\n
address_offset : 0x0 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x100 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
POEG Group A Setting Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PIDF : Port Input Detection Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from the GTETRGn pin occurred
#1 : 1
Output-disable request from the GTETRGn pin occurred.
End of enumeration elements list.
IOCF : Detection Flag for GPT Output-Disable Request
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from GPT occurred.
#1 : 1
Output-disable request from GPT occurred.
End of enumeration elements list.
OSTPF : Oscillation Stop Detection Flag
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from oscillation stop detection occurred
#1 : 1
Output-disable request from oscillation stop detection occurred
End of enumeration elements list.
SSF : Software Stop Flag
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from software occurred
#1 : 1
Output-disable request from software occurred
End of enumeration elements list.
PIDE : Port Input Detection Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable output-disable requests from the GTETRGn pins
#1 : 1
Enable output-disable requests from the GTETRGn pins
End of enumeration elements list.
IOCE : Enable for GPT Output-Disable Request
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable output-disable requests from GPT
#1 : 1
Enable output-disable requests from GPT
End of enumeration elements list.
OSTPE : Oscillation Stop Detection Enable
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable output-disable requests from oscillation stop detection
#1 : 1
Enable output-disable requests from oscillation stop detection
End of enumeration elements list.
ST : GTETRGn Input Status Flag
bits : 16 - 15 (0 bit)
access : read-only
Enumeration:
#0 : 0
GTETRGn input after filtering was 0
#1 : 1
GTETRGn input after filtering was 1
End of enumeration elements list.
INV : GTETRGn Input Reverse
bits : 28 - 27 (0 bit)
access : read-write
Enumeration:
#0 : 0
Input GTETRGn as-is
#1 : 1
Input GTETRGn in reverse
End of enumeration elements list.
NFEN : Noise Filter Enable
bits : 29 - 28 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable noise filtering
#1 : 1
Enable noise filtering
End of enumeration elements list.
NFCS : Noise Filter Clock Select
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#00 : 00
Sample GTETRGn pin input level three times every PCLKB
#01 : 01
Sample GTETRGn pin input level three times every PCLKB/8
#10 : 10
Sample GTETRGn pin input level three times every PCLKB/32
#11 : 11
Sample GTETRGn pin input level three times every PCLKB/128
End of enumeration elements list.
POEG Group B Setting Register
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PIDF : Port Input Detection Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from the GTETRGn pin occurred
#1 : 1
Output-disable request from the GTETRGn pin occurred.
End of enumeration elements list.
IOCF : Detection Flag for GPT Output-Disable Request
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from GPT occurred.
#1 : 1
Output-disable request from GPT occurred.
End of enumeration elements list.
OSTPF : Oscillation Stop Detection Flag
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from oscillation stop detection occurred
#1 : 1
Output-disable request from oscillation stop detection occurred
End of enumeration elements list.
SSF : Software Stop Flag
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
No output-disable request from software occurred
#1 : 1
Output-disable request from software occurred
End of enumeration elements list.
PIDE : Port Input Detection Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable output-disable requests from the GTETRGn pins
#1 : 1
Enable output-disable requests from the GTETRGn pins
End of enumeration elements list.
IOCE : Enable for GPT Output-Disable Request
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable output-disable requests from GPT
#1 : 1
Enable output-disable requests from GPT
End of enumeration elements list.
OSTPE : Oscillation Stop Detection Enable
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable output-disable requests from oscillation stop detection
#1 : 1
Enable output-disable requests from oscillation stop detection
End of enumeration elements list.
ST : GTETRGn Input Status Flag
bits : 16 - 15 (0 bit)
access : read-only
Enumeration:
#0 : 0
GTETRGn input after filtering was 0
#1 : 1
GTETRGn input after filtering was 1
End of enumeration elements list.
INV : GTETRGn Input Reverse
bits : 28 - 27 (0 bit)
access : read-write
Enumeration:
#0 : 0
Input GTETRGn as-is
#1 : 1
Input GTETRGn in reverse
End of enumeration elements list.
NFEN : Noise Filter Enable
bits : 29 - 28 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable noise filtering
#1 : 1
Enable noise filtering
End of enumeration elements list.
NFCS : Noise Filter Clock Select
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#00 : 00
Sample GTETRGn pin input level three times every PCLKB
#01 : 01
Sample GTETRGn pin input level three times every PCLKB/8
#10 : 10
Sample GTETRGn pin input level three times every PCLKB/32
#11 : 11
Sample GTETRGn pin input level three times every PCLKB/128
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.