\n

INTREQ

Peripheral Memory Blocks

address_offset : 0x10 Bytes (0x0)
size : 0x94 byte (0x0)
mem_usage : registers
protection : not protected

Registers

EXC02MON

IRQ00MON

IRQ01MON

IRQ02MON

IRQ03MON

IRQ04MON

IRQ05MON

IRQ06MON

IRQ07MON

IRQ08MON

IRQ09MON

IRQ10MON

IRQ11MON

IRQ12MON

IRQ13MON

IRQ14MON

IRQ15MON

IRQ16MON

IRQ17MON

IRQ18MON

IRQ19MON

IRQ20MON

IRQ21MON

IRQ22MON

IRQ23MON

IRQ24MON

IRQ25MON

IRQ26MON

IRQ27MON

IRQ28MON

IRQ30MON

IRQ31MON


EXC02MON

EXC02 batch read register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

EXC02MON EXC02MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NMI HWINT

NMI : External NMIX pin interrupt request
bits : 0 - -1 (0 bit)
access : read-only

HWINT : Hardware watchdog timer interrupt request
bits : 1 - 0 (0 bit)
access : read-only


IRQ00MON

IRQ00 Batch Read Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ00MON IRQ00MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FCSINT

FCSINT : Anomalous frequency detection by CSV interrupt request
bits : 0 - -1 (0 bit)
access : read-only


IRQ01MON

IRQ01 Batch Read Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ01MON IRQ01MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SWWDTINT

SWWDTINT : Software watchdog timer interrupt request
bits : 0 - -1 (0 bit)
access : read-only


IRQ02MON

IRQ02 Batch Read Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ02MON IRQ02MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 LVDINT

LVDINT : Low voltage detection (LVD) interrupt request
bits : 0 - -1 (0 bit)
access : read-only


IRQ03MON

IRQ03 Batch Read Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ03MON IRQ03MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 WAVE0INT0 WAVE0INT1 WAVE0INT2 WAVE0INT3

WAVE0INT0 : DTIF (motor emergency stop) interrupt request in MFT unit 0
bits : 0 - -1 (0 bit)
access : read-only

WAVE0INT1 : WFG timer 10 interrupt request in MFT unit 0
bits : 1 - 0 (0 bit)
access : read-only

WAVE0INT2 : WFG timer 32 interrupt request in MFT unit 0
bits : 2 - 1 (0 bit)
access : read-only

WAVE0INT3 : WFG timer 54 interrupt request in MFT unit 0
bits : 3 - 2 (0 bit)
access : read-only


IRQ04MON

IRQ04 Batch Read Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ04MON IRQ04MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 EXTINT0 EXTINT1 EXTINT2 EXTINT3 EXTINT4 EXTINT5 EXTINT6 EXTINT7

EXTINT0 : Interrupt request on external interrupt ch.0
bits : 0 - -1 (0 bit)
access : read-only

EXTINT1 : Interrupt request on external interrupt ch.1
bits : 1 - 0 (0 bit)
access : read-only

EXTINT2 : Interrupt request on external interrupt ch.2
bits : 2 - 1 (0 bit)
access : read-only

EXTINT3 : Interrupt request on external interrupt ch.3
bits : 3 - 2 (0 bit)
access : read-only

EXTINT4 : Interrupt request on external interrupt ch.4
bits : 4 - 3 (0 bit)
access : read-only

EXTINT5 : Interrupt request on external interrupt ch.5
bits : 5 - 4 (0 bit)
access : read-only

EXTINT6 : Interrupt request on external interrupt ch.6
bits : 6 - 5 (0 bit)
access : read-only

EXTINT7 : Interrupt request on external interrupt ch.7
bits : 7 - 6 (0 bit)
access : read-only


IRQ05MON

IRQ05 Batch Read Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ05MON IRQ05MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 EXTINT8 EXTINT9 EXTINT10 EXTINT11 EXTINT12 EXTINT13 EXTINT14 EXTINT15

EXTINT8 : Interrupt request on external interrupt ch.8
bits : 0 - -1 (0 bit)
access : read-only

EXTINT9 : Interrupt request on external interrupt ch.9
bits : 1 - 0 (0 bit)
access : read-only

EXTINT10 : Interrupt request on external interrupt ch.10
bits : 2 - 1 (0 bit)
access : read-only

EXTINT11 : Interrupt request on external interrupt ch.11
bits : 3 - 2 (0 bit)
access : read-only

EXTINT12 : Interrupt request on external interrupt ch.12
bits : 4 - 3 (0 bit)
access : read-only

EXTINT13 : Interrupt request on external interrupt ch.13
bits : 5 - 4 (0 bit)
access : read-only

EXTINT14 : Interrupt request on external interrupt ch.14
bits : 6 - 5 (0 bit)
access : read-only

EXTINT15 : Interrupt request on external interrupt ch.15
bits : 7 - 6 (0 bit)
access : read-only


IRQ06MON

IRQ06 Batch Read Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ06MON IRQ06MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.0
bits : 0 - -1 (0 bit)
access : read-only


IRQ07MON

IRQ07 Batch Read Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ07MON IRQ07MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.0
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.0
bits : 1 - 0 (0 bit)
access : read-only


IRQ08MON

IRQ08 Batch Read Register
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ08MON IRQ08MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.1
bits : 0 - -1 (0 bit)
access : read-only


IRQ09MON

IRQ9 Batch Read Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ09MON IRQ09MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.1
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.1
bits : 1 - 0 (0 bit)
access : read-only


IRQ10MON

IRQ10 Batch Read Register
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ10MON IRQ10MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.2
bits : 0 - -1 (0 bit)
access : read-only


IRQ11MON

IRQ11 Batch Read Register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ11MON IRQ11MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.2
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.2
bits : 1 - 0 (0 bit)
access : read-only


IRQ12MON

IRQ12 Batch Read Register
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ12MON IRQ12MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.3
bits : 0 - -1 (0 bit)
access : read-only


IRQ13MON

IRQ13 Batch Read Register
address_offset : 0x48 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ13MON IRQ13MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.3
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.3
bits : 1 - 0 (0 bit)
access : read-only


IRQ14MON

IRQ14 Batch Read Register
address_offset : 0x4C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ14MON IRQ14MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.4
bits : 0 - -1 (0 bit)
access : read-only


IRQ15MON

IRQ15 Batch Read Register
address_offset : 0x50 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ15MON IRQ15MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.4
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.4
bits : 1 - 0 (0 bit)
access : read-only


IRQ16MON

IRQ16 Batch Read Register
address_offset : 0x54 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ16MON IRQ16MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.5
bits : 0 - -1 (0 bit)
access : read-only


IRQ17MON

IRQ17 Batch Read Register
address_offset : 0x58 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ17MON IRQ17MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.5
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.5
bits : 1 - 0 (0 bit)
access : read-only


IRQ18MON

IRQ18 Batch Read Register
address_offset : 0x5C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ18MON IRQ18MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.6
bits : 0 - -1 (0 bit)
access : read-only


IRQ19MON

IRQ19 Batch Read Register
address_offset : 0x60 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ19MON IRQ19MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.6
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.6
bits : 1 - 0 (0 bit)
access : read-only


IRQ20MON

IRQ20 Batch Read Register
address_offset : 0x64 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ20MON IRQ20MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT

MFSINT : Reception interrupt request on MFS ch.7
bits : 0 - -1 (0 bit)
access : read-only


IRQ21MON

IRQ21 Batch Read Register
address_offset : 0x68 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ21MON IRQ21MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MFSINT0 MFSINT1

MFSINT0 : Transmission interrupt request on MFS ch.7
bits : 0 - -1 (0 bit)
access : read-only

MFSINT1 : Status interrupt request on MFS ch.7
bits : 1 - 0 (0 bit)
access : read-only


IRQ22MON

IRQ22 Batch Read Register
address_offset : 0x6C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ22MON IRQ22MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PPGINT0 PPGINT1 PPGINT2

PPGINT0 : Interrupt request on PPG ch.0
bits : 0 - -1 (0 bit)
access : read-only

PPGINT1 : Interrupt request on PPG ch.2
bits : 1 - 0 (0 bit)
access : read-only

PPGINT2 : Interrupt request on PPG ch.4
bits : 2 - 1 (0 bit)
access : read-only


IRQ23MON

IRQ23 Batch Read Register
address_offset : 0x70 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ23MON IRQ23MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MOSCINT SOSCINT MPLLINT RTCINT

MOSCINT : Stabilization wait completion interrupt request for main clock oscillation
bits : 0 - -1 (0 bit)
access : read-only

SOSCINT : Stabilization wait completion interrupt request for sub-clock oscillation
bits : 1 - 0 (0 bit)
access : read-only

MPLLINT : Stabilization wait completion interrupt request for main PLL oscillation
bits : 2 - 1 (0 bit)
access : read-only

RTCINT : RTC interrupt request
bits : 5 - 4 (0 bit)
access : read-only


IRQ24MON

IRQ24 Batch Read Register
address_offset : 0x74 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ24MON IRQ24MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ADCINT0 ADCINT1 ADCINT2 ADCINT3

ADCINT0 : Priority conversion interrupt request in the corresponding A/D unit 0.
bits : 0 - -1 (0 bit)
access : read-only

ADCINT1 : Scan conversion interrupt request in the corresponding A/D unit 0.
bits : 1 - 0 (0 bit)
access : read-only

ADCINT2 : FIFO overrun interrupt request in the corresponding A/D unit 0.
bits : 2 - 1 (0 bit)
access : read-only

ADCINT3 : Conversion result comparison interrupt request in the corresponding A/D unit 0.
bits : 3 - 2 (0 bit)
access : read-only


IRQ25MON

IRQ25 Batch Read Register
address_offset : 0x78 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ25MON IRQ25MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FRT0INT0 FRT0INT1 FRT0INT2 FRT0INT3 FRT0INT4 FRT0INT5

FRT0INT0 : Peak value detection interrupt request on the free run timer ch.0 in the MFT unit 0
bits : 0 - -1 (0 bit)
access : read-only

FRT0INT1 : Peak value detection interrupt request on the free run timer ch.1 in the MFT unit 0
bits : 1 - 0 (0 bit)
access : read-only

FRT0INT2 : Peak value detection interrupt request on the free run timer ch.2 in the MFT unit 0
bits : 2 - 1 (0 bit)
access : read-only

FRT0INT3 : Zero detection interrupt request on the free run timer ch.0 in the MFT unit 0
bits : 3 - 2 (0 bit)
access : read-only

FRT0INT4 : Zero detection interrupt request on the free run timer ch.1 in the MFT unit 0
bits : 4 - 3 (0 bit)
access : read-only

FRT0INT5 : Zero detection interrupt request on the free run timer ch.2 in the MFT unit 0
bits : 5 - 4 (0 bit)
access : read-only


IRQ26MON

IRQ26 Batch Read Register
address_offset : 0x7C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ26MON IRQ26MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ICU0INT0 ICU0INT1 ICU0INT2 ICU0INT3

ICU0INT0 : Interrupt request on the input capture ch.0 in the MFT unit 0
bits : 0 - -1 (0 bit)
access : read-only

ICU0INT1 : Interrupt request on the input capture ch.1 in the MFT unit 0
bits : 1 - 0 (0 bit)
access : read-only

ICU0INT2 : Interrupt request on the input capture ch.2 in the MFT unit 0
bits : 2 - 1 (0 bit)
access : read-only

ICU0INT3 : Interrupt request on the input capture ch.3 in the MFT unit 0
bits : 3 - 2 (0 bit)
access : read-only


IRQ27MON

IRQ27 Batch Read Register
address_offset : 0x80 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IRQ27MON IRQ27MON read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 OCU0INT0 OCU0INT1 OCU0INT2 OCU0INT3 OCU0INT4 OCU0INT5

OCU0INT0 : Interrupt request on the output compare ch.0 in the MFT unit 0
bits : 0 - -1 (0 bit)
access : read-only

OCU0INT1 : Interrupt request on the output compare ch.1 in the MFT unit 0
bits : 1 - 0 (0 bit)
access : read-only

OCU0INT2 : Interrupt request on the output compare ch.2 in the MFT unit 0
bits : 2 - 1 (0 bit)
access : read-only

OCU0INT3 : Interrupt request on the output compare ch.3 in the MFT unit 0
bits : 3 - 2 (0 bit)
access : read-only

OCU0INT4 : Interrupt request on the output compare ch.4 in the MFT unit 0
bits : 4 - 3 (0 bit)
access : read-only

OCU0INT5 : Interrupt request on the output compare ch.5 in the MFT unit 0
bits : 5 - 4 (0 bit)
access : read-only


IRQ28MON

IRQ28 Batch Read Register
address_offset : 0x84 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IRQ28MON IRQ28MON read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BTINT0 BTINT1 BTINT2 BTINT3 BTINT4 BTINT5 BTINT6 BTINT7 BTINT8 BTINT9 BTINT10 BTINT11 BTINT12 BTINT13 BTINT14 BTINT15

BTINT0 : IRQ0 interrupt request on the base timer ch.0
bits : 0 - -1 (0 bit)
access : read-only

BTINT1 : IRQ1 interrupt request on the base timer ch.0
bits : 1 - 0 (0 bit)
access : read-only

BTINT2 : IRQ0 interrupt request on the base timer ch.1
bits : 2 - 1 (0 bit)
access : read-only

BTINT3 : IRQ1 interrupt request on the base timer ch.1
bits : 3 - 2 (0 bit)
access : read-only

BTINT4 : IRQ0 interrupt request on the base timer ch.2
bits : 4 - 3 (0 bit)
access : read-only

BTINT5 : IRQ1 interrupt request on the base timer ch.2
bits : 5 - 4 (0 bit)
access : read-only

BTINT6 : IRQ0 interrupt request on the base timer ch.3
bits : 6 - 5 (0 bit)
access : read-only

BTINT7 : IRQ1 interrupt request on the base timer ch.3
bits : 7 - 6 (0 bit)
access : read-only

BTINT8 : IRQ0 interrupt request on the base timer ch.4
bits : 8 - 7 (0 bit)
access : read-only

BTINT9 : IRQ1 interrupt request on the base timer ch.4
bits : 9 - 8 (0 bit)
access : read-only

BTINT10 : IRQ0 interrupt request on the base timer ch.5
bits : 10 - 9 (0 bit)
access : read-only

BTINT11 : IRQ1 interrupt request on the base timer ch.5
bits : 11 - 10 (0 bit)
access : read-only

BTINT12 : IRQ0 interrupt request on the base timer ch.6
bits : 12 - 11 (0 bit)
access : read-only

BTINT13 : IRQ1 interrupt request on the base timer ch.6
bits : 13 - 12 (0 bit)
access : read-only

BTINT14 : IRQ0 interrupt request on the base timer ch.7
bits : 14 - 13 (0 bit)
access : read-only

BTINT15 : IRQ1 interrupt request on the base timer ch.7
bits : 15 - 14 (0 bit)
access : read-only


IRQ30MON

IRQ30 Batch Read Register
address_offset : 0x8C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IRQ30MON IRQ30MON read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RCEC0INT

RCEC0INT : Interrupt request for HDMI-CEC/Remote Control Reception ch.0
bits : 5 - 4 (0 bit)
access : read-only


IRQ31MON

IRQ31 Batch Read Register
address_offset : 0x90 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IRQ31MON IRQ31MON read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RCEC1INT

RCEC1INT : Interrupt request for HDMI-CEC/Remote Control Reception ch.1
bits : 6 - 5 (0 bit)
access : read-only



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.