\n
address_offset : 0x0 Bytes (0x0)
size : 0x200 byte (0x0)
mem_usage : registers
protection : not protected
CAN Clock Control Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DISR : Module Disable Request Bit
bits : 0 - -1 (0 bit)
access : read-write
DISS : Module Disable Status Bit
bits : 1 - 0 (0 bit)
access : read-only
EDIS : Sleep Mode Enable Control
bits : 3 - 2 (0 bit)
access : read-write
List Register
address_offset : 0x106C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
List Register
address_offset : 0x11A4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
List Register
address_offset : 0x12E0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Index Mask Register
address_offset : 0x1C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IM : Message Index Mask
bits : 0 - 30 (31 bit)
access : read-write
Panel Control Register
address_offset : 0x1C4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PANCMD : Panel Command
bits : 0 - 6 (7 bit)
access : read-write
BUSY : Panel Busy Flag
bits : 8 - 7 (0 bit)
access : read-only
Enumeration:
#0 : value1
Panel has finished command and is ready to accept a new command.
#1 : value2
Panel operation is in progress.
End of enumeration elements list.
RBUSY : Result Busy Flag
bits : 9 - 8 (0 bit)
access : read-only
Enumeration:
#0 : value1
No update of PANAR1 and PANAR2 is scheduled by the list controller.
#1 : value2
A list command is running (BUSY = 1) that will write results to PANAR1 and PANAR2, but the results are not yet available.
End of enumeration elements list.
PANAR1 : Panel Argument 1
bits : 16 - 22 (7 bit)
access : read-write
PANAR2 : Panel Argument 2
bits : 24 - 30 (7 bit)
access : read-write
Module Control Register
address_offset : 0x1C8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CLKSEL : Baud Rate Logic Clock Select
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : value1
No clock supplied
#0001 : value2
fPERIPH
#0010 : value3
fOHP
#0100 : value4
hard wired to 0
#1000 : value5
hard wired to 0
End of enumeration elements list.
MPSEL : Message Pending Selector
bits : 12 - 14 (3 bit)
access : read-write
Module Interrupt Trigger Register
address_offset : 0x1CC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
IT : Interrupt Trigger
bits : 0 - 6 (7 bit)
access : write-only
List Register
address_offset : 0x200 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Pending Register
address_offset : 0x280 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
Message Index Register
address_offset : 0x300 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
List Register
address_offset : 0x304 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Pending Register
address_offset : 0x3C4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
List Register
address_offset : 0x40C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Index Register
address_offset : 0x484 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
Message Pending Register
address_offset : 0x50C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
List Register
address_offset : 0x518 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Index Register
address_offset : 0x60C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
List Register
address_offset : 0x628 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Pending Register
address_offset : 0x658 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
List Register
address_offset : 0x73C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Index Register
address_offset : 0x798 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
Message Pending Register
address_offset : 0x7A8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
Module Identification Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MOD_REV : Module Revision Number
bits : 0 - 6 (7 bit)
access : read-only
MOD_TYPE : Module Type
bits : 8 - 14 (7 bit)
access : read-only
Enumeration:
0xC0 : value1
Define the module as a 32-bit module.
End of enumeration elements list.
MOD_NUMBER : Module Number Value
bits : 16 - 30 (15 bit)
access : read-only
List Register
address_offset : 0x854 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Pending Register
address_offset : 0x8FC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
Message Index Register
address_offset : 0x928 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
List Register
address_offset : 0x970 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Pending Register
address_offset : 0xA54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
List Register
address_offset : 0xA90 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Index Register
address_offset : 0xABC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
Message Pending Register
address_offset : 0xBB0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PND : Message Pending
bits : 0 - 30 (31 bit)
access : read-write
List Register
address_offset : 0xBB4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
CAN Fractional Divider Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
STEP : Step Value
bits : 0 - 8 (9 bit)
access : read-write
DM : Divider Mode
bits : 14 - 14 (1 bit)
access : read-write
Message Index Register
address_offset : 0xC54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
List Register
address_offset : 0xCDC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Message Index Register
address_offset : 0xDF0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INDEX : Message Pending Index
bits : 0 - 4 (5 bit)
access : read-only
List Register
address_offset : 0xE08 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
List Register
address_offset : 0xF38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEGIN : List Begin
bits : 0 - 6 (7 bit)
access : read-only
END : List End
bits : 8 - 14 (7 bit)
access : read-only
SIZE : List Size
bits : 16 - 22 (7 bit)
access : read-only
EMPTY : List Empty Indication
bits : 24 - 23 (0 bit)
access : read-only
Enumeration:
#0 : value1
At least one message object is allocated to list i.
#1 : value2
No message object is allocated to the list i. List i is empty.
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.