\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
Configure to define the system tick for the M33.
address_offset : 0x1C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TENMS : Ten Milliseconds
bits : 0 - 23 (24 bit)
access : read-write
SKEW : Skew
bits : 24 - 24 (1 bit)
access : read-write
NOREF : No Reference
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
0 : REF
Reference clock is implemented
1 : NOREF
Reference clock is not implemented
End of enumeration elements list.
Generic data space for user to pass to root, e.g., address of struct in mem
address_offset : 0x600 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : Data
bits : 0 - 31 (32 bit)
access : read-write
Generic data space for user to pass to root, e.g., address of struct in mem
address_offset : 0x604 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : Data
bits : 0 - 31 (32 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x608 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDCFGNSTCALIB : CFGNSTCALIB Protection Bit
bits : 7 - 7 (1 bit)
access : read-write
RATDCFGNSSYSTIC : CFGNSSYSTIC Protection Bit
bits : 8 - 8 (1 bit)
access : read-write
Protected register address = (RPURATD register index X 32 + RPURATD bit index) X 4.
address_offset : 0x638 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RATDROOTNSDATA0 : DATA0 Protection Bit
bits : 0 - 0 (1 bit)
access : read-write
RATDROOTNSDATA1 : DATA1 Protection Bit
bits : 1 - 1 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.