\n
address_offset : 0x0 Bytes (0x0)
size : 0x50 byte (0x0)
mem_usage : registers
protection : not protected
LED Connections
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LED0 :
bits : 0 - 0 (1 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
LED1 :
bits : 1 - 2 (2 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
1Hz Up Counter
address_offset : 0x10 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
100Hz Up Counter
address_offset : 0x14 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
Cycle up counter
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Reload value for prescaler counter
address_offset : 0x1C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Prescale Counter
address_offset : 0x20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Misc. Control
address_offset : 0x4C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CLCD_CS :
bits : 0 - 0 (1 bit)
SPI_nSS :
bits : 1 - 2 (2 bit)
CLCD_RESET :
bits : 3 - 6 (4 bit)
CLCD_RS :
bits : 4 - 8 (5 bit)
CLCD_RD :
bits : 5 - 10 (6 bit)
CLCD_BL_CTRL :
bits : 6 - 12 (7 bit)
ADC_SPI_nCS :
bits : 7 - 14 (8 bit)
SHIELD0_SPI_nCS :
bits : 8 - 16 (9 bit)
SHIELD1_SPI_nCS :
bits : 9 - 18 (10 bit)
Button Connections
address_offset : 0x8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BUTTON0 :
bits : 0 - 0 (1 bit)
Enumeration:
0 : Off
BUTTON is off
1 : On
BUTTON is on
End of enumeration elements list.
BUTTON1 :
bits : 1 - 2 (2 bit)
Enumeration:
0 : Off
BUTTON is off
1 : On
BUTTON is on
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.