\n
address_offset : 0x0 Bytes (0x0)
size : 0x20 byte (0x0)
mem_usage : registers
protection :
SPI Config Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SPR0 : Enable SysTick Timer
bits : 0 - 0 (1 bit)
access : read-write
SPR1 : Generate Tick Interrupt
bits : 1 - 1 (1 bit)
access : read-write
CPHA : Generate Tick Interrupt
bits : 2 - 2 (1 bit)
access : read-write
CPOL : Source to count from
bits : 3 - 3 (1 bit)
access : read-write
MSTR : SysTick counted to zero
bits : 4 - 4 (1 bit)
access : read-write
SPEN : SysTick counted to zero
bits : 6 - 6 (1 bit)
access : read-write
SPR2 : SysTick counted to zero
bits : 7 - 7 (1 bit)
access : read-write
SPI CHIP SELECT CONFIG
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SSN : Value to auto reload SysTick after reaching zero
bits : 0 - 0 (1 bit)
access : read-write
SPI Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MDF : Current value
bits : 4 - 4 (1 bit)
access : read-only
SSERR : Current value
bits : 5 - 5 (1 bit)
access : read-only
WCOL : Current value
bits : 6 - 6 (1 bit)
access : read-only
SPIF : Current value
bits : 7 - 7 (1 bit)
access : read-only
I2C Data register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SPDATA : Reload value to use for 10ms timing
bits : 0 - 7 (8 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.