\n

SEMA

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

SEMAPHORES[0]

SEMAPHORES0

SEMAPHORES4

status

SEMAPHORES5

SEMAPHORES[3]

SEMAPHORES6

SEMAPHORES7

SEMAPHORES[4]

SEMAPHORES[5]

SEMAPHORES[1]

SEMAPHORES1

SEMAPHORES[6]

SEMAPHORES[7]

SEMAPHORES2

SEMAPHORES[2]

SEMAPHORES3


SEMAPHORES[0]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[0] SEMAPHORES[0] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES0

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES0 SEMAPHORES0 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES4

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES4 SEMAPHORES4 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


status

Semaphore status bits. 0 indicates the semaphore is free, 1 indicates taken.
address_offset : 0x100 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

status status read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 STATUS

STATUS :
bits : 0 - 7 (8 bit)


SEMAPHORES5

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES5 SEMAPHORES5 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES[3]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[3] SEMAPHORES[3] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES6

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES6 SEMAPHORES6 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES7

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES7 SEMAPHORES7 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES[4]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[4] SEMAPHORES[4] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES[5]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x3C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[5] SEMAPHORES[5] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES[1]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[1] SEMAPHORES[1] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES1

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES1 SEMAPHORES1 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES[6]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[6] SEMAPHORES[6] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES[7]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x70 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[7] SEMAPHORES[7] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES2

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES2 SEMAPHORES2 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES[2]

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES[2] SEMAPHORES[2] read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)


SEMAPHORES3

Read to test and set, returns prior value. Write 0 to clear semaphore.
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

SEMAPHORES3 SEMAPHORES3 read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sema

sema :
bits : 0 - 0 (1 bit)



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.