\n

GDCPRE

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x10 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0xC Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x4 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x8 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x1C Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x20 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x14 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x18 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x28 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x2C Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x30 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected

Registers

GCCR

GPCR4

GP_STR

GPINT_ENR

GPINT_CLR

GPINT_STR

GCSR

GRCR

GMCR

GPCR1

GPCR2

GPCR3


GCCR

GSS Clock Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GCCR GCCR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GSSEN

GSSEN : GSS clock output enable/disable setting bit
bits : 0 - -1 (0 bit)
access : read-write


GPCR4

GSS PLL Control Register 4
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPCR4 GPCR4 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPLLN

GPLLN : PLL feedback frequency division rasio seting bits
bits : 0 - 5 (6 bit)
access : read-write


GP_STR

GSS PLL Status Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

GP_STR GP_STR read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPRDY

GPRDY : GDC PLL status bit
bits : 0 - -1 (0 bit)
access : read-only


GPINT_ENR

GSS PLL Interrupt Enable Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPINT_ENR GPINT_ENR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPCSE

GPCSE : PLL oscillation stabilization wait completion interrupt enable bit
bits : 0 - -1 (0 bit)
access : read-write


GPINT_CLR

GSS PLL Interrupt Clear Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPINT_CLR GPINT_CLR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPCSC

GPCSC : GDC PLL oscillation stabilization wait completion interrupt clear bit
bits : 0 - -1 (0 bit)
access : read-write


GPINT_STR

GSS PLL Status Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

GPINT_STR GPINT_STR read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPCSI

GPCSI : GDC PLL oscillation stabilization wait completion interrupt status bit
bits : 0 - -1 (0 bit)
access : read-only


GCSR

GSS Clock Select Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GCSR GCSR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ASEL ACG PSEL PCG

ASEL : Reference clock for the GDC clock selection bits
bits : 0 - 0 (1 bit)
access : read-write

ACG : Clock gating for Reference clock for GDC clock setting bit
bits : 4 - 3 (0 bit)
access : read-write

PSEL : Peripheral clock for the GDC Sub system selection bit
bits : 8 - 7 (0 bit)
access : read-write

PCG : HCLK Clock gating for Reference clock for Peripherals setting bit
bits : 12 - 11 (0 bit)
access : read-write


GRCR

GSS Reset Control Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GRCR GRCR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RSTEN

RSTEN : Software reset for the GDC Sub system setting bit
bits : 0 - -1 (0 bit)
access : read-write


GMCR

GSS Mode Control Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GMCR GMCR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TEN

TEN : PLL oscillation under case of TIMER mode control bit
bits : 0 - -1 (0 bit)
access : read-write


GPCR1

GSS PLL Control Register 1
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPCR1 GPCR1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPLLEN GPINC

GPLLEN : GDC PLL enable/disable setting bit
bits : 0 - -1 (0 bit)
access : read-write

GPINC : GDC PLL input clock selection bit
bits : 1 - 0 (0 bit)
access : read-write


GPCR2

GSS PLL Control Register 2
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPCR2 GPCR2 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPOWT

GPOWT : PLL clock stabilization wait time set up bits
bits : 0 - 1 (2 bit)
access : read-write


GPCR3

GSS PLL Control Register 3
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

GPCR3 GPCR3 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GPLLK

GPLLK : PLL input clock frequency division ratio setting bits
bits : 0 - 3 (4 bit)
access : read-write



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.