\n
address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection : not protected
SCU Raw Service Request Status
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRWARN : WDT pre-warning Event Status Before Masking
bits : 0 - -1 (0 bit)
access : read-only
PI : RTC Raw Periodic Event Status Before Masking
bits : 1 - 0 (0 bit)
access : read-only
AI : RTC Raw Alarm Event Status Before Masking
bits : 2 - 1 (0 bit)
access : read-only
VDDPI : VDDP pre-warning Event Status Before Masking
bits : 3 - 2 (0 bit)
access : read-only
ACMP0I : Analog Comparator 0 Event Status Before Masking
bits : 4 - 3 (0 bit)
access : read-only
ACMP1I : Analog Comparator 1 Event Status Before Masking
bits : 5 - 4 (0 bit)
access : read-only
ACMP2I : Analog Comparator 2 Event Status Before Masking
bits : 6 - 5 (0 bit)
access : read-only
VDROPI : VDROP Event Status Before Masking
bits : 7 - 6 (0 bit)
access : read-only
ORC0I : Out of Range Comparator X Event Status Before Masking
bits : 8 - 7 (0 bit)
access : read-only
ORC1I : Out of Range Comparator X Event Status Before Masking
bits : 9 - 8 (0 bit)
access : read-only
ORC2I : Out of Range Comparator X Event Status Before Masking
bits : 10 - 9 (0 bit)
access : read-only
ORC3I : Out of Range Comparator X Event Status Before Masking
bits : 11 - 10 (0 bit)
access : read-only
ORC4I : Out of Range Comparator X Event Status Before Masking
bits : 12 - 11 (0 bit)
access : read-only
ORC5I : Out of Range Comparator X Event Status Before Masking
bits : 13 - 12 (0 bit)
access : read-only
ORC6I : Out of Range Comparator X Event Status Before Masking
bits : 14 - 13 (0 bit)
access : read-only
ORC7I : Out of Range Comparator X Event Status Before Masking
bits : 15 - 14 (0 bit)
access : read-only
LOCI : Loss of Clock Event Status Before Masking
bits : 16 - 15 (0 bit)
access : read-only
PESRAMI : 16kbytes SRAM Parity Error Event Status Before Masking
bits : 17 - 16 (0 bit)
access : read-only
PEU0I : USIC0 SRAM Parity Error Event Status Before Masking
bits : 18 - 17 (0 bit)
access : read-only
FLECC2I : Flash Double Bit ECC Event Status Before Masking
bits : 19 - 18 (0 bit)
access : read-only
FLCMPLTI : Flash Operation Complete Event Status Before Masking
bits : 20 - 19 (0 bit)
access : read-only
VCLIPI : VCLIP Event Status Before Masking
bits : 21 - 20 (0 bit)
access : read-only
SBYCLKFI : Standby Clock Failure Event Status Before Masking
bits : 22 - 21 (0 bit)
access : read-only
RTC_CTR : RTC CTR Mirror Register Update Status Before Masking
bits : 24 - 23 (0 bit)
access : read-only
RTC_ATIM0 : RTC ATIM0 Mirror Register Update Status Before Masking
bits : 25 - 24 (0 bit)
access : read-only
RTC_ATIM1 : RTC ATIM1 Mirror Register Update Status Before Masking
bits : 26 - 25 (0 bit)
access : read-only
RTC_TIM0 : RTC TIM0 Mirror Register Update Before Masking
bits : 27 - 26 (0 bit)
access : read-only
RTC_TIM1 : RTC TIM1 Mirror Register Update Status Before Masking
bits : 28 - 27 (0 bit)
access : read-only
TSE_DONE : TSE Measurement Done Event Status Before Masking
bits : 29 - 28 (0 bit)
access : read-only
TSE_HIGH : TSE Compare High Temperature Event Status Before Masking
bits : 30 - 29 (0 bit)
access : read-only
TSE_LOW : TSE Compare Low Temperature Event Status Before Masking
bits : 31 - 30 (0 bit)
access : read-only
SCU Service Request Mask
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRWARN : WDT pre-warning Interrupt Mask
bits : 0 - -1 (0 bit)
access : read-write
VDDPI : VDDP pre-warning Interrupt Mask
bits : 3 - 2 (0 bit)
access : read-write
ACMP0I : Analog Comparator 0 Interrupt Mask
bits : 4 - 3 (0 bit)
access : read-write
ACMP1I : Analog Comparator 1 Interrupt Mask
bits : 5 - 4 (0 bit)
access : read-write
ACMP2I : Analog Comparator 2 Interrupt Mask
bits : 6 - 5 (0 bit)
access : read-write
VDROPI : VDROP Interrupt Mask
bits : 7 - 6 (0 bit)
access : read-write
ORC0I : Out of Range Comparator X Interrupt Mask
bits : 8 - 7 (0 bit)
access : read-write
ORC1I : Out of Range Comparator X Interrupt Mask
bits : 9 - 8 (0 bit)
access : read-write
ORC2I : Out of Range Comparator X Interrupt Mask
bits : 10 - 9 (0 bit)
access : read-write
ORC3I : Out of Range Comparator X Interrupt Mask
bits : 11 - 10 (0 bit)
access : read-write
ORC4I : Out of Range Comparator X Interrupt Mask
bits : 12 - 11 (0 bit)
access : read-write
ORC5I : Out of Range Comparator X Interrupt Mask
bits : 13 - 12 (0 bit)
access : read-write
ORC6I : Out of Range Comparator X Interrupt Mask
bits : 14 - 13 (0 bit)
access : read-write
ORC7I : Out of Range Comparator X Interrupt Mask
bits : 15 - 14 (0 bit)
access : read-write
LOCI : Loss of Clock Interrupt Mask
bits : 16 - 15 (0 bit)
access : read-write
PESRAMI : 16kbytes SRAM Parity Error Interrupt Mask
bits : 17 - 16 (0 bit)
access : read-write
PEU0I : USIC0 SRAM Parity Error Interrupt Mask
bits : 18 - 17 (0 bit)
access : read-write
FLECC2I : Flash Double Bit ECC Interrupt Mask
bits : 19 - 18 (0 bit)
access : read-write
VCLIPI : VCLIP Interrupt Mask
bits : 21 - 20 (0 bit)
access : read-write
SBYCLKFI : Standby Clock Failure Interrupt Mask
bits : 22 - 21 (0 bit)
access : read-write
RTC_CTR : RTC CTR Mirror Register Update Mask
bits : 24 - 23 (0 bit)
access : read-write
RTC_ATIM0 : RTC ATIM0 Mirror Register Update Mask
bits : 25 - 24 (0 bit)
access : read-write
RTC_ATIM1 : RTC ATIM1 Mirror Register Update Mask
bits : 26 - 25 (0 bit)
access : read-write
RTC_TIM0 : RTC TIM0 Mirror Register Update Mask
bits : 27 - 26 (0 bit)
access : read-write
RTC_TIM1 : RTC TIM1 Mirror Register Update Mask
bits : 28 - 27 (0 bit)
access : read-write
TSE_DONE : TSE Measurement Done Interrupt Mask
bits : 29 - 28 (0 bit)
access : read-write
TSE_HIGH : TSE Compare High Temperature Interrupt Mask
bits : 30 - 29 (0 bit)
access : read-write
TSE_LOW : TSE Compare Low Temperature Interrupt Mask
bits : 31 - 30 (0 bit)
access : read-write
SCU Service Request Clear
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRWARN : WDT pre-warning Interrupt Clear
bits : 0 - -1 (0 bit)
access : write-only
PI : RTC Periodic Interrupt Clear
bits : 1 - 0 (0 bit)
access : write-only
AI : RTC Alarm Interrupt Clear
bits : 2 - 1 (0 bit)
access : write-only
VDDPI : VDDP pre-warning Interrupt Clear
bits : 3 - 2 (0 bit)
access : write-only
ACMP0I : Analog Comparator 0 Interrupt Clear
bits : 4 - 3 (0 bit)
access : write-only
ACMP1I : Analog Comparator 1 Interrupt Clear
bits : 5 - 4 (0 bit)
access : write-only
ACMP2I : Analog Comparator 2 Interrupt Clear
bits : 6 - 5 (0 bit)
access : write-only
VDROPI : VDROP Interrupt Clear
bits : 7 - 6 (0 bit)
access : write-only
ORC0I : Out of Range Comparator X Interrupt Clear
bits : 8 - 7 (0 bit)
access : write-only
ORC1I : Out of Range Comparator X Interrupt Clear
bits : 9 - 8 (0 bit)
access : write-only
ORC2I : Out of Range Comparator X Interrupt Clear
bits : 10 - 9 (0 bit)
access : write-only
ORC3I : Out of Range Comparator X Interrupt Clear
bits : 11 - 10 (0 bit)
access : write-only
ORC4I : Out of Range Comparator X Interrupt Clear
bits : 12 - 11 (0 bit)
access : write-only
ORC5I : Out of Range Comparator X Interrupt Clear
bits : 13 - 12 (0 bit)
access : write-only
ORC6I : Out of Range Comparator X Interrupt Clear
bits : 14 - 13 (0 bit)
access : write-only
ORC7I : Out of Range Comparator X Interrupt Clear
bits : 15 - 14 (0 bit)
access : write-only
LOCI : Loss of Clock Interrupt Clear
bits : 16 - 15 (0 bit)
access : write-only
PESRAMI : 16kbytes SRAM Parity Error Interrupt Clear
bits : 17 - 16 (0 bit)
access : write-only
PEU0I : USIC0 SRAM Parity Error Interrupt Clear
bits : 18 - 17 (0 bit)
access : write-only
FLECC2I : Flash Double Bit ECC Interrupt Clear
bits : 19 - 18 (0 bit)
access : write-only
FLCMPLTI : Flash Operation Complete Interrupt Clear
bits : 20 - 19 (0 bit)
access : write-only
VCLIPI : VCLIP Interrupt Clear
bits : 21 - 20 (0 bit)
access : write-only
SBYCLKFI : Standby Clock Failure Interrupt Clear
bits : 22 - 21 (0 bit)
access : write-only
RTC_CTR : RTC CTR Mirror Register Update Clear
bits : 24 - 23 (0 bit)
access : write-only
RTC_ATIM0 : RTC ATIM0 Mirror Register Update Clear
bits : 25 - 24 (0 bit)
access : write-only
RTC_ATIM1 : RTC ATIM1 Mirror Register Update Clear
bits : 26 - 25 (0 bit)
access : write-only
RTC_TIM0 : RTC TIM0 Mirror Register Update Clear
bits : 27 - 26 (0 bit)
access : write-only
RTC_TIM1 : RTC TIM1 Mirror Register Update Clear
bits : 28 - 27 (0 bit)
access : write-only
TSE_DONE : TSE Measurement Done Interrupt Clear
bits : 29 - 28 (0 bit)
access : write-only
TSE_HIGH : TSE Compare High Temperature Interrupt Clear
bits : 30 - 29 (0 bit)
access : write-only
TSE_LOW : TSE Compare Low Temperature Interrupt Clear
bits : 31 - 30 (0 bit)
access : write-only
SCU Service Request Set
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRWARN : WDT pre-warning Interrupt Set
bits : 0 - -1 (0 bit)
access : write-only
PI : RTC Periodic Interrupt Set
bits : 1 - 0 (0 bit)
access : write-only
AI : RTC Alarm Interrupt Set
bits : 2 - 1 (0 bit)
access : write-only
VDDPI : VDDP pre-warning Interrupt Set
bits : 3 - 2 (0 bit)
access : write-only
ACMP0I : Analog Comparator 0 Interrupt Set
bits : 4 - 3 (0 bit)
access : write-only
ACMP1I : Analog Comparator 1 Interrupt Set
bits : 5 - 4 (0 bit)
access : write-only
ACMP2I : Analog Comparator 2 Interrupt Set
bits : 6 - 5 (0 bit)
access : write-only
VDROPI : VDROP Interrupt Set
bits : 7 - 6 (0 bit)
access : write-only
ORC0I : Out of Range Comparator X Interrupt Set
bits : 8 - 7 (0 bit)
access : write-only
ORC1I : Out of Range Comparator X Interrupt Set
bits : 9 - 8 (0 bit)
access : write-only
ORC2I : Out of Range Comparator X Interrupt Set
bits : 10 - 9 (0 bit)
access : write-only
ORC3I : Out of Range Comparator X Interrupt Set
bits : 11 - 10 (0 bit)
access : write-only
ORC4I : Out of Range Comparator X Interrupt Set
bits : 12 - 11 (0 bit)
access : write-only
ORC5I : Out of Range Comparator X Interrupt Set
bits : 13 - 12 (0 bit)
access : write-only
ORC6I : Out of Range Comparator X Interrupt Set
bits : 14 - 13 (0 bit)
access : write-only
ORC7I : Out of Range Comparator X Interrupt Set
bits : 15 - 14 (0 bit)
access : write-only
LOCI : Loss of Clock Interrupt Set
bits : 16 - 15 (0 bit)
access : write-only
PESRAMI : 16kbytes SRAM Parity Error Interrupt Set
bits : 17 - 16 (0 bit)
access : write-only
PEU0I : USIC0 SRAM Parity Error Interrupt Set
bits : 18 - 17 (0 bit)
access : write-only
FLECC2I : Flash Double Bit ECC Interrupt Set
bits : 19 - 18 (0 bit)
access : write-only
FLCMPLTI : Flash Operation Complete Interrupt Set
bits : 20 - 19 (0 bit)
access : write-only
VCLIPI : VCLIP Interrupt Set
bits : 21 - 20 (0 bit)
access : write-only
SBYCLKFI : Standby Clock Failure Interrupt Set
bits : 22 - 21 (0 bit)
access : write-only
RTC_CTR : RTC CTR Mirror Register Update Set
bits : 24 - 23 (0 bit)
access : write-only
RTC_ATIM0 : RTC ATIM0 Mirror Register Update Set
bits : 25 - 24 (0 bit)
access : write-only
RTC_ATIM1 : RTC ATIM1 Mirror Register Update Set
bits : 26 - 25 (0 bit)
access : write-only
RTC_TIM0 : RTC TIM0 Mirror Register Update Set
bits : 27 - 26 (0 bit)
access : write-only
RTC_TIM1 : RTC TIM1 Mirror Register Update Set
bits : 28 - 27 (0 bit)
access : write-only
TSE_DONE : TSE Measurement Done Interrupt Set
bits : 29 - 28 (0 bit)
access : write-only
TSE_HIGH : TSE Compare High Temperature Interrupt Set
bits : 30 - 29 (0 bit)
access : write-only
TSE_LOW : TSE Compare Low Temperature Interrupt Set
bits : 31 - 30 (0 bit)
access : write-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.