\n
address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection : not protected
Global Enable/Disable Controls for All Pulse Trains
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
pt0 : Enable/Disable control for PT0
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt1 : Enable/Disable control for PT1
bits : 1 - 2 (2 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt2 : Enable/Disable control for PT2
bits : 2 - 4 (3 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt3 : Enable/Disable control for PT3
bits : 3 - 6 (4 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt4 : Enable/Disable control for PT4
bits : 4 - 8 (5 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt5 : Enable/Disable control for PT5
bits : 5 - 10 (6 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt6 : Enable/Disable control for PT6
bits : 6 - 12 (7 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt7 : Enable/Disable control for PT7
bits : 7 - 14 (8 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt8 : Enable/Disable control for PT8
bits : 8 - 16 (9 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt9 : Enable/Disable control for PT9
bits : 9 - 18 (10 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt10 : Enable/Disable control for PT10
bits : 10 - 20 (11 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt11 : Enable/Disable control for PT11
bits : 11 - 22 (12 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt12 : Enable/Disable control for PT12
bits : 12 - 24 (13 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt13 : Enable/Disable control for PT13
bits : 13 - 26 (14 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt14 : Enable/Disable control for PT14
bits : 14 - 28 (15 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt15 : Enable/Disable control for PT15
bits : 15 - 30 (16 bit)
access : read-write
Enumeration:
End of enumeration elements list.
Global Resync (All Pulse Trains) Control
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
pt0 : Resync control for PT0
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt1 : Resync control for PT1
bits : 1 - 2 (2 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt2 : Resync control for PT2
bits : 2 - 4 (3 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt3 : Resync control for PT3
bits : 3 - 6 (4 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt4 : Resync control for PT4
bits : 4 - 8 (5 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt5 : Resync control for PT5
bits : 5 - 10 (6 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt6 : Resync control for PT6
bits : 6 - 12 (7 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt7 : Resync control for PT7
bits : 7 - 14 (8 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt8 : Resync control for PT8
bits : 8 - 16 (9 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt9 : Resync control for PT9
bits : 9 - 18 (10 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt10 : Resync control for PT10
bits : 10 - 20 (11 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt11 : Resync control for PT11
bits : 11 - 22 (12 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt12 : Resync control for PT12
bits : 12 - 24 (13 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt13 : Resync control for PT13
bits : 13 - 26 (14 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt14 : Resync control for PT14
bits : 14 - 28 (15 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt15 : Resync control for PT15
bits : 15 - 30 (16 bit)
access : read-write
Enumeration:
End of enumeration elements list.
Pulse Train Interrupt Flags
address_offset : 0x8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
pt0 : Pulse Train 0 Stopped Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt1 : Pulse Train 1 Stopped Interrupt Flag
bits : 1 - 2 (2 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt2 : Pulse Train 2 Stopped Interrupt Flag
bits : 2 - 4 (3 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt3 : Pulse Train 3 Stopped Interrupt Flag
bits : 3 - 6 (4 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt4 : Pulse Train 4 Stopped Interrupt Flag
bits : 4 - 8 (5 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt5 : Pulse Train 5 Stopped Interrupt Flag
bits : 5 - 10 (6 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt6 : Pulse Train 6 Stopped Interrupt Flag
bits : 6 - 12 (7 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt7 : Pulse Train 7 Stopped Interrupt Flag
bits : 7 - 14 (8 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt8 : Pulse Train 8 Stopped Interrupt Flag
bits : 8 - 16 (9 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt9 : Pulse Train 9 Stopped Interrupt Flag
bits : 9 - 18 (10 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt10 : Pulse Train 10 Stopped Interrupt Flag
bits : 10 - 20 (11 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt11 : Pulse Train 11 Stopped Interrupt Flag
bits : 11 - 22 (12 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt12 : Pulse Train 12 Stopped Interrupt Flag
bits : 12 - 24 (13 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt13 : Pulse Train 13 Stopped Interrupt Flag
bits : 13 - 26 (14 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt14 : Pulse Train 14 Stopped Interrupt Flag
bits : 14 - 28 (15 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt15 : Pulse Train 15 Stopped Interrupt Flag
bits : 15 - 30 (16 bit)
access : read-write
Enumeration:
End of enumeration elements list.
Pulse Train Interrupt Enable/Disable
address_offset : 0xC Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
pt0 : Pulse Train 0 Stopped Interrupt Enable/Disable
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt1 : Pulse Train 1 Stopped Interrupt Enable/Disable
bits : 1 - 2 (2 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt2 : Pulse Train 2 Stopped Interrupt Enable/Disable
bits : 2 - 4 (3 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt3 : Pulse Train 3 Stopped Interrupt Enable/Disable
bits : 3 - 6 (4 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt4 : Pulse Train 4 Stopped Interrupt Enable/Disable
bits : 4 - 8 (5 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt5 : Pulse Train 5 Stopped Interrupt Enable/Disable
bits : 5 - 10 (6 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt6 : Pulse Train 6 Stopped Interrupt Enable/Disable
bits : 6 - 12 (7 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt7 : Pulse Train 7 Stopped Interrupt Enable/Disable
bits : 7 - 14 (8 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt8 : Pulse Train 8 Stopped Interrupt Enable/Disable
bits : 8 - 16 (9 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt9 : Pulse Train 9 Stopped Interrupt Enable/Disable
bits : 9 - 18 (10 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt10 : Pulse Train 10 Stopped Interrupt Enable/Disable
bits : 10 - 20 (11 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt11 : Pulse Train 11 Stopped Interrupt Enable/Disable
bits : 11 - 22 (12 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt12 : Pulse Train 12 Stopped Interrupt Enable/Disable
bits : 12 - 24 (13 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt13 : Pulse Train 13 Stopped Interrupt Enable/Disable
bits : 13 - 26 (14 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt14 : Pulse Train 14 Stopped Interrupt Enable/Disable
bits : 14 - 28 (15 bit)
access : read-write
Enumeration:
End of enumeration elements list.
pt15 : Pulse Train 15 Stopped Interrupt Enable/Disable
bits : 15 - 30 (16 bit)
access : read-write
Enumeration:
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.