Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x820 Bytes (0x0)
size : 0x39 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x200 Bytes (0x0)
size : 0x230 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x820 Bytes (0x0)
size : 0x39 byte (0x0)
mem_usage : registers
protection :
MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[14]-MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[14]-MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[14]-MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[14]-MB[13]-MB[12]-MB[11]-MB[10]-MB[9]-MB[8]-MB[7]-MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-D[7]
MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-ID
MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-DL
MB[6]-MB[5]-MB[4]-MB[3]-MB[2]-MB[1]-MB[0]-TS
Mailbox ID Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mask Register
address_offset : 0x100C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x1040 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x1040 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x1045 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x105D1 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x105D1 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x10E10 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x10E10 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox ID Register
address_offset : 0x11C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x11C4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x11CE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x1252 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mask Register
address_offset : 0x1418 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox ID Register
address_offset : 0x1440 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x1444 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x144E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x1462 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x1682 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x16D0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x16D4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x16DE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mask Register
address_offset : 0x1828 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x1861 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x1861 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x18B2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x1970 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x1974 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x197E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x1AF2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x1C20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x1C24 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x1C2E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mask Register
address_offset : 0x1C3C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox Data Register
address_offset : 0x1D42 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x1EE0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x1EE4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x1EEE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x1FA2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x200 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x204 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mask Register
address_offset : 0x2054 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x2083 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x2083 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x20E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x21B0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x21B4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x21BE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x2212 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mask Register
address_offset : 0x2470 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox ID Register
address_offset : 0x2490 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x2492 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox DLC Register
address_offset : 0x2494 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x249E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x2722 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x2780 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x2784 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x278E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x28A6 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x28A6 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x29C2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x2A80 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x2A84 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x2A8E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x2C72 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x2D90 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x2D94 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x2D9E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x2F32 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x30B0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x30B4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x30BE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x30CA Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x30CA Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x3202 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x33E0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x33E4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x33EE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x34E2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x3720 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x3724 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x372E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x37D2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x38EF Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x38EF Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox ID Register
address_offset : 0x3A70 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x3A74 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x3A7E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x3AD2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x3DD0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x3DD4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x3DDE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x3DE2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox DLC Register
address_offset : 0x4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
: others
Data length = 8 bytes
End of enumeration elements list.
Mask Register
address_offset : 0x400 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mask Register
address_offset : 0x404 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mask Register
address_offset : 0x408 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox Data Register
address_offset : 0x40C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mask Register
address_offset : 0x40C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox ID Register
address_offset : 0x410 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mask Register
address_offset : 0x410 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox Data Register
address_offset : 0x4102 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x4115 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x4115 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x414 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mask Register
address_offset : 0x414 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox ID Register
address_offset : 0x4140 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x4144 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x414E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mask Register
address_offset : 0x418 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mask Register
address_offset : 0x41C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox Timestamp Register
address_offset : 0x41E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
FIFO Received ID Compare Registers
address_offset : 0x420 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
FIFO Received ID Compare Registers
address_offset : 0x424 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mask Invalid Register
address_offset : 0x428 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MB0 : mailbox 0 Mask Invalid
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB1 : mailbox 1 Mask Invalid
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB2 : mailbox 2 Mask Invalid
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB3 : mailbox 3 Mask Invalid
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB4 : mailbox 4 Mask Invalid
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB5 : mailbox 5 Mask Invalid
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB6 : mailbox 6 Mask Invalid
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB7 : mailbox 7 Mask Invalid
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB8 : mailbox 8 Mask Invalid
bits : 8 - 7 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB9 : mailbox 9 Mask Invalid
bits : 9 - 8 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB10 : mailbox 10 Mask Invalid
bits : 10 - 9 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB11 : mailbox 11 Mask Invalid
bits : 11 - 10 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB12 : mailbox 12 Mask Invalid
bits : 12 - 11 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB13 : mailbox 13 Mask Invalid
bits : 13 - 12 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB14 : mailbox 14 Mask Invalid
bits : 14 - 13 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB15 : mailbox 15 Mask Invalid
bits : 15 - 14 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB16 : mailbox 16 Mask Invalid
bits : 16 - 15 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB17 : mailbox 17 Mask Invalid
bits : 17 - 16 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB18 : mailbox 18 Mask Invalid
bits : 18 - 17 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB19 : mailbox 19 Mask Invalid
bits : 19 - 18 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB20 : mailbox 20 Mask Invalid
bits : 20 - 19 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB21 : mailbox 21 Mask Invalid
bits : 21 - 20 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB22 : mailbox 22 Mask Invalid
bits : 22 - 21 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB23 : mailbox 23 Mask Invalid
bits : 23 - 22 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB24 : mailbox 24 Mask Invalid
bits : 24 - 23 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB25 : mailbox 25 Mask Invalid
bits : 25 - 24 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB26 : mailbox 26 Mask Invalid
bits : 26 - 25 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB27 : mailbox 27 Mask Invalid
bits : 27 - 26 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB28 : mailbox 28 Mask Invalid
bits : 28 - 27 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB29 : mailbox 29 Mask Invalid
bits : 29 - 28 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB30 : mailbox 30 Mask Invalid
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
MB31 : mailbox 31 Mask Invalid
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Mask valid
#1 : 1
Mask invalid
End of enumeration elements list.
Mailbox Interrupt Enable Register
address_offset : 0x42C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MB0 : mailbox 0 Interrupt Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB1 : mailbox 1 Interrupt Enable
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB2 : mailbox 2 Interrupt Enable
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB3 : mailbox 3 Interrupt Enable
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB4 : mailbox 4 Interrupt Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB5 : mailbox 5 Interrupt Enable
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB6 : mailbox 6 Interrupt Enable
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB7 : mailbox 7 Interrupt Enable
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB8 : mailbox 8 Interrupt Enable
bits : 8 - 7 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB9 : mailbox 9 Interrupt Enable
bits : 9 - 8 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB10 : mailbox 10 Interrupt Enable
bits : 10 - 9 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB11 : mailbox 11 Interrupt Enable
bits : 11 - 10 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB12 : mailbox 12 Interrupt Enable
bits : 12 - 11 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB13 : mailbox 13 Interrupt Enable
bits : 13 - 12 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB14 : mailbox 14 Interrupt Enable
bits : 14 - 13 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB15 : mailbox 15 Interrupt Enable
bits : 15 - 14 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB16 : mailbox 16 Interrupt Enable
bits : 16 - 15 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB17 : mailbox 17 Interrupt Enable
bits : 17 - 16 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB18 : mailbox 18 Interrupt Enable
bits : 18 - 17 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB19 : mailbox 19 Interrupt Enable
bits : 19 - 18 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB20 : mailbox 20 Interrupt Enable
bits : 20 - 19 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB21 : mailbox 21 Interrupt Enable
bits : 21 - 20 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB22 : mailbox 22 Interrupt Enable
bits : 22 - 21 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB23 : mailbox 23 Interrupt Enable
bits : 23 - 22 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB24 : mailbox 24 Interrupt Enable
bits : 24 - 23 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB25 : mailbox 25 Interrupt Enable
bits : 25 - 24 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB26 : mailbox 26 Interrupt Enable
bits : 26 - 25 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB27 : mailbox 27 Interrupt Enable
bits : 27 - 26 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB28 : mailbox 28 Interrupt Enable
bits : 28 - 27 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB29 : mailbox 29 Interrupt Enable
bits : 29 - 28 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB30 : mailbox 30 Interrupt Enable
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB31 : mailbox 31 Interrupt Enable
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
Mailbox Interrupt Enable Register for FIFO Mailbox Mode
address_offset : 0x42C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
alternate_register : MIER
reset_Mask : 0x0
MB0 : mailbox 0 Interrupt Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB1 : mailbox 1 Interrupt Enable
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB2 : mailbox 2 Interrupt Enable
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB3 : mailbox 3 Interrupt Enable
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB4 : mailbox 4 Interrupt Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB5 : mailbox 5 Interrupt Enable
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB6 : mailbox 6 Interrupt Enable
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB7 : mailbox 7 Interrupt Enable
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB8 : mailbox 8 Interrupt Enable
bits : 8 - 7 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB9 : mailbox 9 Interrupt Enable
bits : 9 - 8 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB10 : mailbox 10 Interrupt Enable
bits : 10 - 9 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB11 : mailbox 11 Interrupt Enable
bits : 11 - 10 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB12 : mailbox 12 Interrupt Enable
bits : 12 - 11 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB13 : mailbox 13 Interrupt Enable
bits : 13 - 12 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB14 : mailbox 14 Interrupt Enable
bits : 14 - 13 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB15 : mailbox 15 Interrupt Enable
bits : 15 - 14 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB16 : mailbox 16 Interrupt Enable
bits : 16 - 15 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB17 : mailbox 17 Interrupt Enable
bits : 17 - 16 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB18 : mailbox 18 Interrupt Enable
bits : 18 - 17 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB19 : mailbox 19 Interrupt Enable
bits : 19 - 18 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB20 : mailbox 20 Interrupt Enable
bits : 20 - 19 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB21 : mailbox 21 Interrupt Enable
bits : 21 - 20 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB22 : mailbox 22 Interrupt Enable
bits : 22 - 21 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB23 : mailbox 23 Interrupt Enable
bits : 23 - 22 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB24 : Transmit FIFO Interrupt Enable
bits : 24 - 23 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB25 : Transmit FIFO Interrupt Generation Timing Control
bits : 25 - 24 (0 bit)
access : read-write
Enumeration:
#0 : 0
Every time transmission is completed
#1 : 1
When the transmit FIFO becomes empty due to completion of transmission
End of enumeration elements list.
MB28 : Receive FIFO Interrupt Enable
bits : 28 - 27 (0 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt disabled
#1 : 1
Interrupt enabled
End of enumeration elements list.
MB29 : Receive FIFO Interrupt Generation Timing Control
bits : 29 - 28 (0 bit)
access : read-write
Enumeration:
#0 : 0
Every time reception is completed
#1 : 1
When the receive FIFO becomes buffer warning by completion of reception
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x4432 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x44C0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x44C4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x44CE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x4772 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x4850 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x4854 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x485E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x493C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x493C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x4AC2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x4BF0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x4BF4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x4BFE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x4E22 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x4FA0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x4FA4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x4FAE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x5164 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x5164 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x5192 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x5360 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x5364 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x536E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x5512 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x5730 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x5734 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x573E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x58A2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x598D Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x598D Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox ID Register
address_offset : 0x5B10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x5B14 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x5B1E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x5C42 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox ID Register
address_offset : 0x5F00 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x5F04 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x5F0E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x5FF2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x6 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x613 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x61B7 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x61B7 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox ID Register
address_offset : 0x630 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x634 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x63B2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Timestamp Register
address_offset : 0x63E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x6782 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x69E2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x69E2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x6B62 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x6F52 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0x7 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x720E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x720E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x7A3B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x7A3B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x8 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mask Register
address_offset : 0x800 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox Data Register
address_offset : 0x81B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x820 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x820 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x821 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x821 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x822 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x822 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x823 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x823 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x824 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x824 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x825 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x825 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x826 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x826 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x8269 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x8269 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x827 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x827 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x828 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x828 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x829 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x829 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x82A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x82A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x82B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x82B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x82C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x82C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x82D Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x82D Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x82E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x82E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x82F Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x82F Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x830 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x830 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x831 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x831 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x832 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x832 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x833 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x833 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x834 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x834 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x835 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x835 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x836 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x836 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x837 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x837 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x838 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x838 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x839 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x839 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x83A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x83A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x83B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x83B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x83C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x83C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x83D Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x83D Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x83E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x83E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x83F Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x83F Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
FIFO Received ID Compare Registers
address_offset : 0x840 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Control Register
address_offset : 0x840 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MBM : CAN Mailbox Mode Select
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Normal mailbox mode
#1 : 1
FIFO mailbox mode
End of enumeration elements list.
IDFM : ID Format Mode Select
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#00 : 00
Standard ID mode.All mailboxes (including FIFO mailboxes) handle only standard Ids.
#01 : 01
Extended ID mode.All mailboxes (including FIFO mailboxes) handle only extended IDs.
#10 : 10
Mixed ID mode.All mailboxes (including FIFO mailboxes) handle both standard IDs and extended IDs. Standard IDs or extended IDs are specified by using the IDE bit in the corresponding mailbox in normal mailbox mode. In FIFO mailbox mode, the IDE bit in the corresponding mailbox is used for mailboxes [0] to [23], the IDE bits in FIDCR0 and FIDCR1 are used for the receive FIFO, and the IDE bit in mailbox [24] is used for the transmit FIFO.
#11 : 11
Do not use this combination
End of enumeration elements list.
MLM : Message Lost Mode Select
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Overwrite mode
#1 : 1
Overrun mode
End of enumeration elements list.
TPM : Transmission Priority Mode Select
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
ID priority transmit mode
#1 : 1
Mailbox number priority transmit mode
End of enumeration elements list.
TSRC : Time Stamp Counter Reset Command
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Nothing occurred
#1 : 1
Reset
End of enumeration elements list.
TSPS : Time Stamp Prescaler Select
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#00 : 00
Every bit time
#01 : 01
Every 2-bit time
#10 : 10
Every 4-bit time
#11 : 11
Every 8-bit time
End of enumeration elements list.
CANM : CAN Operating Mode Select
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#00 : 00
CAN operation mode
#01 : 01
CAN reset mode
#10 : 10
CAN halt mode
#11 : 11
CAN reset mode (forcible transition)
End of enumeration elements list.
SLPM : CAN Sleep Mode
bits : 10 - 9 (0 bit)
access : read-write
Enumeration:
#0 : 0
Other than CAN sleep mode
#1 : 1
CAN sleep mode
End of enumeration elements list.
BOM : Bus-Off Recovery Mode by a program request
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#00 : 00
Normal mode (ISO11898-1 compliant)
#01 : 01
Entry to CAN halt mode automatically at bus-off entry
#10 : 10
Entry to CAN halt mode automatically at bus-off end
#11 : 11
Entry to CAN halt mode (during bus-off recovery period)
End of enumeration elements list.
RBOC : Forcible Return From Bus-Off
bits : 13 - 12 (0 bit)
access : read-write
Enumeration:
#0 : 0
Nothing occurred
#1 : 1
Forcible return from bus-off
End of enumeration elements list.
Status Register
address_offset : 0x842 Bytes (0x0)
size : 16 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
NDST : NEWDATA Status Flag
bits : 0 - -1 (0 bit)
access : read-only
Enumeration:
#0 : 0
No mailbox with NEWDATA bit = 1
#1 : 1
Mailbox(es) with NEWDATA bit = 1
End of enumeration elements list.
SDST : SENTDATA Status Flag
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
No mailbox with SENTDATA bit = 1
#1 : 1
Mailbox(es) with SENTDATA bit = 1
End of enumeration elements list.
RFST : Receive FIFO Status Flag
bits : 2 - 1 (0 bit)
access : read-only
Enumeration:
#0 : 0
No message in receive FIFO (empty)
#1 : 1
Message in receive FIFO
End of enumeration elements list.
TFST : Transmit FIFO Status Flag
bits : 3 - 2 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmit FIFO is full
#1 : 1
Transmit FIFO is not full
End of enumeration elements list.
NMLST : Normal Mailbox Message Lost Status Flag
bits : 4 - 3 (0 bit)
access : read-only
Enumeration:
#0 : 0
No mailbox with MSGLOST bit = 1
#1 : 1
Mailbox(es) with MSGLOST bit = 1
End of enumeration elements list.
FMLST : FIFO Mailbox Message Lost Status Flag
bits : 5 - 4 (0 bit)
access : read-only
Enumeration:
#0 : 0
RFMLF bit = 0
#1 : 1
RFMLF bit = 1
End of enumeration elements list.
TABST : Transmission Abort Status Flag
bits : 6 - 5 (0 bit)
access : read-only
Enumeration:
#0 : 0
No mailbox with TRMABT bit = 1
#1 : 1
Mailbox(es) with TRMABT bit = 1
End of enumeration elements list.
EST : Error Status Flag
bits : 7 - 6 (0 bit)
access : read-only
Enumeration:
#0 : 0
No error occurred
#1 : 1
Error occurred
End of enumeration elements list.
RSTST : CAN Reset Status Flag
bits : 8 - 7 (0 bit)
access : read-only
Enumeration:
#0 : 0
Not in CAN reset mode
#1 : 1
In CAN reset mode
End of enumeration elements list.
HLTST : CAN Halt Status Flag
bits : 9 - 8 (0 bit)
access : read-only
Enumeration:
#0 : 0
Not in CAN halt mode
#1 : 1
In CAN halt mode
End of enumeration elements list.
SLPST : CAN Sleep Status Flag
bits : 10 - 9 (0 bit)
access : read-only
Enumeration:
#0 : 0
Not in CAN sleep mode
#1 : 1
In CAN sleep mode
End of enumeration elements list.
EPST : Error-Passive Status Flag
bits : 11 - 10 (0 bit)
access : read-only
Enumeration:
#0 : 0
Not in error-passive state
#1 : 1
In error-passive state
End of enumeration elements list.
BOST : Bus-Off Status Flag
bits : 12 - 11 (0 bit)
access : read-only
Enumeration:
#0 : 0
Not in bus-off state
#1 : 1
In bus-off state
End of enumeration elements list.
TRMST : Transmit Status Flag (transmitter)
bits : 13 - 12 (0 bit)
access : read-only
Enumeration:
#0 : 0
Bus idle or reception in progress
#1 : 1
Transmission in progress or in bus-off state
End of enumeration elements list.
RECST : Receive Status Flag (receiver)
bits : 14 - 13 (0 bit)
access : read-only
Enumeration:
#0 : 0
Bus idle or transmission in progress
#1 : 1
Reception in progress
End of enumeration elements list.
Bit Configuration Register
address_offset : 0x844 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CCLKS : CAN Clock Source Selection
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
PCLK (generated by the PLL clock)
#1 : 1
CANMCLK (generated by the main clock)
End of enumeration elements list.
TSEG2 : Time Segment 2 Control
bits : 8 - 9 (2 bit)
access : read-write
Enumeration:
#000 : 000
Setting prohibited
#001 : 001
2 Tq
#010 : 010
3 Tq
#011 : 011
4 Tq
#100 : 100
5 Tq
#101 : 101
6 Tq
#110 : 110
7 Tq
#111 : 111
8 Tq
End of enumeration elements list.
SJW : Resynchronization Jump Width Control
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#00 : 00
1 Tq
#01 : 01
2 Tq
#10 : 10
3 Tq
#11 : 11
4 Tq
End of enumeration elements list.
BRP : Prescaler Division Ratio Select . These bits set the frequency of the CAN communication clock (fCANCLK).
bits : 16 - 24 (9 bit)
access : read-write
TSEG1 : Time Segment 1 Control
bits : 28 - 30 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Setting prohibited
#0001 : 0001
Setting prohibited
#0010 : 0010
Setting prohibited
#0011 : 0011
4 Tq
#0100 : 0100
5 Tq
#0101 : 0101
6 Tq
#0110 : 0110
7 Tq
#0111 : 0111
8 Tq
#1000 : 1000
9 Tq
#1001 : 1001
10 Tq
#1010 : 1010
11 Tq
#1011 : 1011
12 Tq
#1100 : 1100
13 Tq
#1101 : 1101
14 Tq
#1110 : 1110
15 Tq
#1111 : 1111
16 Tq
End of enumeration elements list.
Receive FIFO Control Register
address_offset : 0x848 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RFE : Receive FIFO Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Receive FIFO disabled
#1 : 1
Receive FIFO enabled
End of enumeration elements list.
RFUST : Receive FIFO Unread Message Number Status
bits : 1 - 2 (2 bit)
access : read-only
Enumeration:
#000 : 000
No unread message
#001 : 001
1 unread message
#010 : 010
2 unread messages
#011 : 011
3 unread messages
#100 : 100
4 unread messages
: others
Setting prohibited
End of enumeration elements list.
RFMLF : Receive FIFO Message Lost Flag
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
No receive FIFO message lost has occurred
#1 : 1
Receive FIFO message lost has occurred
End of enumeration elements list.
RFFST : Receive FIFO Full Status Flag
bits : 5 - 4 (0 bit)
access : read-only
Enumeration:
#0 : 0
Receive FIFO is not full
#1 : 1
Receive FIFO is full (4 unread messages)
End of enumeration elements list.
RFWST : Receive FIFO Buffer Warning Status Flag
bits : 6 - 5 (0 bit)
access : read-only
Enumeration:
#0 : 0
Receive FIFO is not buffer warning
#1 : 1
Receive FIFO is buffer warning (3 unread messages)
End of enumeration elements list.
RFEST : Receive FIFO Empty Status Flag
bits : 7 - 6 (0 bit)
access : read-only
Enumeration:
#0 : 0
Unread message in receive FIFO
#1 : 1
No unread message in receive FIFO
End of enumeration elements list.
Receive FIFO Pointer Control Register
address_offset : 0x849 Bytes (0x0)
size : 8 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
RFPCR : The CPU-side pointer for the receive FIFO is incremented by writing FFh to RFPCR.
bits : 0 - 6 (7 bit)
access : write-only
Transmit FIFO Control Register
address_offset : 0x84A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TFE : Transmit FIFO Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmit FIFO disabled
#1 : 1
Transmit FIFO enabled
End of enumeration elements list.
TFUST : Transmit FIFO Unsent Message Number Status
bits : 1 - 2 (2 bit)
access : read-only
Enumeration:
#000 : 000
No unsent message
#001 : 001
1 unsent message
#010 : 010
2 unsent messages
#011 : 011
3 unsent messages
#100 : 100
4 unsent messages
: others
Setting prohibited
End of enumeration elements list.
TFFST : Transmit FIFO Full Status
bits : 6 - 5 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmit FIFO is not full
#1 : 1
Transmit FIFO is full (4 unsent messages)
End of enumeration elements list.
TFEST : Transmit FIFO Empty Status
bits : 7 - 6 (0 bit)
access : read-only
Enumeration:
#0 : 0
Unsent message in transmit FIFO
#1 : 1
No unsent message in transmit FIFO
End of enumeration elements list.
Transmit FIFO Pointer Control Register
address_offset : 0x84B Bytes (0x0)
size : 8 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
TFPCR : The CPU-side pointer for the transmit FIFO is incremented by writing FFh to TFPCR.
bits : 0 - 6 (7 bit)
access : write-only
Error Interrupt Enable Register
address_offset : 0x84C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEIE : Bus Error Interrupt Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Bus error interrupt disabled
#1 : 1
Bus error interrupt enabled
End of enumeration elements list.
EWIE : Error-Warning Interrupt Enable
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
Error-warning interrupt disabled
#1 : 1
Error-warning interrupt enabled
End of enumeration elements list.
EPIE : Error-Passive Interrupt Enable
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Error-passive interrupt disabled
#1 : 1
Error-passive interrupt enabled
End of enumeration elements list.
BOEIE : Bus-Off Entry Interrupt Enable
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
Bus-off entry interrupt disabled
#1 : 1
Bus-off entry interrupt enabled
End of enumeration elements list.
BORIE : Bus-Off Recovery Interrupt Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
Bus-off recovery interrupt disabled
#1 : 1
Bus-off recovery interrupt enabled
End of enumeration elements list.
ORIE : Overrun Interrupt Enable
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
Receive overrun interrupt disabled
#1 : 1
Receive overrun interrupt enabled
End of enumeration elements list.
OLIE : Overload Frame Transmit Interrupt Enable
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Overload frame transmit interrupt disabled
#1 : 1
Overload frame transmit interrupt enabled
End of enumeration elements list.
BLIE : Bus Lock Interrupt Enable
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Bus lock interrupt disabled
#1 : 1
Bus lock interrupt enabled
End of enumeration elements list.
Error Interrupt Factor Judge Register
address_offset : 0x84D Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
BEIF : Bus Error Detect Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No bus error detected
#1 : 1
Bus error detected
End of enumeration elements list.
EWIF : Error-Warning Detect Flag
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
No error-warning detected
#1 : 1
Error-warning detected
End of enumeration elements list.
EPIF : Error-Passive Detect Flag
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No error-passive detected
#1 : 1
Error-passive detected
End of enumeration elements list.
BOEIF : Bus-Off Entry Detect Flag
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
No bus-off entry detected
#1 : 1
Bus-off entry detected
End of enumeration elements list.
BORIF : Bus-Off Recovery Detect Flag
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
No bus-off recovery detected
#1 : 1
Bus-off recovery detected
End of enumeration elements list.
ORIF : Receive Overrun Detect Flag
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
No receive overrun detected
#1 : 1
Receive overrun detected
End of enumeration elements list.
OLIF : Overload Frame Transmission Detect Flag
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
No overload frame transmission detected
#1 : 1
Overload frame transmission detected
End of enumeration elements list.
BLIF : Bus Lock Detect Flag
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
No bus lock detected
#1 : 1
Bus lock detected
End of enumeration elements list.
Receive Error Count Register
address_offset : 0x84E Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
RECR : Receive error count functionRECR increments or decrements the counter value according to the error status of the CAN module during reception.
bits : 0 - 6 (7 bit)
access : read-only
Transmit Error Count Register
address_offset : 0x84F Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TECR : Transmit error count functionTECR increments or decrements the counter value according to the error status of the CAN module during transmission.
bits : 0 - 6 (7 bit)
access : read-only
Error Code Store Register
address_offset : 0x850 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEF : Stuff Error Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No stuff error detected
#1 : 1
Stuff error detected
End of enumeration elements list.
FEF : Form Error Flag
bits : 1 - 0 (0 bit)
access : read-write
Enumeration:
#0 : 0
No form error detected
#1 : 1
Form error detected
End of enumeration elements list.
AEF : ACK Error Flag
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No ACK error detected
#1 : 1
ACK error detected
End of enumeration elements list.
CEF : CRC Error Flag
bits : 3 - 2 (0 bit)
access : read-write
Enumeration:
#0 : 0
No CRC error detected
#1 : 1
CRC error detected
End of enumeration elements list.
BE1F : Bit Error (recessive) Flag
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
No bit error (recessive) detected
#1 : 1
Bit error (recessive) detected
End of enumeration elements list.
BE0F : Bit Error (dominant) Flag
bits : 5 - 4 (0 bit)
access : read-write
Enumeration:
#0 : 0
No bit error (dominant) detected
#1 : 1
Bit error (dominant) detected
End of enumeration elements list.
ADEF : ACK Delimiter Error Flag
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
No ACK delimiter error detected
#1 : 1
ACK delimiter error detected
End of enumeration elements list.
EDPM : Error Display Mode Select
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Output of first detected error code
#1 : 1
Output of accumulated error code
End of enumeration elements list.
Channel Search Support Register
address_offset : 0x851 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CSSR : When the value for the channel search is input, the channel number is output to MSSR.
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Search Status Register
address_offset : 0x852 Bytes (0x0)
size : 8 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
MBNST : Search Result Mailbox Number Status These bits output the smallest mailbox number that is searched in each mode of MSMR.
bits : 0 - 3 (4 bit)
access : read-only
SEST : Search Result Status
bits : 7 - 6 (0 bit)
access : read-only
Enumeration:
#0 : 0
Search result found
#1 : 1
No search result
End of enumeration elements list.
Mailbox Search Mode Register
address_offset : 0x853 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MBSM : Mailbox Search Mode Select
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#00 : 00
Receive mailbox search mode
#01 : 01
Transmit mailbox search mode
#10 : 10
Message lost search mode
#11 : 11
Channel search mode
End of enumeration elements list.
Time Stamp Register
address_offset : 0x854 Bytes (0x0)
size : 16 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TSR : Free-running counter value for the time stamp function
bits : 0 - 14 (15 bit)
access : read-only
Acceptance Filter Support Register
address_offset : 0x856 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AFSR : After the standard ID of a received message is written, the value converted for data table search can be read.
bits : 0 - 14 (15 bit)
access : read-write
Test Control Register
address_offset : 0x858 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSTE : CAN Test Mode Enable
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
CAN test mode disabled
#1 : 1
CAN test mode enabled
End of enumeration elements list.
TSTM : CAN Test Mode Select
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#00 : 00
Other than CAN test mode
#01 : 01
Listen-only mode
#10 : 10
Self-test mode 0 (external loopback)
#11 : 11
Self-test mode 1 (internal loopback)
End of enumeration elements list.
Mailbox ID Register
address_offset : 0x860 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0x864 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0x86E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x8A98 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x8A98 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0x9 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0x92C8 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x92C8 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0x9AF9 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0x9AF9 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0xA Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0xA24 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0xA32B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xA32B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox ID Register
address_offset : 0xAA0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0xAA4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0xAAE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0xAB5E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xAB5E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0xB Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0xB392 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xB392 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0xBBC7 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xBBC7 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Data Register
address_offset : 0xC Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Mask Register
address_offset : 0xC04 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
Mailbox Data Register
address_offset : 0xC2E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0xC3FD Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xC3FD Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
FIFO Received ID Compare Registers
address_offset : 0xC64 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0xCC34 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xCC34 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox ID Register
address_offset : 0xCF0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0xCF4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0xCFE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0xD Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0xD46C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xD46C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0xDCA5 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xDCA5 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0xE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Mailbox Data Register
address_offset : 0xE39 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DATA : DATA0 to DATA7 store the transmitted or received CAN message data. Transmission or reception starts from DATA0. The bit order on the CAN bus is MSB-first, and transmission or reception starts from bit 7
bits : 0 - 6 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0xE4DF Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xE4DF Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0xED1A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xED1A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox ID Register
address_offset : 0xF50 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EID : Extended ID
bits : 0 - 16 (17 bit)
access : read-write
SID : Standard ID
bits : 18 - 27 (10 bit)
access : read-write
RTR : Remote Transmission Request
bits : 30 - 29 (0 bit)
access : read-write
Enumeration:
#0 : 0
Data frame
#1 : 1
Remote frame
End of enumeration elements list.
IDE : ID Extension
bits : 31 - 30 (0 bit)
access : read-write
Enumeration:
#0 : 0
Standard ID
#1 : 1
Extended ID
End of enumeration elements list.
Mailbox DLC Register
address_offset : 0xF54 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DLC : Data Length Code
bits : 0 - 2 (3 bit)
access : read-write
Enumeration:
#0000 : 0000
Data length = 0 byte
#0001 : 0001
Data length = 1 byte
#0010 : 0010
Data length = 2 bytes
#0011 : 0011
Data length = 3 bytes
#0100 : 0100
Data length = 4 bytes
#0101 : 0101
Data length = 5 bytes
#0110 : 0110
Data length = 6 bytes
#0111 : 0111
Data length = 7 bytes
End of enumeration elements list.
Message Control Register for Transmit
address_offset : 0xF556 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xF556 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Mailbox Timestamp Register
address_offset : 0xF5E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TSL : Time Stamp Higher ByteBits TSL[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 0 - 6 (7 bit)
access : read-write
TSH : Time Stamp Lower ByteBits TSH[7:0] store the counter value of the time stamp when received messages are stored in the mailbox.
bits : 8 - 14 (7 bit)
access : read-write
Message Control Register for Transmit
address_offset : 0xFD93 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SENTDATA : Transmission Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission is not completed
#1 : 1
Transmission is completed
End of enumeration elements list.
TRMACTIVE : Transmission-in-Progress Status Flag (Transmit mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Transmission is pending or transmission is not requested
#1 : 1
From acceptance of transmission request to completion of transmission, or error/arbitration-lost
End of enumeration elements list.
TRMABT : Transmission Abort Complete Flag (Transmit mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Transmission has started, transmission abort failed because transmission is completed, or transmission abort is not requested
#1 : 1
Transmission abort is completed
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Message Control Register for Receive
address_offset : 0xFD93 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
alternate_register : MCTL_TX[%s]
reset_Mask : 0x0
NEWDATA : Reception Complete Flag
bits : 0 - -1 (0 bit)
access : read-write
Enumeration:
#0 : 0
No data has been received or 0 is written to the NEWDATA bit
#1 : 1
A new message is being stored or has been stored to the mailbox
End of enumeration elements list.
INVALDATA : Reception-in-Progress Status Flag (Receive mailbox setting enabled)
bits : 1 - 0 (0 bit)
access : read-only
Enumeration:
#0 : 0
Message valid
#1 : 1
Message being updated
End of enumeration elements list.
MSGLOST : Message Lost Flag(Receive mailbox setting enabled)
bits : 2 - 1 (0 bit)
access : read-write
Enumeration:
#0 : 0
Message is not overwritten or overrun
#1 : 1
Message is overwritten or overrun
End of enumeration elements list.
ONESHOT : One-Shot Enable
bits : 4 - 3 (0 bit)
access : read-write
Enumeration:
#0 : 0
One-shot reception or one-shot transmission disabled
#1 : 1
One-shot reception or one-shot transmission enabled
End of enumeration elements list.
RECREQ : Receive Mailbox Request
bits : 6 - 5 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for reception
#1 : 1
Configured for reception
End of enumeration elements list.
TRMREQ : Transmit Mailbox Request
bits : 7 - 6 (0 bit)
access : read-write
Enumeration:
#0 : 0
Not configured for transmission
#1 : 1
Configured for transmission
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.