\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection : not protected
System Initialization Status Register.
address_offset : 0x0 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
MAGIC : Magic Word Validation. This bit is set by the system initialization block following power-up.
bits : 0 - 0 (1 bit)
access : read-only
Enumeration: ( read )
0 : magicNotSet
Magic word was not set (OTP has not been initialized properly).
1 : magicSet
Magic word was set (OTP contains valid settings).
End of enumeration elements list.
CRCERR : CRC Error Status. This bit is set by the system initialization block following power-up.
bits : 1 - 1 (1 bit)
access : read-only
Enumeration: ( read )
0 : noError
No CRC errors occurred during the read of the OTP memory block.
1 : error
A CRC error occurred while reading the OTP. The address of the failure location in the OTP memory is stored in the ERRADDR register.
End of enumeration elements list.
funcstat register.
address_offset : 0x100 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FPU : FPU Function.
bits : 0 - 0 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
USB : USB Device.
bits : 1 - 1 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
ADC : 10-bit Sigma Delta ADC.
bits : 2 - 2 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
XIP : XiP function.
bits : 3 - 3 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
PBM : PBM function.
bits : 4 - 4 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
HBC : HBC function.
bits : 5 - 5 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
SDHC : SDHC function.
bits : 6 - 6 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
SMPHR : SMPHR function.
bits : 7 - 7 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
SCACHE : System Cache function.
bits : 8 - 8 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
secfuncstat register.
address_offset : 0x104 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TRNG : TRNG function.
bits : 2 - 2 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
AES : AES function.
bits : 3 - 3 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
SHA : SHA function.
bits : 4 - 4 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
MAA : MAA function.
bits : 5 - 5 (1 bit)
Enumeration:
0 : no
None
1 : yes
None
End of enumeration elements list.
Read-only field set by the SIB block if a CRC error occurs during the read of the OTP memory. Contains the failing address in OTP memory (when CRCERR equals 1).
address_offset : 0x4 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
ERRADDR :
bits : 0 - 31 (32 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.