\n
address_offset : 0x0 Bytes (0x0)
size : 0xFFC byte (0x0)
mem_usage : registers
protection : not protected
System Reset Source Enable
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VMONREN : Voltage Supply Monitor VBAT Reset Enable.
bits : 2 - 2 (1 bit)
Enumeration:
0 : DISABLED
Disable the Voltage Supply Monitor VBAT event as a reset source.
1 : ENABLED
Enable the Voltage Supply Monitor VBAT event as a reset source.
End of enumeration elements list.
MCDREN : Missing Clock Detector Reset Enable.
bits : 4 - 4 (1 bit)
Enumeration:
0 : DISABLED
Disable the Missing Clock Detector event as a reset source.
1 : ENABLED
Enable the Missing Clock Detector event as a reset source.
End of enumeration elements list.
WDTREN : Watchdog Timer Reset Enable.
bits : 5 - 5 (1 bit)
Enumeration:
0 : DISABLED
Disable the Watchdog Timer event as a reset source.
1 : ENABLED
Enable the Watchdog Timer event as a reset source.
End of enumeration elements list.
SWREN : Software Reset.
bits : 6 - 6 (1 bit)
Enumeration:
0 : DISABLED
Do not generate a Software Reset.
1 : ENABLED
Generate a Software Reset.
End of enumeration elements list.
CMP0REN : Comparator 0 Reset Enable.
bits : 7 - 7 (1 bit)
Enumeration:
0 : DISABLED
Disable the Comparator 0 event as a reset source.
1 : ENABLED
Enable the Comparator 0 event as a reset source.
End of enumeration elements list.
CMP1REN : Comparator 1 Reset Enable.
bits : 8 - 8 (1 bit)
Enumeration:
0 : DISABLED
Disable the Comparator 1 event as a reset source.
1 : ENABLED
Enable the Comparator 1 event as a reset source.
End of enumeration elements list.
CPFREN : Low Power Mode Charge Pump Supply Fail Reset Enable.
bits : 9 - 9 (1 bit)
Enumeration:
0 : DISABLED
Disable the low power mode charge pump supply fail event as a reset source.
1 : ENABLED
Enable the low power mode charge pump supply fail event as a reset source.
End of enumeration elements list.
RTC0REN : RTC0 Reset Enable.
bits : 10 - 10 (1 bit)
Enumeration:
0 : DISABLED
Disable the RTC0 event as a reset source.
1 : ENABLED
Enable the RTC0 event as a reset source.
End of enumeration elements list.
CPMREN : Low Power Mode Charge Pump Module Reset Enable.
bits : 27 - 27 (1 bit)
Enumeration:
0 : DISABLED
Disable low power mode charge pump module resets.
1 : ENABLED
Enable low power mode charge pump module resets.
End of enumeration elements list.
UART0MREN : UART0 Module Reset Enable.
bits : 28 - 28 (1 bit)
Enumeration:
0 : DISABLED
Disable UART0 module resets.
1 : ENABLED
Enable UART0 module resets.
End of enumeration elements list.
LCD0MREN : LCD0 Module Reset Enable.
bits : 29 - 29 (1 bit)
Enumeration:
0 : DISABLED
Disable LCD0 module resets.
1 : ENABLED
Enable LCD0 module resets.
End of enumeration elements list.
ACC0MREN : ACCTR0 Module Reset Enable.
bits : 30 - 30 (1 bit)
Enumeration:
0 : DISABLED
Disable ACCTR0 module resets.
1 : ENABLED
Enable ACCTR0 module resets.
End of enumeration elements list.
RTC0MREN : RTC0 Module Reset Enable.
bits : 31 - 31 (1 bit)
Enumeration:
0 : DISABLED
Disable RTC0 module resets.
1 : ENABLED
Enable RTC0 module resets.
End of enumeration elements list.
System Reset Flags
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PINRF : Pin Reset Flag.
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A /RESET pin event did not cause the last system reset.
1 : SET
A /RESET pin event caused the last system reset.
End of enumeration elements list.
PORRF : Power-On Reset Flag.
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Power-On Reset event did not cause the last system reset.
1 : SET
A Power-On Reset event caused the last system reset.
End of enumeration elements list.
VMONRF : Voltage Supply Monitor VBAT Reset Flag.
bits : 2 - 2 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Voltage Supply Monitor VBAT Reset event did not cause the last system reset.
1 : SET
A Voltage Supply Monitor VBAT Reset event caused the last system reset.
End of enumeration elements list.
CORERF : Core Reset Flag.
bits : 3 - 3 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Core Reset event did not cause the last system reset.
1 : SET
A Core Reset event caused the last system reset.
End of enumeration elements list.
MCDRF : Missing Clock Detector Reset Flag.
bits : 4 - 4 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Missing Clock Detector event did not cause the last system reset.
1 : SET
A Missing Clock Detector event caused the last system reset.
End of enumeration elements list.
WDTRF : Watchdog Timer Reset Flag.
bits : 5 - 5 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Watchdog Timer event did not cause the last system reset.
1 : SET
A Watchdog Timer event caused the last system reset.
End of enumeration elements list.
SWRF : Software Reset Flag.
bits : 6 - 6 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Software Reset event did not cause the last system reset.
1 : SET
A Software Reset event caused the last system reset.
End of enumeration elements list.
CMP0RF : Comparator 0 Reset Flag.
bits : 7 - 7 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Comparator 0 event did not cause the last system reset.
1 : SET
A Comparator 0 event caused the last system reset.
End of enumeration elements list.
CMP1RF : Comparator 1 Reset Flag.
bits : 8 - 8 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A Comparator 1 event did not cause the last system reset.
1 : SET
A Comparator 1 event caused the last system reset.
End of enumeration elements list.
CPFRF : Low Power Mode Charge Pump Supply Fail Reset Flag.
bits : 9 - 9 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A low power mode charge pump supply fail event did not cause the last system reset.
1 : SET
A low power mode charge pump supply fail event caused the last system reset.
End of enumeration elements list.
RTC0RF : RTC0 Reset Flag.
bits : 10 - 10 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
An RTC0 event did not cause the last system reset.
1 : SET
An RTC0 event caused the last system reset.
End of enumeration elements list.
WAKERF : PMU Wakeup Reset Flag.
bits : 11 - 11 (1 bit)
access : read-only
Enumeration:
0 : NOT_SET
A PMU Wakeup event did not cause the last system reset.
1 : SET
A PMU Wakeup event caused the last system reset.
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.