\n
address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection : not protected
Debug System ROM ID Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MANUFID : Manufactory Identity
bits : 1 - 10 (10 bit)
access : read-only
PARTNO : Part Number
bits : 12 - 26 (15 bit)
access : read-only
VERSION : Product version
bits : 28 - 30 (3 bit)
access : read-only
SSW Register 0
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DAT : SSW Data
bits : 0 - 30 (31 bit)
access : read-write
Password Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MODE : Bit Protection Scheme Control Bits
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#00 : value1
Scheme disabled - direct access to the protected bits is allowed.
#11 : value2
Scheme enabled - the bit field PASS has to be written with the passwords to open and close the access to the protected bits. (Default)
End of enumeration elements list.
PROTS : Bit Protection Signal Status Bit
bits : 2 - 1 (0 bit)
access : read-only
Enumeration:
#0 : value1
Software is able to write to all protected bits.
#1 : value2
Software is unable to write to any of the protected bits.
End of enumeration elements list.
PASS : Password Bits
bits : 3 - 6 (4 bit)
access : write-only
Enumeration:
#11000 : value1
Enables writing of the bit field MODE.
#10011 : value2
Opens access to writing of all protected bits.
#10101 : value3
Closes access to writing of all protected bits.
End of enumeration elements list.
CCU Control Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GSC40 : Global Start Control CCU40
bits : 0 - -1 (0 bit)
access : read-write
GSC41 : Global Start Control CCU41
bits : 1 - 0 (0 bit)
access : read-write
GSC80 : Global Start Control CCU80
bits : 8 - 7 (0 bit)
access : read-write
GSC81 : Global Start Control CCU81
bits : 9 - 8 (0 bit)
access : read-write
Chip ID Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IDCHIP : CHIP ID
bits : 0 - 30 (31 bit)
access : read-only
Mirror Update Status Register
address_offset : 0x48 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RTC_CTR : RTC CTR Mirror Register Update Status
bits : 0 - -1 (0 bit)
access : read-only
RTC_ATIM0 : RTC ATIM0 Mirror Register Update Status
bits : 1 - 0 (0 bit)
access : read-only
RTC_ATIM1 : RTC ATIM1 Mirror Register Update Status
bits : 2 - 1 (0 bit)
access : read-only
RTC_TIM0 : RTC TIM0 Mirror Register Update Status
bits : 3 - 2 (0 bit)
access : read-only
RTC_TIM1 : RTC TIM1 Mirror Register Update Status
bits : 4 - 3 (0 bit)
access : read-only
Parity Memory Test Select Register
address_offset : 0x54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MTENS : Parity Test Enable Control for 16kbytes SRAM
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : value1
standard operation
#1 : value2
generate an inverted parity bit during a write operation
End of enumeration elements list.
Prefetch Unit Control Register
address_offset : 0x68 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PFUBYP : Prefetch Unit (PFU) Bypass
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : value1
PFU not bypass
#1 : value2
PFU bypass
End of enumeration elements list.
Interrupt Control Register 0
address_offset : 0x6C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTSEL0 : Interrupt Source Select for Node 0
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL1 : Interrupt Source Select for Node 1
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL2 : Interrupt Source Select for Node 2
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL3 : Interrupt Source Select for Node 3
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL4 : Interrupt Source Select for Node 4
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL5 : Interrupt Source Select for Node 5
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL6 : Interrupt Source Select for Node 6
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL7 : Interrupt Source Select for Node 7
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL8 : Interrupt Source Select for Node 8
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL9 : Interrupt Source Select for Node 9
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL10 : Interrupt Source Select for Node 10
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL11 : Interrupt Source Select for Node 11
bits : 22 - 22 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL12 : Interrupt Source Select for Node 12
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL13 : Interrupt Source Select for Node 13
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL14 : Interrupt Source Select for Node 14
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL15 : Interrupt Source Select for Node 15
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
Interrupt Control Register 1
address_offset : 0x70 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTSEL16 : Interrupt Source Select for Node 16
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL17 : Interrupt Source Select for Node 17
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL18 : Interrupt Source Select for Node 18
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL19 : Interrupt Source Select for Node 19
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL20 : Interrupt Source Select for Node 20
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL21 : Interrupt Source Select for Node 21
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL22 : Interrupt Source Select for Node 22
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL23 : Interrupt Source Select for Node 23
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL24 : Interrupt Source Select for Node 24
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL25 : Interrupt Source Select for Node 25
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL26 : Interrupt Source Select for Node 26
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL27 : Interrupt Source Select for Node 27
bits : 22 - 22 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL28 : Interrupt Source Select for Node 28
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL29 : Interrupt Source Select for Node 29
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL30 : Interrupt Source Select for Node 30
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
INTSEL31 : Interrupt Source Select for Node 31
bits : 30 - 30 (1 bit)
access : read-write
Enumeration:
#00 : value1
Select source A
#01 : value2
Select source B
#10 : value3
Select source C
#11 : value4
Select source A or B
End of enumeration elements list.
Startup Status Register
address_offset : 0x74 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
HWCON : HW Configuration
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#00 : value1
User productive mode (UPM)
#01 : value2
ASC BSL
#10 : value3
Alternate Boot Mode (ABM)
#11 : value4
CAN BSL
End of enumeration elements list.
SCU Module ID Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MOD_REV : Module Revision Number
bits : 0 - 6 (7 bit)
access : read-only
MOD_TYPE : Module Type
bits : 8 - 14 (7 bit)
access : read-only
MOD_NUMBER : Module Number Value
bits : 16 - 30 (15 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.