\n
address_offset : 0x0 Bytes (0x0)
size : 0x100 byte (0x0)
mem_usage : registers
protection : not protected
Beeper Configuration
address_offset : 0x0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEQREPEAT : Beeper Sequence Repeat Value
bits : 0 - 7 (8 bit)
access : read-write
EN : Beeper Enable
bits : 8 - 8 (1 bit)
access : write-only
ASTARTIRQ : Tone A Start IRQ
bits : 10 - 10 (1 bit)
access : read-write
AENDIRQ : Tone A End IRQ
bits : 11 - 11 (1 bit)
access : read-write
BSTARTIRQ : Tone B Start IRQ
bits : 12 - 12 (1 bit)
access : read-write
BENDIRQ : Tone B End IRQ
bits : 13 - 13 (1 bit)
access : read-write
SEQNEARENDIRQ : Sequence 1 Cycle from End IRQ
bits : 14 - 14 (1 bit)
access : read-write
SEQATENDIRQ : Sequence End IRQ
bits : 15 - 15 (1 bit)
access : read-write
Beeper Status
address_offset : 0x4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEQREMAIN : Remaining Tone-pair Iterations to Play in Sequence Mode
bits : 0 - 7 (8 bit)
access : read-only
BUSY : Beeper is Busy
bits : 8 - 8 (1 bit)
access : read-only
ASTARTED : Tone A Has Started
bits : 10 - 10 (1 bit)
access : read-write
AENDED : Tone A Has Ended
bits : 11 - 11 (1 bit)
access : read-write
BSTARTED : Tone B Has Started
bits : 12 - 12 (1 bit)
access : read-write
BENDED : Tone B Has Ended
bits : 13 - 13 (1 bit)
access : read-write
SEQNEAREND : Sequencer Last Tone-pair Has Started
bits : 14 - 14 (1 bit)
access : read-write
SEQENDED : Sequencer Has Ended
bits : 15 - 15 (1 bit)
access : read-write
Tone A Data
address_offset : 0x8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DUR : Tone Duration
bits : 0 - 7 (8 bit)
access : read-write
FREQ : Tone Frequency
bits : 8 - 14 (7 bit)
access : read-write
DIS : Output Disable
bits : 15 - 15 (1 bit)
access : read-write
Tone B Data
address_offset : 0xC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DUR : Tone Duration
bits : 0 - 7 (8 bit)
access : read-write
FREQ : Tone Frequency
bits : 8 - 14 (7 bit)
access : read-write
DIS : Output Disable
bits : 15 - 15 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.