\n
address_offset : 0x0 Bytes (0x0)
size : 0x40 byte (0x0)
mem_usage : registers
protection : not protected
GPIO Port Output
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port output 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P0 = 1
1 : high
Set output high if GPIOn->OUTEN.P0 = 1
End of enumeration elements list.
P1 : Port output 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P1 = 1
1 : high
Set output high if GPIOn->OUTEN.P1 = 1
End of enumeration elements list.
P2 : Port output 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P2 = 1
1 : high
Set output high if GPIOn->OUTEN.P2 = 1
End of enumeration elements list.
P3 : Port output 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P3 = 1
1 : high
Set output high if GPIOn->OUTEN.P3 = 1
End of enumeration elements list.
P4 : Port output 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P4 = 1
1 : high
Set output high if GPIOn->OUTEN.P4 = 1
End of enumeration elements list.
P5 : Port output 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P5 = 1
1 : high
Set output high if GPIOn->OUTEN.P5 = 1
End of enumeration elements list.
P6 : Port output 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P6 = 1
1 : high
Set output high if GPIOn->OUTEN.P6 = 1
End of enumeration elements list.
P7 : Port output 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : low
Set output low if GPIOn->OUTEN.P7 = 1
1 : high
Set output high if GPIOn->OUTEN.P7 = 1
End of enumeration elements list.
GPIO Port Weak Pull Down
address_offset : 0x10 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - -1 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
P1 : Port
bits : 1 - 0 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
P2 : Port
bits : 2 - 1 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
P3 : Port
bits : 3 - 2 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
P4 : Port
bits : 4 - 3 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
P5 : Port
bits : 5 - 4 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
P6 : Port
bits : 6 - 5 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
P7 : Port
bits : 7 - 6 (0 bit)
Enumeration:
0 : disabled
Weak pull-down disabled
1 : enabled
Weak pull-down to VSS enabled
End of enumeration elements list.
GPIO Port Input
address_offset : 0x14 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - -1 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
P1 : Port
bits : 1 - 0 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
P2 : Port
bits : 2 - 1 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
P3 : Port
bits : 3 - 2 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
P4 : Port
bits : 4 - 3 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
P5 : Port
bits : 5 - 4 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
P6 : Port
bits : 6 - 5 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
P7 : Port
bits : 7 - 6 (0 bit)
Enumeration:
0 : low
Logic low
1 : high
Logic high
End of enumeration elements list.
GPIO Peripheral Select
address_offset : 0x1C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - 0 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
P1 : Port
bits : 2 - 2 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
P2 : Port
bits : 4 - 4 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
P3 : Port
bits : 6 - 6 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
P4 : Port
bits : 8 - 8 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
P5 : Port
bits : 10 - 10 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
P6 : Port
bits : 12 - 12 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
P7 : Port
bits : 14 - 14 (1 bit)
Enumeration:
0 : IO
Port in I/O mode
1 : Peripheral 1
Peripheral Configuration 1
2 : Peripheral 2
Peripheral Configuration 2
3 : Peripheral 3
Peripheral Configuration 3
End of enumeration elements list.
GPIO Port Interrupt Polarity
address_offset : 0x20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - -1 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
P1 : Port
bits : 1 - 0 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
P2 : Port
bits : 2 - 1 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
P3 : Port
bits : 3 - 2 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
P4 : Port
bits : 4 - 3 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
P5 : Port
bits : 5 - 4 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
P6 : Port
bits : 6 - 5 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
P7 : Port
bits : 7 - 6 (0 bit)
Enumeration:
0 : falling
Falling edge, high to low transition
1 : rising
Rising edge, low to high transition
End of enumeration elements list.
GPIO Port Interrupt Enable
address_offset : 0x24 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - -1 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
P1 : Port
bits : 1 - 0 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
P2 : Port
bits : 2 - 1 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
P3 : Port
bits : 3 - 2 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
P4 : Port
bits : 4 - 3 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
P5 : Port
bits : 5 - 4 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
P6 : Port
bits : 6 - 5 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
P7 : Port
bits : 7 - 6 (0 bit)
Enumeration:
0 : disable
Disable interrupt
1 : enable
Enable interrupt
End of enumeration elements list.
GPIO Port Interrupt Flag
address_offset : 0x28 Bytes (0x0)
size : -1 bit
access : read-writeOnce
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - -1 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
P1 : Port
bits : 1 - 0 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
P2 : Port
bits : 2 - 1 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
P3 : Port
bits : 3 - 2 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
P4 : Port
bits : 4 - 3 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
P5 : Port
bits : 5 - 4 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
P6 : Port
bits : 6 - 5 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
P7 : Port
bits : 7 - 6 (0 bit)
Enumeration:
0 : none
No interrupt pending
1 : interrupt
Interrupt pending
End of enumeration elements list.
GPIO Port Interrupt Mask
address_offset : 0x2C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - -1 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
P1 : Port
bits : 1 - 0 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
P2 : Port
bits : 2 - 1 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
P3 : Port
bits : 3 - 2 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
P4 : Port
bits : 4 - 3 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
P5 : Port
bits : 5 - 4 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
P6 : Port
bits : 6 - 5 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
P7 : Port
bits : 7 - 6 (0 bit)
Enumeration:
0 : disabled
Disable interrupt mask
1 : enabled
Enable interrupt mask
End of enumeration elements list.
GPIO Port Output Enable
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port output enable 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P0
End of enumeration elements list.
P1 : Port output enable 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P1
End of enumeration elements list.
P2 : Port output enable 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P2
End of enumeration elements list.
P3 : Port output enable 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P3
End of enumeration elements list.
P4 : Port output enable 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P4
End of enumeration elements list.
P5 : Port output enable 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P5
End of enumeration elements list.
P6 : Port output enable 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P6
End of enumeration elements list.
P7 : Port output enable 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : low
Output disabled, high-impedance state
1 : high
Output state set by GPIOn->OUT.P7
End of enumeration elements list.
GPIO Port Output Drive Strength Select
address_offset : 0x8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port output drive strength select 0
bits : 0 - -1 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
P1 : Port output drive strength select 1
bits : 1 - 0 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
P2 : Port output drive strength select 2
bits : 2 - 1 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
P3 : Port output drive strength select 3
bits : 3 - 2 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
P4 : Port output drive strength select 4
bits : 4 - 3 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
P5 : Port output drive strength select 5
bits : 5 - 4 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
P6 : Port output drive strength select 6
bits : 6 - 5 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
P7 : Port output drive strength select 7
bits : 7 - 6 (0 bit)
Enumeration:
0 : low
Low output drive strength selected
1 : high
High output drive strength selected
End of enumeration elements list.
GPIO Port Weak Pull Up
address_offset : 0xC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
P0 : Port
bits : 0 - -1 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
P1 : Port
bits : 1 - 0 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
P2 : Port
bits : 2 - 1 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
P3 : Port
bits : 3 - 2 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
P4 : Port
bits : 4 - 3 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
P5 : Port
bits : 5 - 4 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
P6 : Port
bits : 6 - 5 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
P7 : Port
bits : 7 - 6 (0 bit)
Enumeration:
0 : disabled
Weak pull-up disabled
1 : enabled
Weak pull-up to VCCIO enabled
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.