\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection :
HLVDCR
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
HLVDS : High / Low Voltage Detector Level Bits
bits : 0 - 1 (2 bit)
access : read-write
VDM : Voltage Direction Magnitude Select bit
bits : 4 - 8 (5 bit)
access : read-write
VDSB : Voltage Detector State Bit. This is a read only bit.
bits : 5 - 10 (6 bit)
access : read-write
IRVSF : Internal Reference Voltage Stable Flag bit
bits : 6 - 12 (7 bit)
access : read-write
HLVDEN : High / Low Voltage Detector Enable Bit
bits : 7 - 14 (8 bit)
access : read-write
HLVDSF : Low Voltage Detector status flag
bits : 8 - 16 (9 bit)
access : read-write
LVDWK : Low Voltage Detect Wake-up Enable Bit
bits : 9 - 18 (10 bit)
access : read-write
LVRCR
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LVR : Low voltage Level Bits.
bits : 0 - 1 (2 bit)
access : read-write
LVREN : LVR Enable bit
bits : 7 - 14 (8 bit)
access : read-write
V18_KEY
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
V18_KEY : Enable write access to V18CR register by writing 0x50AF
bits : 0 - 15 (16 bit)
access : read-write
V18CR
address_offset : 0xC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
V18PMS : 1.8V Regulator power mode section bit
bits : 0 - 0 (1 bit)
access : read-write
V18PD : 1.8V Regulator power down control bit
bits : 1 - 2 (2 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.