\n

LDO_0

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0xFFC byte (0x0)
mem_usage : registers
protection : not protected

Registers

CONTROL


CONTROL

Control
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CONTROL CONTROL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ALDOOVAL ALDOBSEL ALDOSSEL MLDOOVAL MLDOBSEL MLDOSSEL DLDOOVAL DLDOBSEL DLDOSSEL

ALDOOVAL : Analog LDO Output Value Select.
bits : 0 - 4 (5 bit)

ALDOBSEL : Analog LDO Bias Select.
bits : 5 - 5 (1 bit)

Enumeration:

0 : LOW

Select a low bias for the analog LDO.

1 : HIGH

Select a high bias for the analog LDO.

End of enumeration elements list.

ALDOSSEL : Analog LDO Source Select.
bits : 6 - 6 (1 bit)

Enumeration:

0 : VBAT

Select the VBAT pin as the input voltage to the analog LDO.

1 : DCDC

Select the output of the DC-DC converter as the input voltage to the analog LDO.

End of enumeration elements list.

MLDOOVAL : Memory LDO Output Value Select.
bits : 8 - 12 (5 bit)

MLDOBSEL : Memory LDO Bias Select.
bits : 13 - 13 (1 bit)

Enumeration:

0 : LOW

Select a low bias for the memory LDO.

1 : HIGH

Select a high bias for the memory LDO.

End of enumeration elements list.

MLDOSSEL : Memory LDO Source Select.
bits : 14 - 14 (1 bit)

Enumeration:

0 : VBAT

Select the VBAT pin as the input voltage to the memory LDO.

1 : DCDC

Select the output of the DC-DC converter as the input voltage to the memory LDO.

End of enumeration elements list.

DLDOOVAL : Digital LDO Output Value Select.
bits : 16 - 20 (5 bit)

DLDOBSEL : Digital LDO Bias Select.
bits : 21 - 21 (1 bit)

Enumeration:

0 : LOW

Select a low bias for the digital LDO.

1 : HIGH

Select a high bias for the digital LDO.

End of enumeration elements list.

DLDOSSEL : Digital LDO Source Select.
bits : 22 - 22 (1 bit)

Enumeration:

0 : VBAT

Select the VBAT pin as the input voltage to the digital LDO.

1 : DCDC

Select the output of the DC-DC converter as the input voltage to the digital LDO.

End of enumeration elements list.



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.