\n
address_offset : 0x0 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x10 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x4 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x20 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x14 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x24 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
Peripheral Clock Control Register 0
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MFSCK0 : Settings for operation clock supply and gating to multi-function serial interface ch.0
bits : 0 - -1 (0 bit)
access : read-write
MFSCK : Settings for operation clock supply and gating to multi-function serial interface
bits : 0 - 14 (15 bit)
access : read-write
MFSCK1 : Settings for operation clock supply and gating to multi-function serial interface ch.1
bits : 1 - 0 (0 bit)
access : read-write
MFSCK2 : Settings for operation clock supply and gating to multi-function serial interface ch.2
bits : 2 - 1 (0 bit)
access : read-write
MFSCK3 : Settings for operation clock supply and gating to multi-function serial interface ch.3
bits : 3 - 2 (0 bit)
access : read-write
MFSCK4 : Settings for operation clock supply and gating to multi-function serial interface ch.4
bits : 4 - 3 (0 bit)
access : read-write
MFSCK5 : Settings for operation clock supply and gating to multi-function serial interface ch.5
bits : 5 - 4 (0 bit)
access : read-write
MFSCK6 : Settings for operation clock supply and gating to multi-function serial interface ch.6
bits : 6 - 5 (0 bit)
access : read-write
MFSCK7 : Settings for operation clock supply and gating to multi-function serial interface ch.7
bits : 7 - 6 (0 bit)
access : read-write
MFSCK8 : Settings for operation clock supply and gating to multi-function serial interface ch.8
bits : 8 - 7 (0 bit)
access : read-write
MFSCK9 : Settings for operation clock supply and gating to multi-function serial interface ch.9
bits : 9 - 8 (0 bit)
access : read-write
MFSCK10 : Settings for operation clock supply and gating to multi-function serial interface ch.10
bits : 10 - 9 (0 bit)
access : read-write
MFSCK11 : Settings for operation clock supply and gating to multi-function serial interface ch.11
bits : 11 - 10 (0 bit)
access : read-write
MFSCK12 : Settings for operation clock supply and gating to multi-function serial interface ch.12
bits : 12 - 11 (0 bit)
access : read-write
MFSCK13 : Settings for operation clock supply and gating to multi-function serial interface ch.13
bits : 13 - 12 (0 bit)
access : read-write
MFSCK14 : Settings for operation clock supply and gating to multi-function serial interface ch.14
bits : 14 - 13 (0 bit)
access : read-write
MFSCK15 : Settings for operation clock supply and gating to multi-function serial interface ch.15
bits : 15 - 14 (0 bit)
access : read-write
ADCCK0 : Settings for operation clock supplying and gating to A/D converter unit 0
bits : 16 - 15 (0 bit)
access : read-write
ADCCK : Settings for operation clock supplying and gating to AD converter
bits : 16 - 18 (3 bit)
access : read-write
ADCCK1 : Settings for operation clock supplying and gating to A/D converter unit 1
bits : 17 - 16 (0 bit)
access : read-write
ADCCK2 : Settings for operation clock supplying and gating to A/D converter unit 2
bits : 18 - 17 (0 bit)
access : read-write
ADCCK3 : Settings for operation clock supplying and gating to A/D converter unit 3
bits : 19 - 18 (0 bit)
access : read-write
DMACK : Supplying and gating settings of DMAC operation clock
bits : 24 - 23 (0 bit)
access : read-write
GIOCK : Software clock control of GPIO/Fast GPIO function
bits : 28 - 27 (0 bit)
access : read-write
Peripheral Clock Control Register 1
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BTMCK0 : Settings operation clock supply and gating to base timer 0/1/2/3
bits : 0 - -1 (0 bit)
access : read-write
BTMCK : Settings operation clock supply and gating to base timer
bits : 0 - 2 (3 bit)
access : read-write
BTMCK1 : Settings operation clock supply and gating to base timer 4/5/6/7
bits : 1 - 0 (0 bit)
access : read-write
BTMCK2 : Settings operation clock supply and gating to base timer 8/9/10/11
bits : 2 - 1 (0 bit)
access : read-write
BTMCK3 : Settings operation clock supply and gating to base timer 12/13/14/15
bits : 3 - 2 (0 bit)
access : read-write
MFTCK0 : Settings for operation clock supply and gating of multi-function timer 0 and PPG 0/2/4/6
bits : 8 - 7 (0 bit)
access : read-write
MFTCK : Settings for operation clock supply and gating of multi-function timer and PPG
bits : 8 - 10 (3 bit)
access : read-write
MFTCK1 : Settings for operation clock supply and gating of multi-function timer 1 and PPG 8/10/12/14
bits : 9 - 8 (0 bit)
access : read-write
MFTCK2 : Settings for operation clock supply and gating of multi-function timer 2 and PPG 16/18/20/22
bits : 10 - 9 (0 bit)
access : read-write
MFTCK3 : Settings for operation clock supply and gating of multi-function timer 3 and PPG 24/26/28/30
bits : 11 - 10 (0 bit)
access : read-write
QDUCK0 : Settings for operation clock supply and gating of quad counter unit 0
bits : 16 - 15 (0 bit)
access : read-write
QDUCK : Settings for operation clock supply and gating of quad counter
bits : 16 - 18 (3 bit)
access : read-write
QDUCK1 : Settings for operation clock supply and gating of quad counter unit 1
bits : 17 - 16 (0 bit)
access : read-write
QDUCK2 : Settings for operation clock supply and gating of quad counter unit 2
bits : 18 - 17 (0 bit)
access : read-write
QDUCK3 : Settings for operation clock supply and gating of quad counter unit 3
bits : 19 - 18 (0 bit)
access : read-write
Peripheral Reset Control Register 1
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BTMRST0 : Reset control of base timer 0/1/2/3
bits : 0 - -1 (0 bit)
access : read-write
BTMRST : Reset control of base timer
bits : 0 - 2 (3 bit)
access : read-write
BTMRST1 : Reset control of base timer 4/5/6/7
bits : 1 - 0 (0 bit)
access : read-write
BTMRST2 : Reset control of base timer 8/9/10/11
bits : 2 - 1 (0 bit)
access : read-write
BTMRST3 : Reset control of base timer 12/13/14/15
bits : 3 - 2 (0 bit)
access : read-write
MFTRST0 : Control of multi-function timer 0 and PPG 0/2/4/6 reset control
bits : 8 - 7 (0 bit)
access : read-write
MFTRST : Control of multi-function timer and PPG reset control
bits : 8 - 10 (3 bit)
access : read-write
MFTRST1 : Control of multi-function timer 1 and PPG 8/10/12/14 reset control
bits : 9 - 8 (0 bit)
access : read-write
MFTRST2 : Control of multi-function timer 2 and PPG 16/18/20/22 reset control
bits : 10 - 9 (0 bit)
access : read-write
MFTRST3 : Control of multi-function timer 3 and PPG 24/26/28/30 reset control
bits : 11 - 10 (0 bit)
access : read-write
QDURST0 : Reset control of quad counter unit 0
bits : 16 - 15 (0 bit)
access : read-write
QDURST : Reset control of quad counter
bits : 16 - 18 (3 bit)
access : read-write
QDURST1 : Reset control of quad counter unit 1
bits : 17 - 16 (0 bit)
access : read-write
QDURST2 : Reset control of quad counter unit 2
bits : 18 - 17 (0 bit)
access : read-write
QDURST3 : Reset control of quad counter unit 3
bits : 19 - 18 (0 bit)
access : read-write
Peripheral Clock Control Register 2
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CANCK0 : $
bits : 4 - 3 (0 bit)
access : read-write
CANCK : Settings for clock supply and gating to CAN controller
bits : 4 - 4 (1 bit)
access : read-write
CANCK1 : Peripheral Function Clock Control Register 2
bits : 5 - 4 (0 bit)
access : read-write
Peripheral Reset Control Reset 2
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CANRST0 : $
bits : 4 - 3 (0 bit)
access : read-write
CANRST : Reset control of CAN controller
bits : 4 - 4 (1 bit)
access : read-write
CANRST1 : Peripheral Function Reset Control Register 2
bits : 5 - 4 (0 bit)
access : read-write
Peripheral Reset Control Register 0
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MFSRST0 : Control of software reset of multi-function serial interface ch.0
bits : 0 - -1 (0 bit)
access : read-write
MFSRST : Control of software reset of multi-function serial interface
bits : 0 - 14 (15 bit)
access : read-only
MFSRST1 : Control of software reset of multi-function serial interface ch.1
bits : 1 - 0 (0 bit)
access : read-write
MFSRST2 : Control of software reset of multi-function serial interface ch.2
bits : 2 - 1 (0 bit)
access : read-write
MFSRST3 : Control of software reset of multi-function serial interface ch.3
bits : 3 - 2 (0 bit)
access : read-write
MFSRST4 : Control of software reset of multi-function serial interface ch.4
bits : 4 - 3 (0 bit)
access : read-write
MFSRST5 : Control of software reset of multi-function serial interface ch.5
bits : 5 - 4 (0 bit)
access : read-write
MFSRST6 : Control of software reset of multi-function serial interface ch.6
bits : 6 - 5 (0 bit)
access : read-write
MFSRST7 : Control of software reset of multi-function serial interface ch.7
bits : 7 - 6 (0 bit)
access : read-write
MFSRST8 : Control of software reset of multi-function serial interface ch.8
bits : 8 - 7 (0 bit)
access : read-write
MFSRST9 : Control of software reset of multi-function serial interface ch.9
bits : 9 - 8 (0 bit)
access : read-write
MFSRST10 : Control of software reset of multi-function serial interface ch.10
bits : 10 - 9 (0 bit)
access : read-write
MFSRST11 : Control of software reset of multi-function serial interface ch.11
bits : 11 - 10 (0 bit)
access : read-write
MFSRST12 : Control of software reset of multi-function serial interface ch.12
bits : 12 - 11 (0 bit)
access : read-write
MFSRST13 : Control of software reset of multi-function serial interface ch.13
bits : 13 - 12 (0 bit)
access : read-write
MFSRST14 : Control of software reset of multi-function serial interface ch.14
bits : 14 - 13 (0 bit)
access : read-write
MFSRST15 : Control of software reset of multi-function serial interface ch.15
bits : 15 - 14 (0 bit)
access : read-write
ADCRST0 : Reset control of A/D converter unit 0
bits : 16 - 15 (0 bit)
access : read-write
ADCRST : Reset control of AD converter
bits : 16 - 18 (3 bit)
access : read-write
ADCRST1 : Reset control of A/D converter unit 1
bits : 17 - 16 (0 bit)
access : read-write
ADCRST2 : Reset control of A/D converter unit 2
bits : 18 - 17 (0 bit)
access : read-write
ADCRST3 : Reset control of A/D converter unit 3
bits : 19 - 18 (0 bit)
access : read-write
DMARST : Reset control of DMAC
bits : 24 - 23 (0 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.