\n
address_offset : 0x0 Bytes (0x0)
size : 0xE byte (0x0)
mem_usage : registers
protection : not protected
Module Stop Control Register B
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSTPB9 : I2C Bus Interface 0 Module Stop
bits : 9 - 8 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPB19 : Serial Peripheral Interface 0 Module Stop
bits : 19 - 18 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPB22 : Serial Communication Interface 9 Module Stop
bits : 22 - 21 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPB29 : Serial Communication Interface 2 Module Stop
bits : 29 - 28 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPB30 : Serial Communication Interface 1 Module Stop
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPB31 : Serial Communication Interface 0 Module Stop
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
Module Stop Control Register C
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSTPC0 : Clock Frequency Accuracy Measurement Circuit Module Stop
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPC1 : Cyclic Redundancy Check Calculator Module Stop
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPC3 : Capacitive Touch Sensing Unit Module Stop
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPC13 : Data Operation Circuit Module Stop
bits : 13 - 12 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPC14 : Event Link Controller Module Stop
bits : 14 - 13 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPC28 : Random Number Generator Module Stop
bits : 28 - 27 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPC31 : AES Module Stop
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
Module Stop Control Register D
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSTPD2 : Low Power Asynchronous General Purpose Timer 1 Module Stop
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPD3 : Low Power Asynchronous General Purpose Timer 0 Module Stop
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPD5 : General PWM Timer 32n Module Stop
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPD6 : General PWM Timer 164 to 169 and PWM Delay Generation Circuit Module Stop
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPD14 : Port Output Enable for GPT Module Stop
bits : 14 - 13 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPD16 : 12-bit A/D Converter Module Stop
bits : 16 - 15 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
MSTPD29 : Low-Power Analog Comparator Module Stop
bits : 29 - 28 (0 bit)
access : read-write
Enumeration:
#0 : 0
Cancel the module-stop state
#1 : 1
Enter the module-stop state
End of enumeration elements list.
Low Speed Module R/W Disable Control Register
address_offset : 0xC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTCRWDIS : RTC Register R/W Enable Control
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
RTC register R/W clock always on
#1 : 1
RTC register R/W clock stops
End of enumeration elements list.
WDTDIS : WDT Operate Clock Control
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
WDT operates as normal
#1 : 1
Stop the WDT clock and register R/W clock
End of enumeration elements list.
IWDTIDS : IWDT Register Clock Control
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
IWDT operates as normal
#1 : 1
Stop the IWDT register R/W clock
End of enumeration elements list.
WREN : Write Enable for bits [2:0]
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Write protect for bits [2:0]
#1 : 1
Write enable for bits [2:0]
End of enumeration elements list.
PRKEY : LSMRWDIS Key Code
bits : 8 - 14 (7 bit)
access : write-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.