\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
REMAP : 1 = REMAP Block RAM to ZBT
bits : 0 - 0 (1 bit)
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
BRDREV : Board Revision
bits : 0 - 3 (4 bit)
DLL Lock Register
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LOCKED : Complete Flag
bits : 0 - 0 (1 bit)
LOCK_UNLOCK : Complete Flag
bits : 16 - 39 (24 bit)
LOCKED_MASKED : Error Flag
bits : 24 - 55 (32 bit)
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DEBUG : Debug: 0 = Serial Wire Debug 1 = JTAG
bits : 5 - 10 (6 bit)
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MCC_LED0 : MCC LEDs: 0 = OFF 1 = ON
bits : 0 - 0 (1 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
MCC_LED1 : MCC LEDs: 0 = OFF 1 = ON
bits : 1 - 2 (2 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
MCC_LED2 : MCC LEDs: 0 = OFF 1 = ON
bits : 2 - 4 (3 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
MCC_LED3 : MCC LEDs: 0 = OFF 1 = ON
bits : 3 - 6 (4 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
MCC_LED4 : MCC LEDs: 0 = OFF 1 = ON
bits : 4 - 8 (5 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
MCC_LED5 : MCC LEDs: 0 = OFF 1 = ON
bits : 5 - 10 (6 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
MCC_LED6 : MCC LEDs: 0 = OFF 1 = ON
bits : 6 - 12 (7 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
MCC_LED7 : MCC LEDs: 0 = OFF 1 = ON
bits : 7 - 14 (8 bit)
Enumeration:
0 : Off
LED is off
1 : On
LED is on
End of enumeration elements list.
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
address_offset : 0xA0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
address_offset : 0xA4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
address_offset : 0xA8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DEVICE : Device (value of 0/1/2 for supported clocks
bits : 0 - 11 (12 bit)
RFUNCVAL : Function Value
bits : 20 - 45 (26 bit)
RW_ACCESS : Read/Write Access
bits : 30 - 60 (31 bit)
START : Start: generates interrupt on write to this bit
bits : 31 - 62 (32 bit)
address_offset : 0xAC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMPLETE : Complete Flag
bits : 0 - 0 (1 bit)
ERROR : Error Flag
bits : 1 - 2 (2 bit)
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
MCC_SWITCHE0 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 0 - 0 (1 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
MCC_SWITCHE1 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 1 - 2 (2 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
MCC_SWITCHE2 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 2 - 4 (3 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
MCC_SWITCHE3 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 3 - 6 (4 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
MCC_SWITCHE4 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 4 - 8 (5 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
MCC_SWITCHE5 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 5 - 10 (6 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
MCC_SWITCHE6 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 6 - 12 (7 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
MCC_SWITCHE7 : MCC SWITCHES: 0 = OFF 1 = ON
bits : 7 - 14 (8 bit)
Enumeration:
0 : Off
Switch is off
1 : On
Switch is on
End of enumeration elements list.
address_offset : 0xFF8 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
NUM_CFG_REG : Number of SCC configuration register
bits : 0 - 7 (8 bit)
MPS2_REV : V2M-MPS2 target Board Revision (A=0,B=1,C=2)
bits : 20 - 43 (24 bit)
FPGA_BUILD : FPGA Build Number
bits : 24 - 55 (32 bit)
address_offset : 0xFFC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
APP_REV : Application note IP revision number
bits : 0 - 3 (4 bit)
PRI_NUM : Primary Part Number: 383 = AN383
bits : 4 - 15 (12 bit)
IP_ARCH : IP Architecture: 0x4 = AHB
bits : 16 - 35 (20 bit)
APP_NOTE_VAR : Application note IP variant number
bits : 20 - 43 (24 bit)
IMPLEMENTER_ID : Implementer ID: 0x41 = ARM
bits : 24 - 55 (32 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.