\n

DAC8

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x2 byte (0x0)
mem_usage : registers
protection : not protected

address_offset : 0x3 Bytes (0x0)
size : 0x1 byte (0x0)
mem_usage : registers
protection : not protected

Registers

DACS0

DACS1

DAM


DACS0

D/A Conversion Value Setting Register %s
address_offset : 0x0 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

DACS0 DACS0 read-write 0 1 2 3 4 5 6 7 Resets to 0 0 0 0 0 0 0 0 DACS

DACS : DACS D/A conversion store data note: When 8-bit D/A Converter output is selected as the reference input for the ACMPLP in the COMPSEL1 register, and ACMPLP operation is enabled (COMPMDR.CnENB = 1), changing the DACS[7:0] bits for the channel in use isprohibited.
bits : 0 - 6 (7 bit)
access : read-write


DACS1

D/A Conversion Value Setting Register %s
address_offset : 0x1 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

DACS1 DACS1 read-write 0 1 2 3 4 5 6 7 Resets to 0 0 0 0 0 0 0 0 DACS

DACS : DACS D/A conversion store data note: When 8-bit D/A Converter output is selected as the reference input for the ACMPLP in the COMPSEL1 register, and ACMPLP operation is enabled (COMPMDR.CnENB = 1), changing the DACS[7:0] bits for the channel in use isprohibited.
bits : 0 - 6 (7 bit)
access : read-write


DAM

D/A Converter Mode Register
address_offset : 0x3 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

DAM DAM read-write 0 1 2 3 4 5 6 7 Resets to 0 0 0 0 0 0 0 0 DACE0 DACE1 Reserved Reserved

DACE0 : D/A Operation Enable 0
bits : 4 - 3 (0 bit)
access : read-write

Enumeration:

#0 : 0

D/A conversion disabled for channel 0

#1 : 1

D/A conversion enabled for channel 0.

End of enumeration elements list.

DACE1 : D/A Operation Enable 1
bits : 5 - 4 (0 bit)
access : read-write

Enumeration:

#0 : 0

D/A conversion disabled for channel 1

#1 : 1

D/A conversion enabled for channel 1

End of enumeration elements list.

Reserved : These bits are read as 00. The write value should be 00.
bits : 6 - 6 (1 bit)
access : read-write

Reserved : These bits are read as 00. The write value should be 00.
bits : 6 - 6 (1 bit)
access : read-write



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.