Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x2000 byte (0x0)
mem_usage : registers
protection :
Offset:0x00 AHB Clock Enable Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0CLKEN : Enable AHB clock for P0
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
P1CLKEN : Enable AHB clock for P1
bits : 1 - 2 (2 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
P2CLKEN : Enable AHB clock for P2
bits : 2 - 4 (3 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
P3CLKEN : Enable AHB clock for P3
bits : 3 - 6 (4 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
USBCLKEN : Enable AHB clock for USB
bits : 4 - 8 (5 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
CT16B0CLKEN : Enable AHB clock for CT16B0
bits : 6 - 12 (7 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
CT16B1CLKEN : Enable AHB clock for CT16B1
bits : 7 - 14 (8 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
ADCCLKEN : Enable AHB clock for ADC
bits : 11 - 22 (12 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
SPI0CLKEN : Enable AHB clock for SPI0
bits : 12 - 24 (13 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
UART0CLKEN : Enable AHB clock for UART0
bits : 16 - 32 (17 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
UART1CLKEN : Enable AHB clock for UART1
bits : 17 - 34 (18 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
UART2CLKEN : Enable AHB clock for UART2
bits : 18 - 36 (19 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
I2C0CLKEN : Enable AHB clock for I2C0
bits : 21 - 42 (22 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
WDTCLKEN : Enable AHB clock for WDT
bits : 24 - 48 (25 bit)
access : read-write
Enumeration:
0 : Disable
Disable
1 : Enable
Enable
End of enumeration elements list.
CLKOUTSEL : Clock output source selection
bits : 28 - 58 (31 bit)
access : read-write
Enumeration:
0 : 000
Disable
1 : 001
ILRC
4 : 100
HCLK
5 : 101
IHRC
End of enumeration elements list.
Offset:0x08 APB Clock Prescale Register 1
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WDTPRE : WDT APB clock source prescaler
bits : 20 - 42 (23 bit)
access : read-write
Enumeration:
0 : 000
WDT_PCLK = WDT clock source/1
1 : 001
WDT_PCLK = WDT clock source/2
2 : 010
WDT_PCLK = WDT clock source/4
3 : 011
WDT_PCLK = WDT clock source/8
4 : 100
WDT_PCLK = WDT clock source/16
5 : 101
WDT_PCLK = WDT clock source/32
End of enumeration elements list.
CLKOUTPRE : CLKOUT APB clock source prescaler
bits : 28 - 58 (31 bit)
access : read-write
Enumeration:
0 : 000
FCLKOUT/1
1 : 001
FCLKOUT/2
2 : 010
FCLKOUT/4
3 : 011
FCLKOUT/8
4 : 100
FCLKOUT/16
5 : 101
FCLKOUT/32
6 : 110
FCLKOUT/64
7 : 111
FCLKOUT/128
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.