TIMER0

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x4C byte (0x0)
mem_usage : registers
protection :

Registers

TIMEHW

ALARM0

ALARM1

ALARM2

ALARM3

ARMED

TIMERAWH

TIMERAWL

DBGPAUSE

PAUSE

LOCKED

SOURCE

INTR

TIMELW

INTE

INTF

INTS

TIMEHR

TIMELR


TIMEHW

Write to bits 63:32 of time always write timelw before timehw
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TIMEHW TIMEHW read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIMEHW

TIMEHW :
bits : 0 - 31 (32 bit)
access : write-only


ALARM0

Arm alarm 0, and configure the time it will fire. Once armed, the alarm fires when TIMER_ALARM0 == TIMELR. The alarm will disarm itself once it fires, and can be disarmed early using the ARMED status register.
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ALARM0 ALARM0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM0

ALARM0 :
bits : 0 - 31 (32 bit)
access : read-write


ALARM1

Arm alarm 1, and configure the time it will fire. Once armed, the alarm fires when TIMER_ALARM1 == TIMELR. The alarm will disarm itself once it fires, and can be disarmed early using the ARMED status register.
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ALARM1 ALARM1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM1

ALARM1 :
bits : 0 - 31 (32 bit)
access : read-write


ALARM2

Arm alarm 2, and configure the time it will fire. Once armed, the alarm fires when TIMER_ALARM2 == TIMELR. The alarm will disarm itself once it fires, and can be disarmed early using the ARMED status register.
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ALARM2 ALARM2 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM2

ALARM2 :
bits : 0 - 31 (32 bit)
access : read-write


ALARM3

Arm alarm 3, and configure the time it will fire. Once armed, the alarm fires when TIMER_ALARM3 == TIMELR. The alarm will disarm itself once it fires, and can be disarmed early using the ARMED status register.
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ALARM3 ALARM3 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM3

ALARM3 :
bits : 0 - 31 (32 bit)
access : read-write


ARMED

Indicates the armed/disarmed status of each alarm. A write to the corresponding ALARMx register arms the alarm. Alarms automatically disarm upon firing, but writing ones here will disarm immediately without waiting to fire.
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ARMED ARMED read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ARMED

ARMED :
bits : 0 - 3 (4 bit)
access : read-write


TIMERAWH

Raw read from bits 63:32 of time (no side effects)
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TIMERAWH TIMERAWH read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIMERAWH

TIMERAWH :
bits : 0 - 31 (32 bit)
access : read-only


TIMERAWL

Raw read from bits 31:0 of time (no side effects)
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TIMERAWL TIMERAWL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIMERAWL

TIMERAWL :
bits : 0 - 31 (32 bit)
access : read-only


DBGPAUSE

Set bits high to enable pause when the corresponding debug ports are active
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

DBGPAUSE DBGPAUSE read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DBG0 DBG1

DBG0 : Pause when processor 0 is in debug mode
bits : 1 - 1 (1 bit)
access : read-write

DBG1 : Pause when processor 1 is in debug mode
bits : 2 - 2 (1 bit)
access : read-write


PAUSE

Set high to pause the timer
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

PAUSE PAUSE read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PAUSE

PAUSE :
bits : 0 - 0 (1 bit)
access : read-write


LOCKED

Set locked bit to disable write access to timer Once set, cannot be cleared (without a reset)
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

LOCKED LOCKED read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 LOCKED

LOCKED :
bits : 0 - 0 (1 bit)
access : read-write


SOURCE

Selects the source for the timer. Defaults to the normal tick configured in the ticks block (typically configured to 1 microsecond). Writing to 1 will ignore the tick and count clk_sys cycles instead.
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SOURCE SOURCE read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CLK_SYS

CLK_SYS :
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

0 : TICK


1 : CLK_SYS


End of enumeration elements list.


INTR

Raw Interrupts
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

INTR INTR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM_0 ALARM_1 ALARM_2 ALARM_3

ALARM_0 :
bits : 0 - 0 (1 bit)
access : read-write

ALARM_1 :
bits : 1 - 1 (1 bit)
access : read-write

ALARM_2 :
bits : 2 - 2 (1 bit)
access : read-write

ALARM_3 :
bits : 3 - 3 (1 bit)
access : read-write


TIMELW

Write to bits 31:0 of time writes do not get copied to time until timehw is written
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TIMELW TIMELW read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIMELW

TIMELW :
bits : 0 - 31 (32 bit)
access : write-only


INTE

Interrupt Enable
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

INTE INTE read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM_0 ALARM_1 ALARM_2 ALARM_3

ALARM_0 :
bits : 0 - 0 (1 bit)
access : read-write

ALARM_1 :
bits : 1 - 1 (1 bit)
access : read-write

ALARM_2 :
bits : 2 - 2 (1 bit)
access : read-write

ALARM_3 :
bits : 3 - 3 (1 bit)
access : read-write


INTF

Interrupt Force
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

INTF INTF read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM_0 ALARM_1 ALARM_2 ALARM_3

ALARM_0 :
bits : 0 - 0 (1 bit)
access : read-write

ALARM_1 :
bits : 1 - 1 (1 bit)
access : read-write

ALARM_2 :
bits : 2 - 2 (1 bit)
access : read-write

ALARM_3 :
bits : 3 - 3 (1 bit)
access : read-write


INTS

Interrupt status after masking & forcing
address_offset : 0x48 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

INTS INTS read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALARM_0 ALARM_1 ALARM_2 ALARM_3

ALARM_0 :
bits : 0 - 0 (1 bit)
access : read-only

ALARM_1 :
bits : 1 - 1 (1 bit)
access : read-only

ALARM_2 :
bits : 2 - 2 (1 bit)
access : read-only

ALARM_3 :
bits : 3 - 3 (1 bit)
access : read-only


TIMEHR

Read from bits 63:32 of time always read timelr before timehr
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TIMEHR TIMEHR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIMEHR

TIMEHR :
bits : 0 - 31 (32 bit)
access : read-only


TIMELR

Read from bits 31:0 of time
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

TIMELR TIMELR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIMELR

TIMELR :
bits : 0 - 31 (32 bit)
access : read-only



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.