Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x3 byte (0x0)
mem_usage : registers
protection : not protected
ACMPLP Mode Setting Register
address_offset : 0x0 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
C0ENB : ACMPLP0 Operation Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable comparator channel ACMPLP0
#1 : 1
Enable comparator channel ACMPLP0
End of enumeration elements list.
C0WDE : ACMPLP0 Window Function Mode Enable
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable window function for ACMPLP0
#1 : 1
Enable window function for ACMPLP0
End of enumeration elements list.
C0VRF : ACMPLP0 Reference Voltage Selection
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Select CMPREF0 input as ACMPLP0 reference voltage.
#1 : 1
Select internal reference voltage (Vref) as ACMPLP0 reference voltage.
End of enumeration elements list.
C0MON : ACMPLP0 Monitor Flag
bits : 3 - 2 (0 bit)
access : read-only
C1ENB : ACMPLP1 Operation Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable ACMPLP1 operation
#1 : 1
Enable ACMPLP1 operation
End of enumeration elements list.
C1WDE : ACMPLP1 Window Function Mode Enable
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disable ACMPLP1 window function mode
#1 : 1
Enable ACMPLP1 window function mode
End of enumeration elements list.
C1VRF : ACMPLP1 Reference Voltage Selection
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Select CMPREF1 input as ACMPLP1 reference voltage.
#1 : 1
Select internal reference voltage (Vref) as ACMPLP1 reference voltage.
End of enumeration elements list.
C1MON : ACMPLP1 Monitor Flag
bits : 7 - 6 (0 bit)
access : read-only
ACMPLP Filter Control Register
address_offset : 0x1 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
C0FCK : ACMPLP0 Filter Select
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#00 : 00
No Sampling (bypass)
#01 : 01
Sampling at PCLKB
#10 : 10
Sampling at PCLKB/8
#11 : 11
Sampling at PCLKB/32
End of enumeration elements list.
C0EPO : ACMPLP0 Edge Polarity Switching
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt and ELC event request on rising edge
#1 : 1
Interrupt and ELC event request on falling edge
End of enumeration elements list.
C0EDG : ACMPLP0 Edge Detection Selection
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt and ELC event request by one-edge detection
#1 : 1
Interrupt and ELC event request by both-edge detection
End of enumeration elements list.
C1FCK : ACMPLP1 Filter Select
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#00 : 00
No Sampling (bypass)
#01 : 01
Sampling at PCLKB
#10 : 10
Sampling at PCLKB/8
#11 : 11
Sampling at PCLKB/32
End of enumeration elements list.
C1EPO : ACMPLP1 Edge Polarity Switching
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt and ELC event request on rising edge
#1 : 1
Interrupt and ELC event request on falling edge
End of enumeration elements list.
C1EDG : ACMPLP1 Edge Detection Selection
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt and ELC event request by one-edge detection
#1 : 1
Interrupt and ELC event request by both-edge detection
End of enumeration elements list.
ACMPLP Output Control Register
address_offset : 0x2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
C0OE : ACMPLP0 VCOUT Pin Output Enable
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disabled
#1 : 1
Enabled
End of enumeration elements list.
C0OP : ACMPLP0 VCOUT Output Polarity Selection
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Non-inverted
#1 : 1
Inverted
End of enumeration elements list.
C1OE : ACMPLP1 VCOUT Pin Output Enable
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Disabled
#1 : 1
Enabled
End of enumeration elements list.
C1OP : ACMPLP1 VCOUT Output Polarity Selection
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Non-inverted
#1 : 1
Inverted
End of enumeration elements list.
SPDMD : ACMPLP0/ACMPLP1 Speed Selection
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Low-speed mode
#1 : 1
High-speed mode
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.