\n
address_offset : 0x0 Bytes (0x0)
size : 0x14 byte (0x0)
mem_usage : registers
protection : not protected
Channel Data Shadow
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TCHDATA : Target Channel Data Value
bits : 0 - 10 (11 bit)
access : read-write
Channel Data
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHDATA : Channel Data Value
bits : 0 - 10 (11 bit)
access : read-only
Channel Configuration
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DEN : Data Value Enable
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : value1
Channel data values are irgnored
#1 : value2
Channel data values are processed
End of enumeration elements list.
GEN : Gating Enable
bits : 8 - 7 (0 bit)
access : read-write
Enumeration:
#0 : value1
Gating function is disabled, the input signal (DAC.INy) has no effect
#1 : value2
Gating function is enabled, the output gating signal is DAC.INy
End of enumeration elements list.
WEN : Flicker Watchdog Enable
bits : 9 - 8 (0 bit)
access : read-write
Enumeration:
#0 : value1
The flicker watchdog is not used
#1 : value2
The flicker watchdog is active and limits the number of consecutive zeroes at the sigma-delta modulator output according to GLOBCON.WDMBN
End of enumeration elements list.
RAMP_PS : Ramp Clock Prescaler
bits : 16 - 24 (9 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.