\n

I2SPRE

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x10 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0xC Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x4 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x8 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x1C Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x20 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x14 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x18 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x24 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

Registers

ICCR

IPCR4

IP_STR

IPINT_ENR

IPINT_CLR

IPINT_STR

IPCR5

IPCR1

IPCR2

IPCR3


ICCR

I2S Clock Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ICCR ICCR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ICEN ICSEL

ICEN : I2S clock output enable bit
bits : 0 - -1 (0 bit)
access : read-write

ICSEL : I2S clock selection bit
bits : 1 - 0 (0 bit)
access : read-write


IPCR4

I2S-PLL Control Register 4
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPCR4 IPCR4 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPLLN

IPLLN : Frequency division ratio (N) setting bits of the I2S-PLL clock
bits : 0 - 5 (6 bit)
access : read-write


IP_STR

I2S-PLL Status Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IP_STR IP_STR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPRDY

IPRDY : I2S-PLL oscillation stabilization bit
bits : 0 - -1 (0 bit)
access : read-only


IPINT_ENR

I2S-PLL Interrupt Factor Enable Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPINT_ENR IPINT_ENR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPCSE

IPCSE : I2S-PLL oscillation stabilization wait complete interrupt enable bit
bits : 0 - -1 (0 bit)
access : read-write


IPINT_CLR

I2S-PLL Interrupt Factor Status Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPINT_CLR IPINT_CLR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPCSC

IPCSC : I2S-PLL interrupt factor status bit
bits : 0 - -1 (0 bit)
access : write-only


IPINT_STR

I2S-PLL Interrupt Factor Clear Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPINT_STR IPINT_STR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPCSI

IPCSI : I2S-PLL oscillation stabilization interrupt factor clear bit
bits : 0 - -1 (0 bit)
access : read-only


IPCR5

I2S-PLL Control Register 5
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPCR5 IPCR5 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPLLM

IPLLM : Frequency division ratio (M) setting bits of the I2S-PLL clock
bits : 0 - 5 (6 bit)
access : read-write


IPCR1

I2S-PLL Control Register 1
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPCR1 IPCR1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPLLEN

IPLLEN : I2S-PLL oscillation enable bit
bits : 0 - -1 (0 bit)
access : read-write


IPCR2

I2S-PLL Control Register 2
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPCR2 IPCR2 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPOWT

IPOWT : I2S-PLL oscillation stabilization wait time setting bits
bits : 0 - 1 (2 bit)
access : read-write


IPCR3

I2S-PLL Control Register 3
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IPCR3 IPCR3 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPLLK

IPLLK : Frequency division ratio (K) setting bits of the I2S-PLL clock
bits : 0 - 3 (4 bit)
access : read-write



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.