Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x78 byte (0x0)
mem_usage : registers
protection : not protected
Internal Reference Control register
address_offset : 0x30 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
REFPD : Power down reference
bits : 0 - 0 (1 bit)
Enumeration:
0 : DIS
None
1 : EN
None
End of enumeration elements list.
Controls the on-chip Excitation Current Sources
address_offset : 0x40 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IPSEL0 : Select IEXC0 pin AIN- bits
bits : 0 - 2 (3 bit)
Enumeration:
0 : Off
None
4 : AIN4
None
5 : AIN5
None
6 : AIN6
None
7 : AIN7
None
End of enumeration elements list.
IPSEL1 : Select IEXC1 pin AIN- bits
bits : 3 - 5 (3 bit)
Enumeration:
0 : Off
None
4 : AIN4
None
5 : AIN5
None
6 : AIN6
None
7 : AIN7
None
End of enumeration elements list.
REFSEL : IREF Source- bits
bits : 6 - 6 (1 bit)
Enumeration:
0 : Ext
None
1 : Int
None
End of enumeration elements list.
PD : IEXC Power down- bits
bits : 7 - 7 (1 bit)
Enumeration:
1 : En
None
0 : off
None
End of enumeration elements list.
Sets the output current setting for both Excitation Current sources
address_offset : 0x44 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IDAT0 : 10uA Enable
bits : 0 - 0 (1 bit)
Enumeration:
0 : DIS
None
1 : EN
None
End of enumeration elements list.
IDAT : Output Current- bits
bits : 1 - 5 (5 bit)
Enumeration:
0 : 0uA
None
4 : 50uA
None
5 : 100uA
None
6 : 150uA
None
7 : 200uA
None
20 : 250uA
None
10 : 300uA
None
11 : 400uA
None
14 : 450uA
None
21 : 500uA
None
15 : 600uA
None
22 : 750uA
None
19 : 800uA
None
31 : 1mA
None
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.