (7 bit)
access : read-only
CC1 port/pin select
address_offset : 0x740 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x744 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI0 port/pin select
address_offset : 0x748 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI1 port/pin select
address_offset : 0x74C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI2 port/pin select
address_offset : 0x750 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER3 pin enable
address_offset : 0x758 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x75C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x760 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x764 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI0 port/pin select
address_offset : 0x768 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI1 port/pin select
address_offset : 0x76C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI2 port/pin select
address_offset : 0x770 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER4 pin enable
address_offset : 0x778 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x77C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x780 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x784 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI0 port/pin select
address_offset : 0x788 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI1 port/pin select
address_offset : 0x78C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CDTI2 port/pin select
address_offset : 0x790 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
USART0 pin enable
address_offset : 0x798 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSPEN : CS pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
RTSPEN : RTS pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
RXPEN : RX pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CLKPEN : SCLK pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
TXPEN : TX pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CS port/pin select
address_offset : 0x79C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CS pin select register
bits : 16 - 19 (4 bit)
access : read-write
CTS port/pin select
address_offset : 0x7A0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RTS port/pin select
address_offset : 0x7A4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RX port/pin select
address_offset : 0x7A8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RX pin select register
bits : 16 - 19 (4 bit)
access : read-write
SCLK port/pin select
address_offset : 0x7AC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
TX port/pin select
address_offset : 0x7B0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TX pin select register
bits : 16 - 19 (4 bit)
access : read-write
Port control
address_offset : 0x90 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
mode low
address_offset : 0x94 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE6 : MODE n
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE7 : MODE n
bits : 28 - 31 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
mode high
address_offset : 0x9C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
data out
address_offset : 0xA0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 9 (10 bit)
access : read-write
data in
address_offset : 0xA4 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 9 (10 bit)
access : read-only
Port control
address_offset : 0xC0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
mode low
address_offset : 0xC4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
data out
address_offset : 0xD0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 5 (6 bit)
access : read-write
data in
address_offset : 0xD4 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 5 (6 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.