\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
Contains the LFRCO ip version
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IPVERSION : IP version ID
bits : 0 - 31 (32 bit)
access : read-only
Interrupt flag register
address_offset : 0x14 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RDY : Ready Flag
bits : 0 - 0 (1 bit)
access : read-write
POSEDGE : Rising Edge Flag
bits : 1 - 1 (1 bit)
access : read-write
NEGEDGE : Falling Edge Flag
bits : 2 - 2 (1 bit)
access : read-write
TCDONE : Temperature Check Done Flag
bits : 8 - 8 (1 bit)
access : read-write
CALDONE : Calibration Done Flag
bits : 9 - 9 (1 bit)
access : read-write
TEMPCHANGE : Temperature Change Flag
bits : 10 - 10 (1 bit)
access : read-write
SCHEDERR : Scheduling Error Flag
bits : 16 - 16 (1 bit)
access : read-write
TCOOR : Temperature Check Out Of Range Flag
bits : 17 - 17 (1 bit)
access : read-write
CALOOR : Calibration Out Of Range Flag
bits : 18 - 18 (1 bit)
access : read-write
Interrupt enable register
address_offset : 0x18 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RDY : Ready Enable
bits : 0 - 0 (1 bit)
access : read-write
POSEDGE : Rising Edge Enable
bits : 1 - 1 (1 bit)
access : read-write
NEGEDGE : Falling Edge Enable
bits : 2 - 2 (1 bit)
access : read-write
TCDONE : Temperature Check Done Enable
bits : 8 - 8 (1 bit)
access : read-write
CALDONE : Calibration Done Enable
bits : 9 - 9 (1 bit)
access : read-write
TEMPCHANGE : Temperature Change Enable
bits : 10 - 10 (1 bit)
access : read-write
SCHEDERR : Scheduling Error Enable
bits : 16 - 16 (1 bit)
access : read-write
TCOOR : Temperature Check Out Of Range Enable
bits : 17 - 17 (1 bit)
access : read-write
CALOOR : Calibration Out Of Range Enable
bits : 18 - 18 (1 bit)
access : read-write
Configuration lock register. Locks and unlocks access to configuration registers.
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
LOCKKEY : Lock Key
bits : 0 - 15 (16 bit)
access : write-only
Enumeration:
0 : LOCK
Lock Configuration Registers
3987 : UNLOCK
Unlock Configuration Registers
End of enumeration elements list.
Configuration register
address_offset : 0x24 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
HIGHPRECEN : High Precision Enable
bits : 0 - 0 (1 bit)
access : read-write
Nominal calibration register
address_offset : 0x2C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NOMCALCNT : Nominal Calibration Count
bits : 0 - 20 (21 bit)
access : read-write
Nominal calibration inverted register
address_offset : 0x30 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NOMCALCNTINV : Nominal Calibration Count Inverted
bits : 0 - 16 (17 bit)
access : read-write
Command register
address_offset : 0x34 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
REDUCETCINT : Reduce Temperature Check Interval
bits : 0 - 0 (1 bit)
access : write-only
Control register
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FORCEEN : Force Enable
bits : 0 - 0 (1 bit)
access : read-write
DISONDEMAND : Disable On-Demand
bits : 1 - 1 (1 bit)
access : read-write
Status register
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
RDY : Ready Status
bits : 0 - 0 (1 bit)
access : read-only
ENS : Enabled Status
bits : 16 - 16 (1 bit)
access : read-only
LOCK : Lock Status
bits : 31 - 31 (1 bit)
access : read-only
Enumeration:
0 : UNLOCKED
Access to configuration registers not locked
1 : LOCKED
Access to configuration registers locked
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.