\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
No Description
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IPVERSION : New BitField
bits : 0 - 0 (1 bit)
access : read-only
No Description
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ADDR : ECC Error Address
bits : 0 - 31 (32 bit)
access : read-only
No Description
address_offset : 0x1C Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
P0 : Multiple ECC errors on AHB port 0
bits : 0 - 0 (1 bit)
access : read-only
P1 : Multiple ECC errors on AHB port 1
bits : 1 - 1 (1 bit)
access : read-only
No Description
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AHB0ERR1B : AHB0 1-bit ECC Error Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write
AHB1ERR1B : AHB1 1-bit ECC Error Interrupt Flag
bits : 1 - 1 (1 bit)
access : read-write
AHB0ERR2B : AHB0 2-bit ECC Error Interrupt Flag
bits : 4 - 4 (1 bit)
access : read-write
AHB1ERR2B : AHB1 2-bit ECC Error Interrupt Flag
bits : 5 - 5 (1 bit)
access : read-write
No Description
address_offset : 0x24 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AHB0ERR1B : AHB0 1-bit ECC Error Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
AHB1ERR1B : AHB1 1-bit ECC Error Interrupt Enable
bits : 1 - 1 (1 bit)
access : read-write
AHB0ERR2B : AHB0 2-bit ECC Error Interrupt Enable
bits : 4 - 4 (1 bit)
access : read-write
AHB1ERR2B : AHB1 2-bit ECC Error Interrupt Enable
bits : 5 - 5 (1 bit)
access : read-write
No Description
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
CLEARECCADDR0 : Clear ECCERRADDR0
bits : 0 - 0 (1 bit)
access : write-only
CLEARECCADDR1 : Clear ECCERRADDR1
bits : 1 - 1 (1 bit)
access : write-only
No Description
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ECCEN : Enable ECC functionality
bits : 0 - 0 (1 bit)
access : read-write
ECCWEN : Enable ECC syndrome writes
bits : 1 - 1 (1 bit)
access : read-write
ECCERRFAULTEN : ECC Error bus fault enable
bits : 2 - 2 (1 bit)
access : read-write
AHBPORTPRIORITY : AHB port arbitration priority
bits : 3 - 5 (3 bit)
access : read-write
Enumeration:
0 : NONE
No AHB port have raised priority.
1 : PORT0
AHB port 0 has raised priority.
2 : PORT1
AHB port 1 has raised priority.
End of enumeration elements list.
ADDRFAULTEN : Address fault bus fault enable
bits : 6 - 6 (1 bit)
access : read-write
No Description
address_offset : 0xC Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ADDR : ECC Error Address
bits : 0 - 31 (32 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.