\n
address_offset : 0x0 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x100 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x20 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x10 Bytes (0x0)
size : 0x8 byte (0x0)
mem_usage : registers
protection : not protected
Flash Access Size Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ASZ : Access Size
bits : 0 - 0 (1 bit)
access : read-write
Flash Sync Down Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SD : Sync Down
bits : 0 - 1 (2 bit)
access : read-write
CR Trimming Data Mirror Register
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TRMM : CR Trimming Data Mirror
bits : 0 - 8 (9 bit)
access : read-only
TTRMM : CR Temperature Trimming Data Mirror
bits : 16 - 19 (4 bit)
access : read-only
Flash Buffer Control Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BE : Buffer Enable
bits : 0 - -1 (0 bit)
access : read-write
BS : Buffer Status
bits : 1 - 0 (0 bit)
access : read-only
Flash Interrupt Control Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RDYIE : RDY Interrupt Enable
bits : 0 - -1 (0 bit)
access : read-write
HANGIE : HANG Interrupt Enable
bits : 1 - 0 (0 bit)
access : read-write
ERRIE : Flash ECC Error Interrupt Enable
bits : 2 - 1 (0 bit)
access : read-write
Flash Interrupt Status Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RDYIF : RDY Interrupt Flag
bits : 0 - -1 (0 bit)
access : read-only
HANGIF : HANG Interrupt Flag
bits : 1 - 0 (0 bit)
access : read-only
ERRIF : Flash ECC Error Interrupt Flag
bits : 2 - 1 (0 bit)
access : read-only
Flash Interrupt Clear Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
RDYIC : RDY Interrupt Clear
bits : 0 - -1 (0 bit)
access : read-write
HANGIC : HANG Interrupt Clear
bits : 1 - 0 (0 bit)
access : read-write
ERRIC : Flash ECC Error Interrupt Clear
bits : 2 - 1 (0 bit)
access : read-write
Flash Read Wait Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RWT : Read Wait Cycle
bits : 0 - 0 (1 bit)
access : read-write
Flash Status Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
RDY : Flash Rdy
bits : 0 - -1 (0 bit)
access : read-only
HNG : Flash Hang flag
bits : 1 - 0 (0 bit)
access : read-only
ERR : Flash ECC Error
bits : 2 - 1 (0 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.