\n
address_offset : 0x200 Bytes (0x0)
size : 0x20 byte (0x0)
mem_usage : registers
protection : not protected
Px.0 Data Output Value
address_offset : 0x200 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.0 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Px.1 Data Output Value
address_offset : 0x204 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.1 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Px.2 Data Output Value
address_offset : 0x208 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.2 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Px.3 Data Output Value
address_offset : 0x20C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.3 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Px.4 Data Output Value
address_offset : 0x210 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.4 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Px.5 Data Output Value
address_offset : 0x214 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.5 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Px.6 Data Output Value
address_offset : 0x218 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.6 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Px.7 Data Output Value
address_offset : 0x21C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DOUT : P0.7 I/O Pin Bit Output Control Set this bit can control one GPIO pin output value 1 = Set corresponding GPIO bit to high 0 = Set corresponding GPIO bit to low
bits : 0 - 0 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.