\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
Divider minus 1 for the 1 second counter. Safe to change the value when RTC is not enabled.
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CLKDIV_M1 :
bits : 0 - 15 (16 bit)
access : read-write
Interrupt setup register 0
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DAY : Day of the month (1..31)
bits : 0 - 4 (5 bit)
access : read-write
MONTH : Month (1..12)
bits : 8 - 11 (4 bit)
access : read-write
YEAR : Year
bits : 12 - 23 (12 bit)
access : read-write
DAY_ENA : Enable day matching
bits : 24 - 24 (1 bit)
access : read-write
MONTH_ENA : Enable month matching
bits : 25 - 25 (1 bit)
access : read-write
YEAR_ENA : Enable year matching
bits : 26 - 26 (1 bit)
access : read-write
MATCH_ENA : Global match enable. Don't change any other value while this one is enabled
bits : 28 - 28 (1 bit)
access : read-write
MATCH_ACTIVE :
bits : 29 - 29 (1 bit)
access : read-only
Interrupt setup register 1
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEC : Seconds
bits : 0 - 5 (6 bit)
access : read-write
MIN : Minutes
bits : 8 - 13 (6 bit)
access : read-write
HOUR : Hours
bits : 16 - 20 (5 bit)
access : read-write
DOTW : Day of the week
bits : 24 - 26 (3 bit)
access : read-write
SEC_ENA : Enable second matching
bits : 28 - 28 (1 bit)
access : read-write
MIN_ENA : Enable minute matching
bits : 29 - 29 (1 bit)
access : read-write
HOUR_ENA : Enable hour matching
bits : 30 - 30 (1 bit)
access : read-write
DOTW_ENA : Enable day of the week matching
bits : 31 - 31 (1 bit)
access : read-write
RTC register 1.
address_offset : 0x18 Bytes (0x0)
size : 32 bit
reset_value : 0x0
DAY : Day of the month (1..31)
bits : 0 - 4 (5 bit)
access : read-only
MONTH : Month (1..12)
bits : 8 - 11 (4 bit)
access : read-only
YEAR : Year
bits : 12 - 23 (12 bit)
access : read-only
RTC register 0
Read this before RTC 1!
address_offset : 0x1C Bytes (0x0)
size : 32 bit
reset_value : 0x0
SEC : Seconds
bits : 0 - 5 (6 bit)
access : read-only
MIN : Minutes
bits : 8 - 13 (6 bit)
access : read-only
HOUR : Hours
bits : 16 - 20 (5 bit)
access : read-only
DOTW : Day of the week
bits : 24 - 26 (3 bit)
access : read-only
Raw Interrupts
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTC :
bits : 0 - 0 (1 bit)
access : read-only
Interrupt Enable
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTC :
bits : 0 - 0 (1 bit)
access : read-write
Interrupt Force
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTC :
bits : 0 - 0 (1 bit)
access : read-write
Interrupt status after masking & forcing
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTC :
bits : 0 - 0 (1 bit)
access : read-only
RTC setup register 0
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DAY : Day of the month (1..31)
bits : 0 - 4 (5 bit)
access : read-write
MONTH : Month (1..12)
bits : 8 - 11 (4 bit)
access : read-write
YEAR : Year
bits : 12 - 23 (12 bit)
access : read-write
RTC setup register 1
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEC : Seconds
bits : 0 - 5 (6 bit)
access : read-write
MIN : Minutes
bits : 8 - 13 (6 bit)
access : read-write
HOUR : Hours
bits : 16 - 20 (5 bit)
access : read-write
DOTW : Day of the week: 1-Monday...0-Sunday ISO 8601 mod 7
bits : 24 - 26 (3 bit)
access : read-write
RTC Control and status
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTC_ENABLE : Enable RTC
bits : 0 - 0 (1 bit)
access : read-write
RTC_ACTIVE : RTC enabled (running)
bits : 1 - 1 (1 bit)
access : read-only
LOAD : Load RTC
bits : 4 - 4 (1 bit)
access : read-write
FORCE_NOTLEAPYEAR : If set, leapyear is forced off.
Useful for years divisible by 100 but not by 400
bits : 8 - 8 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.