\n
address_offset : 0x0 Bytes (0x0)
size : 0x14 byte (0x0)
mem_usage : registers
protection :
RTC Status and Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTCO : RTC Counter Output Enable
bits : 4 - 4 (1 bit)
access : read-write
RTIE : RTC Interrupt Enable
bits : 6 - 6 (1 bit)
access : read-write
RTIF : RTC Interrupt Flag
bits : 7 - 7 (1 bit)
access : read-write
RTCLKS : RTC Clock Source Select
bits : 14 - 15 (2 bit)
access : read-write
Enumeration:
#00 : 00
Bus Clock
#01 : 01
Interval 32KHz
#10 : 10
External XOSC
#11 : 11
External Pin In
End of enumeration elements list.
RPIE : RTC Prescaler Interrupt Enable
bits : 16 - 16 (1 bit)
access : read-write
RPIF : RTC Prescaler Interrupt Flag
bits : 17 - 17 (1 bit)
access : read-write
RTC Prescaler Counter Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PSCNT : Prescaler Counter Register
bits : 0 - 19 (20 bit)
access : read-only
RTC Modulo Value
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MOD : Modulo Value
bits : 0 - 31 (32 bit)
access : read-write
RTC Count Value
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
CNT : Count Value
bits : 0 - 31 (32 bit)
access : read-only
RTC Prescaler Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTCPS : Prescale Value
bits : 0 - 19 (20 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.