\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
No Description
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IPVERSION : ip version id
bits : 0 - 31 (32 bit)
access : read-only
Port control
address_offset : 0x30 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
No Description
address_offset : 0x300 Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
LOCKKEY : Configuration Lock Key
bits : 0 - 15 (16 bit)
access : write-only
Enumeration:
42292 : UNLOCK
Unlock code
End of enumeration elements list.
No Description
address_offset : 0x310 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
LOCK : GPIO LOCK status
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
0 : UNLOCKED
Registers are unlocked
1 : LOCKED
Registers are locked
End of enumeration elements list.
A Bus allocation
address_offset : 0x320 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AEVEN0 : A Bus Even 0
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
5 : VDAC1CH0
The bus is allocated to VDAC1 CH0
14 : DIAGA
The bus is allocated to DIAGA
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
AEVEN1 : A Bus Even 1
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
5 : VDAC1CH1
The bus is allocated to VDAC1 CH1
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
AODD0 : A Bus Odd 0
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
5 : VDAC1CH0
The bus is allocated to VDAC1 CH0
14 : DIAGA
The bus is allocated to DIAGA
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
AODD1 : A Bus Odd 1
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
5 : VDAC1CH1
The bus is allocated to VDAC1 CH1
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
B Bus allocation
address_offset : 0x324 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEVEN0 : B Bus Even 0
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
5 : VDAC1CH0
The bus is allocated to VDAC1 CH0
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
BEVEN1 : B Bus Even 1
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
5 : VDAC1CH1
The bus is allocated to VDAC1 CH1
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
BODD0 : B Bus Odd 0
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
5 : VDAC1CH0
The bus is allocated to VDAC1 CH0
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
BODD1 : B Bus Odd 1
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
5 : VDAC1CH1
The bus is allocated to VDAC1 CH1
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
CD Bus allocation
address_offset : 0x328 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CDEVEN0 : CD Bus Even 0
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
5 : VDAC1CH0
The bus is allocated to VDAC1 CH0
11 : REPEFUSE
The bus is allocated to Repair EFUSE programming voltage
12 : PMON
The bus is allocated to Process Monitor
13 : EFUSE
The bus is allocated for EFUSE programming voltage
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
CDEVEN1 : CD Bus Even 1
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
5 : VDAC1CH1
The bus is allocated to VDAC1 CH1
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
CDODD0 : CD Bus Odd 0
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH0
The bus is allocated to VDAC0 CH0
5 : VDAC1CH0
The bus is allocated to VDAC1 CH0
12 : PMON
The bus is allocated to Process Monitor
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
CDODD1 : CD Bus Odd 1
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : TRISTATE
The bus is not allocated
1 : ADC0
The bus is allocated to ADC0
2 : ACMP0
The bus is allocated to ACMP0
3 : ACMP1
The bus is allocated to ACMP1
4 : VDAC0CH1
The bus is allocated to VDAC0 CH1
5 : VDAC1CH1
The bus is allocated to VDAC1 CH1
15 : DEBUG
DEBUG mode, bus allocated to all clients
End of enumeration elements list.
ABUS AODD0 Switch Register
address_offset : 0x330 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AODD0SWITCH : AODD0 switch register
bits : 0 - 4 (5 bit)
access : read-write
ABUS AODD1 Switch Register
address_offset : 0x334 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AODD1SWITCH : AODD1 switch register
bits : 0 - 4 (5 bit)
access : read-write
ABUS AEVEN0 Switch Register
address_offset : 0x338 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AEVEN0SWITCH : AEVEN0 switch register
bits : 0 - 4 (5 bit)
access : read-write
ABUS AEVEN1 Switch Register
address_offset : 0x33C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AEVEN1SWITCH : AEVEN1 switch register
bits : 0 - 4 (5 bit)
access : read-write
mode low
address_offset : 0x34 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE6 : MODE n
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE7 : MODE n
bits : 28 - 31 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
ABUS BODD0 Switch Register
address_offset : 0x340 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BODD0SWITCH : BODD0 Switch Reg
bits : 0 - 2 (3 bit)
access : read-write
ABUS BODD1 Switch Register
address_offset : 0x344 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BODD1SWITCH : BODD1 Switch Reg
bits : 0 - 2 (3 bit)
access : read-write
ABUS BEVEN0 Switch Register
address_offset : 0x348 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEVEN0SWITCH : BEVEN0 switch register
bits : 0 - 2 (3 bit)
access : read-write
ABUS BEVEN1 Switch Register
address_offset : 0x34C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEVEN1SWITCH : BEVEN1 switch register
bits : 0 - 2 (3 bit)
access : read-write
ABUS CDODD0 Switch Register
address_offset : 0x350 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CODD0SWITCH : CODD0 switch register
bits : 0 - 4 (5 bit)
access : read-write
DODD0SWITCH : DODD0 switch register
bits : 16 - 18 (3 bit)
access : read-write
ABUS CDODD1 Switch Register
address_offset : 0x354 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CODD1SWITCH : CODD1 switch register
bits : 0 - 4 (5 bit)
access : read-write
DODD1SWITCH : DODD1 switch register
bits : 16 - 18 (3 bit)
access : read-write
ABUS CDEVEN0 Switch Register
address_offset : 0x358 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CEVEN0SWITCH : CEVEN0 switch register
bits : 0 - 4 (5 bit)
access : read-write
DEVEN0SWITCH : DEVEN0 switch register
bits : 16 - 18 (3 bit)
access : read-write
ABUS CDEVEN1 Switch Register
address_offset : 0x35C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CEVEN1SWITCH : CEVEN1 switch register
bits : 0 - 4 (5 bit)
access : read-write
DEVEN1SWITCH : DEVEN1 switch register
bits : 16 - 18 (3 bit)
access : read-write
mode high
address_offset : 0x3C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
data out
address_offset : 0x40 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 9 (10 bit)
access : read-write
External Interrupt Port Select Low
address_offset : 0x400 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPSEL0 : External Interrupt Port Select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL1 : External Interrupt Port Select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL2 : External Interrupt Port Select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL3 : External Interrupt Port Select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL4 : External Interrupt Port Select
bits : 16 - 17 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL5 : External Interrupt Port Select
bits : 20 - 21 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL6 : External Interrupt Port Select
bits : 24 - 25 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL7 : External Interrupt Port Select
bits : 28 - 29 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
External interrupt Port Select High
address_offset : 0x404 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPSEL0 : External Interrupt Port Select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL1 : External Interrupt Port Select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL2 : External Interrupt Port Select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
EXTIPSEL3 : External Interrupt Port Select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PORTA
Port A group selected
1 : PORTB
Port B group selected
2 : PORTC
Port C group selected
3 : PORTD
Port D group selected
End of enumeration elements list.
External Interrupt Pin Select Low
address_offset : 0x408 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPINSEL0 : External Interrupt Pin select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL1 : External Interrupt Pin select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL2 : External Interrupt Pin select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL3 : External Interrupt Pin select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL4 : External Interrupt Pin select
bits : 16 - 17 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL5 : External Interrupt Pin select
bits : 20 - 21 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL6 : External Interrupt Pin select
bits : 24 - 25 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
EXTIPINSEL7 : External Interrupt Pin select
bits : 28 - 29 (2 bit)
access : read-write
Enumeration:
0 : PIN0
OFFSET=0
1 : PIN1
OFFSET=1
2 : PIN2
OFFSET=2
3 : PIN3
OFFSET=3
End of enumeration elements list.
External Interrupt Pin Select High
address_offset : 0x40C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIPINSEL0 : External Interrupt Pin select
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
EXTIPINSEL1 : External Interrupt Pin select
bits : 4 - 5 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
EXTIPINSEL2 : External Interrupt Pin select
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
EXTIPINSEL3 : External Interrupt Pin select
bits : 12 - 13 (2 bit)
access : read-write
Enumeration:
0 : PIN8
OFFSET=8
1 : PIN9
OFFSET=9
2 : PIN10
OFFSET=10
3 : PIN11
OFFSET=11
End of enumeration elements list.
External Interrupt Rising Edge Trigger
address_offset : 0x410 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIRISE : EXT Int Rise
bits : 0 - 11 (12 bit)
access : read-write
External Interrupt Falling Edge Trigger
address_offset : 0x414 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIFALL : EXT Int FALL
bits : 0 - 11 (12 bit)
access : read-write
Interrupt Flag
address_offset : 0x420 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIF0 : External Pin Flag
bits : 0 - 0 (1 bit)
access : read-write
EXTIF1 : External Pin Flag
bits : 1 - 1 (1 bit)
access : read-write
EXTIF2 : External Pin Flag
bits : 2 - 2 (1 bit)
access : read-write
EXTIF3 : External Pin Flag
bits : 3 - 3 (1 bit)
access : read-write
EXTIF4 : External Pin Flag
bits : 4 - 4 (1 bit)
access : read-write
EXTIF5 : External Pin Flag
bits : 5 - 5 (1 bit)
access : read-write
EXTIF6 : External Pin Flag
bits : 6 - 6 (1 bit)
access : read-write
EXTIF7 : External Pin Flag
bits : 7 - 7 (1 bit)
access : read-write
EXTIF8 : External Pin Flag
bits : 8 - 8 (1 bit)
access : read-write
EXTIF9 : External Pin Flag
bits : 9 - 9 (1 bit)
access : read-write
EXTIF10 : External Pin Flag
bits : 10 - 10 (1 bit)
access : read-write
EXTIF11 : External Pin Flag
bits : 11 - 11 (1 bit)
access : read-write
EM4WU : EM4 wake up
bits : 16 - 27 (12 bit)
access : read-write
Interrupt Enable
address_offset : 0x424 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EXTIEN0 : External Pin Enable
bits : 0 - 0 (1 bit)
access : read-write
EXTIEN1 : External Pin Enable
bits : 1 - 1 (1 bit)
access : read-write
EXTIEN2 : External Pin Enable
bits : 2 - 2 (1 bit)
access : read-write
EXTIEN3 : External Pin Enable
bits : 3 - 3 (1 bit)
access : read-write
EXTIEN4 : External Pin Enable
bits : 4 - 4 (1 bit)
access : read-write
EXTIEN5 : External Pin Enable
bits : 5 - 5 (1 bit)
access : read-write
EXTIEN6 : External Pin Enable
bits : 6 - 6 (1 bit)
access : read-write
EXTIEN7 : External Pin Enable
bits : 7 - 7 (1 bit)
access : read-write
EXTIEN8 : External Pin Enable
bits : 8 - 8 (1 bit)
access : read-write
EXTIEN9 : External Pin Enable
bits : 9 - 9 (1 bit)
access : read-write
EXTIEN10 : External Pin Enable
bits : 10 - 10 (1 bit)
access : read-write
EXTIEN11 : External Pin Enable
bits : 11 - 11 (1 bit)
access : read-write
EM4WUIEN0 : EM4 Wake Up Interrupt En
bits : 16 - 16 (1 bit)
access : read-write
EM4WUIEN1 : EM4 Wake Up Interrupt En
bits : 17 - 17 (1 bit)
access : read-write
EM4WUIEN2 : EM4 Wake Up Interrupt En
bits : 18 - 18 (1 bit)
access : read-write
EM4WUIEN3 : EM4 Wake Up Interrupt En
bits : 19 - 19 (1 bit)
access : read-write
EM4WUIEN4 : EM4 Wake Up Interrupt En
bits : 20 - 20 (1 bit)
access : read-write
EM4WUIEN5 : EM4 Wake Up Interrupt En
bits : 21 - 21 (1 bit)
access : read-write
EM4WUIEN6 : EM4 Wake Up Interrupt En
bits : 22 - 22 (1 bit)
access : read-write
EM4WUIEN7 : EM4 Wake Up Interrupt En
bits : 23 - 23 (1 bit)
access : read-write
EM4WUIEN8 : EM4 Wake Up Interrupt En
bits : 24 - 24 (1 bit)
access : read-write
EM4WUIEN9 : EM4 Wake Up Interrupt En
bits : 25 - 25 (1 bit)
access : read-write
EM4WUIEN10 : EM4 Wake Up Interrupt En
bits : 26 - 26 (1 bit)
access : read-write
EM4WUIEN11 : EM4 Wake Up Interrupt En
bits : 27 - 27 (1 bit)
access : read-write
No Description
address_offset : 0x42C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM4WUEN : EM4 wake up enable
bits : 16 - 27 (12 bit)
access : read-write
No Description
address_offset : 0x430 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EM4WUPOL : EM4 Wake-Up Polarity
bits : 16 - 27 (12 bit)
access : read-write
data in
address_offset : 0x44 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 9 (10 bit)
access : read-only
No Description
address_offset : 0x440 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SWCLKTCKPEN : Route Pin Enable
bits : 0 - 0 (1 bit)
access : read-write
SWDIOTMSPEN : Route Location 0
bits : 1 - 1 (1 bit)
access : read-write
TDOPEN : JTAG Test Debug Output Pin Enable
bits : 2 - 2 (1 bit)
access : read-write
TDIPEN : JTAG Test Debug Input Pin Enable
bits : 3 - 3 (1 bit)
access : read-write
No Description
address_offset : 0x444 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SWVPEN : Serial Wire Viewer Output Pin Enable
bits : 0 - 0 (1 bit)
access : read-write
TRACECLKPEN : Trace Clk Pin Enable
bits : 1 - 1 (1 bit)
access : read-write
TRACEDATA0PEN : Trace Data0 Pin Enable
bits : 2 - 2 (1 bit)
access : read-write
TRACEDATA1PEN : Trace Data1 Pin Enable
bits : 3 - 3 (1 bit)
access : read-write
TRACEDATA2PEN : Trace Data2 Pin Enable
bits : 4 - 4 (1 bit)
access : read-write
TRACEDATA3PEN : Trace Data3 Pin Enable
bits : 5 - 5 (1 bit)
access : read-write
ACMP0 pin enable
address_offset : 0x450 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACMPOUTPEN : ACMPOUT pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ACMPOUT port/pin select
address_offset : 0x454 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ACMPOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ACMPOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
ACMP1 pin enable
address_offset : 0x45C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACMPOUTPEN : ACMPOUT pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ACMPOUT port/pin select
address_offset : 0x460 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ACMPOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ACMPOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
CMU pin enable
address_offset : 0x468 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CLKOUT0PEN : CLKOUT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CLKOUT1PEN : CLKOUT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CLKOUT2PEN : CLKOUT2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CLKIN0 port/pin select
address_offset : 0x46C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKIN0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKIN0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CLKOUT0 port/pin select
address_offset : 0x470 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKOUT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKOUT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CLKOUT1 port/pin select
address_offset : 0x474 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKOUT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKOUT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CLKOUT2 port/pin select
address_offset : 0x478 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CLKOUT2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CLKOUT2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DCDC pin enable
address_offset : 0x484 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DCDCCOREHIDDENPEN : DCDCCOREHIDDEN pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
DCDCCOREHIDDEN port/pin select
address_offset : 0x488 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DCDCCOREHIDDEN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DCDCCOREHIDDEN pin select register
bits : 16 - 19 (4 bit)
access : read-write
EUSART0 pin enable
address_offset : 0x494 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSPEN : CS pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
RTSPEN : RTS pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
RXPEN : RX pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
SCLKPEN : SCLK pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
TXPEN : TX pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CS port/pin select
address_offset : 0x498 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CS pin select register
bits : 16 - 19 (4 bit)
access : read-write
CTS port/pin select
address_offset : 0x49C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RTS port/pin select
address_offset : 0x4A0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RX port/pin select
address_offset : 0x4A4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RX pin select register
bits : 16 - 19 (4 bit)
access : read-write
SCLK port/pin select
address_offset : 0x4A8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
TX port/pin select
address_offset : 0x4AC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TX pin select register
bits : 16 - 19 (4 bit)
access : read-write
EUSART1 pin enable
address_offset : 0x4B4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSPEN : CS pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
RTSPEN : RTS pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
RXPEN : RX pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
SCLKPEN : SCLK pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
TXPEN : TX pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CS port/pin select
address_offset : 0x4B8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CS pin select register
bits : 16 - 19 (4 bit)
access : read-write
CTS port/pin select
address_offset : 0x4BC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RTS port/pin select
address_offset : 0x4C0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RX port/pin select
address_offset : 0x4C4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RX pin select register
bits : 16 - 19 (4 bit)
access : read-write
SCLK port/pin select
address_offset : 0x4C8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
TX port/pin select
address_offset : 0x4CC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TX pin select register
bits : 16 - 19 (4 bit)
access : read-write
FRC pin enable
address_offset : 0x4D4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DCLKPEN : DCLK pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
DFRAMEPEN : DFRAME pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
DOUTPEN : DOUT pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
DCLK port/pin select
address_offset : 0x4D8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
DFRAME port/pin select
address_offset : 0x4DC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DFRAME port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DFRAME pin select register
bits : 16 - 19 (4 bit)
access : read-write
DOUT port/pin select
address_offset : 0x4E0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
I2C0 pin enable
address_offset : 0x4E8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCLPEN : SCL pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
SDAPEN : SDA pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
SCL port/pin select
address_offset : 0x4EC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCL port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCL pin select register
bits : 16 - 19 (4 bit)
access : read-write
SDA port/pin select
address_offset : 0x4F0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SDA port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SDA pin select register
bits : 16 - 19 (4 bit)
access : read-write
I2C1 pin enable
address_offset : 0x4F8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCLPEN : SCL pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
SDAPEN : SDA pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
SCL port/pin select
address_offset : 0x4FC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCL port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCL pin select register
bits : 16 - 19 (4 bit)
access : read-write
SDA port/pin select
address_offset : 0x500 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SDA port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SDA pin select register
bits : 16 - 19 (4 bit)
access : read-write
KEYPAD pin enable
address_offset : 0x508 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COLOUT0PEN : COLOUT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
COLOUT1PEN : COLOUT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
COLOUT2PEN : COLOUT2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
COLOUT3PEN : COLOUT3 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
COLOUT4PEN : COLOUT4 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
COLOUT5PEN : COLOUT5 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
COLOUT6PEN : COLOUT6 pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
COLOUT7PEN : COLOUT7 pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
COLOUT0 port/pin select
address_offset : 0x50C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT1 port/pin select
address_offset : 0x510 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT2 port/pin select
address_offset : 0x514 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT3 port/pin select
address_offset : 0x518 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT4 port/pin select
address_offset : 0x51C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT5 port/pin select
address_offset : 0x520 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT6 port/pin select
address_offset : 0x524 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT6 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT6 pin select register
bits : 16 - 19 (4 bit)
access : read-write
COLOUT7 port/pin select
address_offset : 0x528 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : COLOUT7 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : COLOUT7 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE0 port/pin select
address_offset : 0x52C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE1 port/pin select
address_offset : 0x530 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE2 port/pin select
address_offset : 0x534 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE3 port/pin select
address_offset : 0x538 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE4 port/pin select
address_offset : 0x53C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ROWSENSE5 port/pin select
address_offset : 0x540 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ROWSENSE5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ROWSENSE5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
LETIMER pin enable
address_offset : 0x548 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUT0PEN : OUT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
OUT1PEN : OUT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
OUT0 port/pin select
address_offset : 0x54C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : OUT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : OUT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
OUT1 port/pin select
address_offset : 0x550 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : OUT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : OUT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
MODEM pin enable
address_offset : 0x558 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ANT0PEN : ANT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ANT1PEN : ANT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
ANTROLLOVERPEN : ANTROLLOVER pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
ANTRR0PEN : ANTRR0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
ANTRR1PEN : ANTRR1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
ANTRR2PEN : ANTRR2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
ANTRR3PEN : ANTRR3 pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
ANTRR4PEN : ANTRR4 pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
ANTRR5PEN : ANTRR5 pin enable control bit
bits : 8 - 8 (1 bit)
access : read-write
ANTSWENPEN : ANTSWEN pin enable control bit
bits : 9 - 9 (1 bit)
access : read-write
ANTSWUSPEN : ANTSWUS pin enable control bit
bits : 10 - 10 (1 bit)
access : read-write
ANTTRIGPEN : ANTTRIG pin enable control bit
bits : 11 - 11 (1 bit)
access : read-write
ANTTRIGSTOPPEN : ANTTRIGSTOP pin enable control bit
bits : 12 - 12 (1 bit)
access : read-write
DCLKPEN : DCLK pin enable control bit
bits : 13 - 13 (1 bit)
access : read-write
DOUTPEN : DOUT pin enable control bit
bits : 14 - 14 (1 bit)
access : read-write
ANT0 port/pin select
address_offset : 0x55C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANT1 port/pin select
address_offset : 0x560 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTROLLOVER port/pin select
address_offset : 0x564 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTROLLOVER port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTROLLOVER pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR0 port/pin select
address_offset : 0x568 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR1 port/pin select
address_offset : 0x56C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR2 port/pin select
address_offset : 0x570 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR3 port/pin select
address_offset : 0x574 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR4 port/pin select
address_offset : 0x578 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTRR5 port/pin select
address_offset : 0x57C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTRR5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTRR5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTSWEN port/pin select
address_offset : 0x580 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTSWEN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTSWEN pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTSWUS port/pin select
address_offset : 0x584 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTSWUS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTSWUS pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTTRIG port/pin select
address_offset : 0x588 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTTRIG port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTTRIG pin select register
bits : 16 - 19 (4 bit)
access : read-write
ANTTRIGSTOP port/pin select
address_offset : 0x58C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ANTTRIGSTOP port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ANTTRIGSTOP pin select register
bits : 16 - 19 (4 bit)
access : read-write
DCLK port/pin select
address_offset : 0x590 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
DIN port/pin select
address_offset : 0x594 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DIN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DIN pin select register
bits : 16 - 19 (4 bit)
access : read-write
DOUT port/pin select
address_offset : 0x598 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DOUT port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DOUT pin select register
bits : 16 - 19 (4 bit)
access : read-write
S0IN port/pin select
address_offset : 0x5A4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : S0IN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : S0IN pin select register
bits : 16 - 19 (4 bit)
access : read-write
S1IN port/pin select
address_offset : 0x5A8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : S1IN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : S1IN pin select register
bits : 16 - 19 (4 bit)
access : read-write
PRS0 pin enable
address_offset : 0x5B0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ASYNCH0PEN : ASYNCH0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
ASYNCH1PEN : ASYNCH1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
ASYNCH2PEN : ASYNCH2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
ASYNCH3PEN : ASYNCH3 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
ASYNCH4PEN : ASYNCH4 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
ASYNCH5PEN : ASYNCH5 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
ASYNCH6PEN : ASYNCH6 pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
ASYNCH7PEN : ASYNCH7 pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
ASYNCH8PEN : ASYNCH8 pin enable control bit
bits : 8 - 8 (1 bit)
access : read-write
ASYNCH9PEN : ASYNCH9 pin enable control bit
bits : 9 - 9 (1 bit)
access : read-write
ASYNCH10PEN : ASYNCH10 pin enable control bit
bits : 10 - 10 (1 bit)
access : read-write
ASYNCH11PEN : ASYNCH11 pin enable control bit
bits : 11 - 11 (1 bit)
access : read-write
ASYNCH12PEN : ASYNCH12 pin enable control bit
bits : 12 - 12 (1 bit)
access : read-write
ASYNCH13PEN : ASYNCH13 pin enable control bit
bits : 13 - 13 (1 bit)
access : read-write
ASYNCH14PEN : ASYNCH14 pin enable control bit
bits : 14 - 14 (1 bit)
access : read-write
ASYNCH15PEN : ASYNCH15 pin enable control bit
bits : 15 - 15 (1 bit)
access : read-write
SYNCH0PEN : SYNCH0 pin enable control bit
bits : 16 - 16 (1 bit)
access : read-write
SYNCH1PEN : SYNCH1 pin enable control bit
bits : 17 - 17 (1 bit)
access : read-write
SYNCH2PEN : SYNCH2 pin enable control bit
bits : 18 - 18 (1 bit)
access : read-write
SYNCH3PEN : SYNCH3 pin enable control bit
bits : 19 - 19 (1 bit)
access : read-write
ASYNCH0 port/pin select
address_offset : 0x5B4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH1 port/pin select
address_offset : 0x5B8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH2 port/pin select
address_offset : 0x5BC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH3 port/pin select
address_offset : 0x5C0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH4 port/pin select
address_offset : 0x5C4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH5 port/pin select
address_offset : 0x5C8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH6 port/pin select
address_offset : 0x5CC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH6 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH6 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH7 port/pin select
address_offset : 0x5D0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH7 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH7 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH8 port/pin select
address_offset : 0x5D4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH8 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH8 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH9 port/pin select
address_offset : 0x5D8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH9 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH9 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH10 port/pin select
address_offset : 0x5DC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH10 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH10 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH11 port/pin select
address_offset : 0x5E0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH11 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH11 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH12 port/pin select
address_offset : 0x5E4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH12 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH12 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH13 port/pin select
address_offset : 0x5E8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH13 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH13 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH14 port/pin select
address_offset : 0x5EC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH14 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH14 pin select register
bits : 16 - 19 (4 bit)
access : read-write
ASYNCH15 port/pin select
address_offset : 0x5F0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : ASYNCH15 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : ASYNCH15 pin select register
bits : 16 - 19 (4 bit)
access : read-write
SYNCH0 port/pin select
address_offset : 0x5F4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
SYNCH1 port/pin select
address_offset : 0x5F8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
SYNCH2 port/pin select
address_offset : 0x5FC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
Port control
address_offset : 0x60 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
SYNCH3 port/pin select
address_offset : 0x600 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SYNCH3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SYNCH3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
RAC pin enable
address_offset : 0x608 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LNAENPEN : LNAEN pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
PAENPEN : PAEN pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
LNAEN port/pin select
address_offset : 0x60C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : LNAEN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : LNAEN pin select register
bits : 16 - 19 (4 bit)
access : read-write
PAEN port/pin select
address_offset : 0x610 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : PAEN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : PAEN pin select register
bits : 16 - 19 (4 bit)
access : read-write
RFECA0 pin enable
address_offset : 0x618 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATAOUT0PEN : DATAOUT0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
DATAOUT1PEN : DATAOUT1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
DATAOUT2PEN : DATAOUT2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
DATAOUT3PEN : DATAOUT3 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
DATAOUT4PEN : DATAOUT4 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
DATAOUT5PEN : DATAOUT5 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
DATAOUT6PEN : DATAOUT6 pin enable control bit
bits : 6 - 6 (1 bit)
access : read-write
DATAOUT7PEN : DATAOUT7 pin enable control bit
bits : 7 - 7 (1 bit)
access : read-write
DATAOUT8PEN : DATAOUT8 pin enable control bit
bits : 8 - 8 (1 bit)
access : read-write
DATAOUT9PEN : DATAOUT9 pin enable control bit
bits : 9 - 9 (1 bit)
access : read-write
DATAOUT10PEN : DATAOUT10 pin enable control bit
bits : 10 - 10 (1 bit)
access : read-write
DATAOUT11PEN : DATAOUT11 pin enable control bit
bits : 11 - 11 (1 bit)
access : read-write
DATAOUT12PEN : DATAOUT12 pin enable control bit
bits : 12 - 12 (1 bit)
access : read-write
DATAOUT13PEN : DATAOUT13 pin enable control bit
bits : 13 - 13 (1 bit)
access : read-write
DATAOUT14PEN : DATAOUT14 pin enable control bit
bits : 14 - 14 (1 bit)
access : read-write
DATAOUT15PEN : DATAOUT15 pin enable control bit
bits : 15 - 15 (1 bit)
access : read-write
DATAOUT16PEN : DATAOUT16 pin enable control bit
bits : 16 - 16 (1 bit)
access : read-write
DATAOUT17PEN : DATAOUT17 pin enable control bit
bits : 17 - 17 (1 bit)
access : read-write
DATAOUT18PEN : DATAOUT18 pin enable control bit
bits : 18 - 18 (1 bit)
access : read-write
DATAVALIDPEN : DATAVALID pin enable control bit
bits : 19 - 19 (1 bit)
access : read-write
DATAOUT0 port/pin select
address_offset : 0x61C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT1 port/pin select
address_offset : 0x620 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT2 port/pin select
address_offset : 0x624 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT3 port/pin select
address_offset : 0x628 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT3 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT3 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT4 port/pin select
address_offset : 0x62C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT4 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT4 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT5 port/pin select
address_offset : 0x630 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT5 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT5 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT6 port/pin select
address_offset : 0x634 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT6 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT6 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT7 port/pin select
address_offset : 0x638 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT7 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT7 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT8 port/pin select
address_offset : 0x63C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT8 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT8 pin select register
bits : 16 - 19 (4 bit)
access : read-write
mode low
address_offset : 0x64 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
DATAOUT9 port/pin select
address_offset : 0x640 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT9 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT9 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT10 port/pin select
address_offset : 0x644 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT10 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT10 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT11 port/pin select
address_offset : 0x648 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT11 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT11 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT12 port/pin select
address_offset : 0x64C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT12 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT12 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT13 port/pin select
address_offset : 0x650 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT13 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT13 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT14 port/pin select
address_offset : 0x654 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT14 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT14 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT15 port/pin select
address_offset : 0x658 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT15 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT15 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT16 port/pin select
address_offset : 0x65C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT16 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT16 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT17 port/pin select
address_offset : 0x660 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT17 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT17 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAOUT18 port/pin select
address_offset : 0x664 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAOUT18 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAOUT18 pin select register
bits : 16 - 19 (4 bit)
access : read-write
DATAVALID port/pin select
address_offset : 0x668 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : DATAVALID port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : DATAVALID pin select register
bits : 16 - 19 (4 bit)
access : read-write
TRIGGERIN port/pin select
address_offset : 0x66C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TRIGGERIN port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TRIGGERIN pin select register
bits : 16 - 19 (4 bit)
access : read-write
BUFOUTREQINASYNC port/pin select
address_offset : 0x678 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : BUFOUTREQINASYNC port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : BUFOUTREQINASYNC pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER0 pin enable
address_offset : 0x680 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x684 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x688 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x68C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC0 port/pin select
address_offset : 0x690 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC1 port/pin select
address_offset : 0x694 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC2 port/pin select
address_offset : 0x698 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER1 pin enable
address_offset : 0x6A0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x6A4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x6A8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x6AC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC0 port/pin select
address_offset : 0x6B0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC1 port/pin select
address_offset : 0x6B4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC2 port/pin select
address_offset : 0x6B8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER2 pin enable
address_offset : 0x6C0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x6C4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x6C8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x6CC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC0 port/pin select
address_offset : 0x6D0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC1 port/pin select
address_offset : 0x6D4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC2 port/pin select
address_offset : 0x6D8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
TIMER3 pin enable
address_offset : 0x6E0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x6E4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x6E8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x6EC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC0 port/pin select
address_offset : 0x6F0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC1 port/pin select
address_offset : 0x6F4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC2 port/pin select
address_offset : 0x6F8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
data out
address_offset : 0x70 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 5 (6 bit)
access : read-write
TIMER4 pin enable
address_offset : 0x700 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CC0PEN : CC0 pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
CC1PEN : CC1 pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
CC2PEN : CC2 pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CCC0PEN : CCC0 pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
CCC1PEN : CCC1 pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CCC2PEN : CCC2 pin enable control bit
bits : 5 - 5 (1 bit)
access : read-write
CC0 port/pin select
address_offset : 0x704 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC1 port/pin select
address_offset : 0x708 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CC2 port/pin select
address_offset : 0x70C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC0 port/pin select
address_offset : 0x710 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC0 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC0 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC1 port/pin select
address_offset : 0x714 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC1 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC1 pin select register
bits : 16 - 19 (4 bit)
access : read-write
CCC2 port/pin select
address_offset : 0x718 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CCC2 port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CCC2 pin select register
bits : 16 - 19 (4 bit)
access : read-write
USART0 pin enable
address_offset : 0x720 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSPEN : CS pin enable control bit
bits : 0 - 0 (1 bit)
access : read-write
RTSPEN : RTS pin enable control bit
bits : 1 - 1 (1 bit)
access : read-write
RXPEN : RX pin enable control bit
bits : 2 - 2 (1 bit)
access : read-write
CLKPEN : SCLK pin enable control bit
bits : 3 - 3 (1 bit)
access : read-write
TXPEN : TX pin enable control bit
bits : 4 - 4 (1 bit)
access : read-write
CS port/pin select
address_offset : 0x724 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CS pin select register
bits : 16 - 19 (4 bit)
access : read-write
CTS port/pin select
address_offset : 0x728 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : CTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : CTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RTS port/pin select
address_offset : 0x72C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RTS port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RTS pin select register
bits : 16 - 19 (4 bit)
access : read-write
RX port/pin select
address_offset : 0x730 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : RX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : RX pin select register
bits : 16 - 19 (4 bit)
access : read-write
SCLK port/pin select
address_offset : 0x734 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : SCLK port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : SCLK pin select register
bits : 16 - 19 (4 bit)
access : read-write
TX port/pin select
address_offset : 0x738 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PORT : TX port select register
bits : 0 - 1 (2 bit)
access : read-write
PIN : TX pin select register
bits : 16 - 19 (4 bit)
access : read-write
data in
address_offset : 0x74 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 5 (6 bit)
access : read-only
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x740 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDPORTACTRL : CTRL Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDPORTAMODEL : MODEL Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDPORTAMODEH : MODEH Protection Bit
bits : 15 - 15 (1 bit)
access : read-write
RATDPORTADOUT : DOUT Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDPORTBCTRL : CTRL Protection Bit
bits : 24 - 24 (1 bit)
access : read-write
RATDPORTBMODEL : MODEL Protection Bit
bits : 25 - 25 (1 bit)
access : read-write
RATDPORTBMODEH : MODEH Protection Bit
bits : 27 - 27 (1 bit)
access : read-write
RATDPORTBDOUT : DOUT Protection Bit
bits : 28 - 28 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x744 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDPORTCCTRL : CTRL Protection Bit
bits : 4 - 4 (1 bit)
access : read-write
RATDPORTCMODEL : MODEL Protection Bit
bits : 5 - 5 (1 bit)
access : read-write
RATDPORTCMODEH : MODEH Protection Bit
bits : 7 - 7 (1 bit)
access : read-write
RATDPORTCDOUT : DOUT Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDPORTDCTRL : CTRL Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDPORTDMODEL : MODEL Protection Bit
bits : 17 - 17 (1 bit)
access : read-write
RATDPORTDMODEH : MODEH Protection Bit
bits : 19 - 19 (1 bit)
access : read-write
RATDPORTDDOUT : DOUT Protection Bit
bits : 20 - 20 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x758 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDLOCK : LOCK Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDABUSALLOC : ABUSALLOC Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDBBUSALLOC : BBUSALLOC Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDCDBUSALLOC : CDBUSALLOC Protection Bit
bits : 10 - 10 (1 bit)
access : read-write
RATDAODD0SWITCH : AODD0SWITCH Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDAODD1SWITCH : AODD1SWITCH Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDAEVEN0SWITCH : AEVEN0SWITCH Protection Bit
bits : 14 - 14 (1 bit)
access : read-write
RATDAEVEN1SWITCH : AEVEN1SWITCH Protection Bit
bits : 15 - 15 (1 bit)
access : read-write
RATDBODD0SWITCH : BODD0SWITCH Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDBODD1SWITCH : BODD1SWITCH Protection Bit
bits : 17 - 17 (1 bit)
access : read-write
RATDBEVEN0SWITCH : BEVEN0SWITCH Protection Bit
bits : 18 - 18 (1 bit)
access : read-write
RATDBEVEN1SWITCH : BEVEN1SWITCH Protection Bit
bits : 19 - 19 (1 bit)
access : read-write
RATDCDODD0SWITCH : CDODD0SWITCH Protection Bit
bits : 20 - 20 (1 bit)
access : read-write
RATDCDODD1SWITCH : CDODD1SWITCH Protection Bit
bits : 21 - 21 (1 bit)
access : read-write
RATDCDEVEN0SWITCH : CDEVEN0SWITCH Protection Bit
bits : 22 - 22 (1 bit)
access : read-write
RATDCDEVEN1SWITCH : CDEVEN1SWITCH Protection Bit
bits : 23 - 23 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x760 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDEXTIPSELL : EXTIPSELL Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDEXTIPSELH : EXTIPSELH Protection Bit
bits : 1 - 1 (1 bit)
access : read-write
RATDEXTIPINSELL : EXTIPINSELL Protection Bit
bits : 2 - 2 (1 bit)
access : read-write
RATDEXTIPINSELH : EXTIPINSELH Protection Bit
bits : 3 - 3 (1 bit)
access : read-write
RATDEXTIRISE : EXTIRISE Protection Bit
bits : 4 - 4 (1 bit)
access : read-write
RATDEXTIFALL : EXTIFALL Protection Bit
bits : 5 - 5 (1 bit)
access : read-write
RATDIF : IF Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDIEN : IEN Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDEM4WUEN : EM4WUEN Protection Bit
bits : 11 - 11 (1 bit)
access : read-write
RATDEM4WUPOL : EM4WUPOL Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDDBGROUTEPEN : DBGROUTEPEN Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDTRACEROUTEPEN : TRACEROUTEPEN Protection Bit
bits : 17 - 17 (1 bit)
access : read-write
RATDDBUSACMP0ROUTEEN : ROUTEEN Protection Bit
bits : 20 - 20 (1 bit)
access : read-write
RATDDBUSACMP0ACMPOUTROUTE : ACMPOUTROUTE Protection Bit
bits : 21 - 21 (1 bit)
access : read-write
RATDDBUSACMP1ROUTEEN : ROUTEEN Protection Bit
bits : 23 - 23 (1 bit)
access : read-write
RATDDBUSACMP1ACMPOUTROUTE : ACMPOUTROUTE Protection Bit
bits : 24 - 24 (1 bit)
access : read-write
RATDDBUSCMUROUTEEN : ROUTEEN Protection Bit
bits : 26 - 26 (1 bit)
access : read-write
RATDDBUSCMUCLKIN0ROUTE : CLKIN0ROUTE Protection Bit
bits : 27 - 27 (1 bit)
access : read-write
RATDDBUSCMUCLKOUT0ROUTE : CLKOUT0ROUTE Protection Bit
bits : 28 - 28 (1 bit)
access : read-write
RATDDBUSCMUCLKOUT1ROUTE : CLKOUT1ROUTE Protection Bit
bits : 29 - 29 (1 bit)
access : read-write
RATDDBUSCMUCLKOUT2ROUTE : CLKOUT2ROUTE Protection Bit
bits : 30 - 30 (1 bit)
access : read-write
RATDDBUSCMUCLKOUTHIDDENROUTE : CLKOUTHIDDENROUTE Protection Bit
bits : 31 - 31 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x764 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDDBUSDCDCROUTEEN : ROUTEEN Protection Bit
bits : 1 - 1 (1 bit)
access : read-write
RATDDBUSDCDCDCDCCOREHIDDENROUTE : DCDCCOREHIDDENROUTE Protection Bit
bits : 2 - 2 (1 bit)
access : read-write
RATDDBUSDCDCDCDCVCMPHIDDENROUTE : DCDCVCMPHIDDENROUTE Protection Bit
bits : 3 - 3 (1 bit)
access : read-write
RATDDBUSEUSART0ROUTEEN : ROUTEEN Protection Bit
bits : 5 - 5 (1 bit)
access : read-write
RATDDBUSEUSART0CSROUTE : CSROUTE Protection Bit
bits : 6 - 6 (1 bit)
access : read-write
RATDDBUSEUSART0CTSROUTE : CTSROUTE Protection Bit
bits : 7 - 7 (1 bit)
access : read-write
RATDDBUSEUSART0RTSROUTE : RTSROUTE Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDDBUSEUSART0RXROUTE : RXROUTE Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDDBUSEUSART0SCLKROUTE : SCLKROUTE Protection Bit
bits : 10 - 10 (1 bit)
access : read-write
RATDDBUSEUSART0TXROUTE : TXROUTE Protection Bit
bits : 11 - 11 (1 bit)
access : read-write
RATDDBUSEUSART1ROUTEEN : ROUTEEN Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDDBUSEUSART1CSROUTE : CSROUTE Protection Bit
bits : 14 - 14 (1 bit)
access : read-write
RATDDBUSEUSART1CTSROUTE : CTSROUTE Protection Bit
bits : 15 - 15 (1 bit)
access : read-write
RATDDBUSEUSART1RTSROUTE : RTSROUTE Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDDBUSEUSART1RXROUTE : RXROUTE Protection Bit
bits : 17 - 17 (1 bit)
access : read-write
RATDDBUSEUSART1SCLKROUTE : SCLKROUTE Protection Bit
bits : 18 - 18 (1 bit)
access : read-write
RATDDBUSEUSART1TXROUTE : TXROUTE Protection Bit
bits : 19 - 19 (1 bit)
access : read-write
RATDDBUSFRCROUTEEN : ROUTEEN Protection Bit
bits : 21 - 21 (1 bit)
access : read-write
RATDDBUSFRCDCLKROUTE : DCLKROUTE Protection Bit
bits : 22 - 22 (1 bit)
access : read-write
RATDDBUSFRCDFRAMEROUTE : DFRAMEROUTE Protection Bit
bits : 23 - 23 (1 bit)
access : read-write
RATDDBUSFRCDOUTROUTE : DOUTROUTE Protection Bit
bits : 24 - 24 (1 bit)
access : read-write
RATDDBUSI2C0ROUTEEN : ROUTEEN Protection Bit
bits : 26 - 26 (1 bit)
access : read-write
RATDDBUSI2C0SCLROUTE : SCLROUTE Protection Bit
bits : 27 - 27 (1 bit)
access : read-write
RATDDBUSI2C0SDAROUTE : SDAROUTE Protection Bit
bits : 28 - 28 (1 bit)
access : read-write
RATDDBUSI2C1ROUTEEN : ROUTEEN Protection Bit
bits : 30 - 30 (1 bit)
access : read-write
RATDDBUSI2C1SCLROUTE : SCLROUTE Protection Bit
bits : 31 - 31 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x768 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDDBUSI2C1SDAROUTE : SDAROUTE Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDDBUSKEYPADROUTEEN : ROUTEEN Protection Bit
bits : 2 - 2 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT0ROUTE : COLOUT0ROUTE Protection Bit
bits : 3 - 3 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT1ROUTE : COLOUT1ROUTE Protection Bit
bits : 4 - 4 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT2ROUTE : COLOUT2ROUTE Protection Bit
bits : 5 - 5 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT3ROUTE : COLOUT3ROUTE Protection Bit
bits : 6 - 6 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT4ROUTE : COLOUT4ROUTE Protection Bit
bits : 7 - 7 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT5ROUTE : COLOUT5ROUTE Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT6ROUTE : COLOUT6ROUTE Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDDBUSKEYPADCOLOUT7ROUTE : COLOUT7ROUTE Protection Bit
bits : 10 - 10 (1 bit)
access : read-write
RATDDBUSKEYPADROWSENSE0ROUTE : ROWSENSE0ROUTE Protection Bit
bits : 11 - 11 (1 bit)
access : read-write
RATDDBUSKEYPADROWSENSE1ROUTE : ROWSENSE1ROUTE Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDDBUSKEYPADROWSENSE2ROUTE : ROWSENSE2ROUTE Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDDBUSKEYPADROWSENSE3ROUTE : ROWSENSE3ROUTE Protection Bit
bits : 14 - 14 (1 bit)
access : read-write
RATDDBUSKEYPADROWSENSE4ROUTE : ROWSENSE4ROUTE Protection Bit
bits : 15 - 15 (1 bit)
access : read-write
RATDDBUSKEYPADROWSENSE5ROUTE : ROWSENSE5ROUTE Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDDBUSLETIMERROUTEEN : ROUTEEN Protection Bit
bits : 18 - 18 (1 bit)
access : read-write
RATDDBUSLETIMEROUT0ROUTE : OUT0ROUTE Protection Bit
bits : 19 - 19 (1 bit)
access : read-write
RATDDBUSLETIMEROUT1ROUTE : OUT1ROUTE Protection Bit
bits : 20 - 20 (1 bit)
access : read-write
RATDDBUSMODEMROUTEEN : ROUTEEN Protection Bit
bits : 22 - 22 (1 bit)
access : read-write
RATDDBUSMODEMANT0ROUTE : ANT0ROUTE Protection Bit
bits : 23 - 23 (1 bit)
access : read-write
RATDDBUSMODEMANT1ROUTE : ANT1ROUTE Protection Bit
bits : 24 - 24 (1 bit)
access : read-write
RATDDBUSMODEMANTROLLOVERROUTE : ANTROLLOVERROUTE Protection Bit
bits : 25 - 25 (1 bit)
access : read-write
RATDDBUSMODEMANTRR0ROUTE : ANTRR0ROUTE Protection Bit
bits : 26 - 26 (1 bit)
access : read-write
RATDDBUSMODEMANTRR1ROUTE : ANTRR1ROUTE Protection Bit
bits : 27 - 27 (1 bit)
access : read-write
RATDDBUSMODEMANTRR2ROUTE : ANTRR2ROUTE Protection Bit
bits : 28 - 28 (1 bit)
access : read-write
RATDDBUSMODEMANTRR3ROUTE : ANTRR3ROUTE Protection Bit
bits : 29 - 29 (1 bit)
access : read-write
RATDDBUSMODEMANTRR4ROUTE : ANTRR4ROUTE Protection Bit
bits : 30 - 30 (1 bit)
access : read-write
RATDDBUSMODEMANTRR5ROUTE : ANTRR5ROUTE Protection Bit
bits : 31 - 31 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x76C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDDBUSMODEMANTSWENROUTE : ANTSWENROUTE Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDDBUSMODEMANTSWUSROUTE : ANTSWUSROUTE Protection Bit
bits : 1 - 1 (1 bit)
access : read-write
RATDDBUSMODEMANTTRIGROUTE : ANTTRIGROUTE Protection Bit
bits : 2 - 2 (1 bit)
access : read-write
RATDDBUSMODEMANTTRIGSTOPROUTE : ANTTRIGSTOPROUTE Protection Bit
bits : 3 - 3 (1 bit)
access : read-write
RATDDBUSMODEMDCLKROUTE : DCLKROUTE Protection Bit
bits : 4 - 4 (1 bit)
access : read-write
RATDDBUSMODEMDINROUTE : DINROUTE Protection Bit
bits : 5 - 5 (1 bit)
access : read-write
RATDDBUSMODEMDOUTROUTE : DOUTROUTE Protection Bit
bits : 6 - 6 (1 bit)
access : read-write
RATDDBUSPCNT0S0INROUTE : S0INROUTE Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDDBUSPCNT0S1INROUTE : S1INROUTE Protection Bit
bits : 10 - 10 (1 bit)
access : read-write
RATDDBUSPRS0ROUTEEN : ROUTEEN Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH0ROUTE : ASYNCH0ROUTE Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH1ROUTE : ASYNCH1ROUTE Protection Bit
bits : 14 - 14 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH2ROUTE : ASYNCH2ROUTE Protection Bit
bits : 15 - 15 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH3ROUTE : ASYNCH3ROUTE Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH4ROUTE : ASYNCH4ROUTE Protection Bit
bits : 17 - 17 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH5ROUTE : ASYNCH5ROUTE Protection Bit
bits : 18 - 18 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH6ROUTE : ASYNCH6ROUTE Protection Bit
bits : 19 - 19 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH7ROUTE : ASYNCH7ROUTE Protection Bit
bits : 20 - 20 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH8ROUTE : ASYNCH8ROUTE Protection Bit
bits : 21 - 21 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH9ROUTE : ASYNCH9ROUTE Protection Bit
bits : 22 - 22 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH10ROUTE : ASYNCH10ROUTE Protection Bit
bits : 23 - 23 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH11ROUTE : ASYNCH11ROUTE Protection Bit
bits : 24 - 24 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH12ROUTE : ASYNCH12ROUTE Protection Bit
bits : 25 - 25 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH13ROUTE : ASYNCH13ROUTE Protection Bit
bits : 26 - 26 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH14ROUTE : ASYNCH14ROUTE Protection Bit
bits : 27 - 27 (1 bit)
access : read-write
RATDDBUSPRS0ASYNCH15ROUTE : ASYNCH15ROUTE Protection Bit
bits : 28 - 28 (1 bit)
access : read-write
RATDDBUSPRS0SYNCH0ROUTE : SYNCH0ROUTE Protection Bit
bits : 29 - 29 (1 bit)
access : read-write
RATDDBUSPRS0SYNCH1ROUTE : SYNCH1ROUTE Protection Bit
bits : 30 - 30 (1 bit)
access : read-write
RATDDBUSPRS0SYNCH2ROUTE : SYNCH2ROUTE Protection Bit
bits : 31 - 31 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x770 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDDBUSPRS0SYNCH3ROUTE : SYNCH3ROUTE Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDDBUSRACROUTEEN : ROUTEEN Protection Bit
bits : 2 - 2 (1 bit)
access : read-write
RATDDBUSRACLNAENROUTE : LNAENROUTE Protection Bit
bits : 3 - 3 (1 bit)
access : read-write
RATDDBUSRACPAENROUTE : PAENROUTE Protection Bit
bits : 4 - 4 (1 bit)
access : read-write
RATDDBUSRFECA0ROUTEEN : ROUTEEN Protection Bit
bits : 6 - 6 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT0ROUTE : DATAOUT0ROUTE Protection Bit
bits : 7 - 7 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT1ROUTE : DATAOUT1ROUTE Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT2ROUTE : DATAOUT2ROUTE Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT3ROUTE : DATAOUT3ROUTE Protection Bit
bits : 10 - 10 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT4ROUTE : DATAOUT4ROUTE Protection Bit
bits : 11 - 11 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT5ROUTE : DATAOUT5ROUTE Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT6ROUTE : DATAOUT6ROUTE Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT7ROUTE : DATAOUT7ROUTE Protection Bit
bits : 14 - 14 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT8ROUTE : DATAOUT8ROUTE Protection Bit
bits : 15 - 15 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT9ROUTE : DATAOUT9ROUTE Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT10ROUTE : DATAOUT10ROUTE Protection Bit
bits : 17 - 17 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT11ROUTE : DATAOUT11ROUTE Protection Bit
bits : 18 - 18 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT12ROUTE : DATAOUT12ROUTE Protection Bit
bits : 19 - 19 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT13ROUTE : DATAOUT13ROUTE Protection Bit
bits : 20 - 20 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT14ROUTE : DATAOUT14ROUTE Protection Bit
bits : 21 - 21 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT15ROUTE : DATAOUT15ROUTE Protection Bit
bits : 22 - 22 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT16ROUTE : DATAOUT16ROUTE Protection Bit
bits : 23 - 23 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT17ROUTE : DATAOUT17ROUTE Protection Bit
bits : 24 - 24 (1 bit)
access : read-write
RATDDBUSRFECA0DATAOUT18ROUTE : DATAOUT18ROUTE Protection Bit
bits : 25 - 25 (1 bit)
access : read-write
RATDDBUSRFECA0DATAVALIDROUTE : DATAVALIDROUTE Protection Bit
bits : 26 - 26 (1 bit)
access : read-write
RATDDBUSRFECA0TRIGGERINROUTE : TRIGGERINROUTE Protection Bit
bits : 27 - 27 (1 bit)
access : read-write
RATDDBUSSYXO0BUFOUTREQINASYNCROUTE : BUFOUTREQINASYNCROUTE Protection Bit
bits : 30 - 30 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x774 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDDBUSTIMER0ROUTEEN : ROUTEEN Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDDBUSTIMER0CC0ROUTE : CC0ROUTE Protection Bit
bits : 1 - 1 (1 bit)
access : read-write
RATDDBUSTIMER0CC1ROUTE : CC1ROUTE Protection Bit
bits : 2 - 2 (1 bit)
access : read-write
RATDDBUSTIMER0CC2ROUTE : CC2ROUTE Protection Bit
bits : 3 - 3 (1 bit)
access : read-write
RATDDBUSTIMER0CCC0ROUTE : CCC0ROUTE Protection Bit
bits : 4 - 4 (1 bit)
access : read-write
RATDDBUSTIMER0CCC1ROUTE : CCC1ROUTE Protection Bit
bits : 5 - 5 (1 bit)
access : read-write
RATDDBUSTIMER0CCC2ROUTE : CCC2ROUTE Protection Bit
bits : 6 - 6 (1 bit)
access : read-write
RATDDBUSTIMER1ROUTEEN : ROUTEEN Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDDBUSTIMER1CC0ROUTE : CC0ROUTE Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDDBUSTIMER1CC1ROUTE : CC1ROUTE Protection Bit
bits : 10 - 10 (1 bit)
access : read-write
RATDDBUSTIMER1CC2ROUTE : CC2ROUTE Protection Bit
bits : 11 - 11 (1 bit)
access : read-write
RATDDBUSTIMER1CCC0ROUTE : CCC0ROUTE Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDDBUSTIMER1CCC1ROUTE : CCC1ROUTE Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDDBUSTIMER1CCC2ROUTE : CCC2ROUTE Protection Bit
bits : 14 - 14 (1 bit)
access : read-write
RATDDBUSTIMER2ROUTEEN : ROUTEEN Protection Bit
bits : 16 - 16 (1 bit)
access : read-write
RATDDBUSTIMER2CC0ROUTE : CC0ROUTE Protection Bit
bits : 17 - 17 (1 bit)
access : read-write
RATDDBUSTIMER2CC1ROUTE : CC1ROUTE Protection Bit
bits : 18 - 18 (1 bit)
access : read-write
RATDDBUSTIMER2CC2ROUTE : CC2ROUTE Protection Bit
bits : 19 - 19 (1 bit)
access : read-write
RATDDBUSTIMER2CCC0ROUTE : CCC0ROUTE Protection Bit
bits : 20 - 20 (1 bit)
access : read-write
RATDDBUSTIMER2CCC1ROUTE : CCC1ROUTE Protection Bit
bits : 21 - 21 (1 bit)
access : read-write
RATDDBUSTIMER2CCC2ROUTE : CCC2ROUTE Protection Bit
bits : 22 - 22 (1 bit)
access : read-write
RATDDBUSTIMER3ROUTEEN : ROUTEEN Protection Bit
bits : 24 - 24 (1 bit)
access : read-write
RATDDBUSTIMER3CC0ROUTE : CC0ROUTE Protection Bit
bits : 25 - 25 (1 bit)
access : read-write
RATDDBUSTIMER3CC1ROUTE : CC1ROUTE Protection Bit
bits : 26 - 26 (1 bit)
access : read-write
RATDDBUSTIMER3CC2ROUTE : CC2ROUTE Protection Bit
bits : 27 - 27 (1 bit)
access : read-write
RATDDBUSTIMER3CCC0ROUTE : CCC0ROUTE Protection Bit
bits : 28 - 28 (1 bit)
access : read-write
RATDDBUSTIMER3CCC1ROUTE : CCC1ROUTE Protection Bit
bits : 29 - 29 (1 bit)
access : read-write
RATDDBUSTIMER3CCC2ROUTE : CCC2ROUTE Protection Bit
bits : 30 - 30 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x778 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDDBUSTIMER4ROUTEEN : ROUTEEN Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDDBUSTIMER4CC0ROUTE : CC0ROUTE Protection Bit
bits : 1 - 1 (1 bit)
access : read-write
RATDDBUSTIMER4CC1ROUTE : CC1ROUTE Protection Bit
bits : 2 - 2 (1 bit)
access : read-write
RATDDBUSTIMER4CC2ROUTE : CC2ROUTE Protection Bit
bits : 3 - 3 (1 bit)
access : read-write
RATDDBUSTIMER4CCC0ROUTE : CCC0ROUTE Protection Bit
bits : 4 - 4 (1 bit)
access : read-write
RATDDBUSTIMER4CCC1ROUTE : CCC1ROUTE Protection Bit
bits : 5 - 5 (1 bit)
access : read-write
RATDDBUSTIMER4CCC2ROUTE : CCC2ROUTE Protection Bit
bits : 6 - 6 (1 bit)
access : read-write
RATDDBUSUSART0ROUTEEN : ROUTEEN Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
RATDDBUSUSART0CSROUTE : CSROUTE Protection Bit
bits : 9 - 9 (1 bit)
access : read-write
RATDDBUSUSART0CTSROUTE : CTSROUTE Protection Bit
bits : 10 - 10 (1 bit)
access : read-write
RATDDBUSUSART0RTSROUTE : RTSROUTE Protection Bit
bits : 11 - 11 (1 bit)
access : read-write
RATDDBUSUSART0RXROUTE : RXROUTE Protection Bit
bits : 12 - 12 (1 bit)
access : read-write
RATDDBUSUSART0SCLKROUTE : SCLKROUTE Protection Bit
bits : 13 - 13 (1 bit)
access : read-write
RATDDBUSUSART0TXROUTE : TXROUTE Protection Bit
bits : 14 - 14 (1 bit)
access : read-write
Port control
address_offset : 0x90 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
mode low
address_offset : 0x94 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE6 : MODE n
bits : 24 - 27 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE7 : MODE n
bits : 28 - 31 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
mode high
address_offset : 0x9C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
data out
address_offset : 0xA0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 9 (10 bit)
access : read-write
data in
address_offset : 0xA4 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 9 (10 bit)
access : read-only
Port control
address_offset : 0xC0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SLEWRATE : Slew Rate
bits : 4 - 6 (3 bit)
access : read-write
DINDIS : Data In Disable
bits : 12 - 12 (1 bit)
access : read-write
SLEWRATEALT : Slew Rate Alt
bits : 20 - 22 (3 bit)
access : read-write
DINDISALT : Data In Disable Alt
bits : 28 - 28 (1 bit)
access : read-write
mode low
address_offset : 0xC4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE0 : MODE n
bits : 0 - 3 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE1 : MODE n
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE2 : MODE n
bits : 8 - 11 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE3 : MODE n
bits : 12 - 15 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE4 : MODE n
bits : 16 - 19 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
MODE5 : MODE n
bits : 20 - 23 (4 bit)
access : read-write
Enumeration:
0 : DISABLED
Input disabled. Pullup if DOUT is set.
1 : INPUT
Input enabled. Filter if DOUT is set.
2 : INPUTPULL
Input enabled. DOUT determines pull direction.
3 : INPUTPULLFILTER
Input enabled with filter. DOUT determines pull direction.
4 : PUSHPULL
Push-pull output.
5 : PUSHPULLALT
Push-pull using alternate control.
6 : WIREDOR
Wired-or output.
7 : WIREDORPULLDOWN
Wired-or output with pull-down.
8 : WIREDAND
Open-drain output.
9 : WIREDANDFILTER
Open-drain output with filter.
10 : WIREDANDPULLUP
Open-drain output with pullup.
11 : WIREDANDPULLUPFILTER
Open-drain output with filter and pullup.
12 : WIREDANDALT
Open-drain output using alternate control.
13 : WIREDANDALTFILTER
Open-drain output using alternate control with filter.
14 : WIREDANDALTPULLUP
Open-drain output using alternate control with pullup.
15 : WIREDANDALTPULLUPFILTER
Open-drain output using alternate control with filter and pullup.
End of enumeration elements list.
data out
address_offset : 0xD0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : Data output
bits : 0 - 5 (6 bit)
access : read-write
data in
address_offset : 0xD4 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
DIN : Data input
bits : 0 - 5 (6 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.