\n
address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
No Description
address_offset : 0x0 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
IPVERSION : IP Version ID
bits : 0 - 31 (32 bit)
access : read-only
No Description
address_offset : 0x10 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
RUNNING : BURTC running status
bits : 0 - 0 (1 bit)
access : read-only
LOCK : Configuration Lock Status
bits : 1 - 1 (1 bit)
access : read-only
Enumeration:
0 : UNLOCKED
All BURTC lockable registers are unlocked.
1 : LOCKED
All BURTC lockable registers are locked.
End of enumeration elements list.
No Description
address_offset : 0x14 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OF : Overflow Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write
COMP : Compare Match Interrupt Flag
bits : 1 - 1 (1 bit)
access : read-write
No Description
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OF : Overflow Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write
COMP : Compare Match Interrupt Flag
bits : 1 - 1 (1 bit)
access : read-write
No Description
address_offset : 0x1C Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRECNT : Pre-Counter Value
bits : 0 - 14 (15 bit)
access : read-write
No Description
address_offset : 0x20 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CNT : Counter Value
bits : 0 - 31 (32 bit)
access : read-write
No Description
address_offset : 0x24 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OFEM4WUEN : Overflow EM4 Wakeup Enable
bits : 0 - 0 (1 bit)
access : read-write
COMPEM4WUEN : Compare Match EM4 Wakeup Enable
bits : 1 - 1 (1 bit)
access : read-write
No Description
address_offset : 0x28 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
START : Sync busy for START
bits : 0 - 0 (1 bit)
access : read-only
STOP : Sync busy for STOP
bits : 1 - 1 (1 bit)
access : read-only
PRECNT : Sync busy for PRECNT
bits : 2 - 2 (1 bit)
access : read-only
CNT : Sync busy for CNT
bits : 3 - 3 (1 bit)
access : read-only
COMP : Sync busy for COMP
bits : 4 - 4 (1 bit)
access : read-only
EN : Sync busy for EN
bits : 5 - 5 (1 bit)
access : read-only
No Description
address_offset : 0x2C Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
LOCKKEY : Configuration Lock Key
bits : 0 - 15 (16 bit)
access : write-only
Enumeration:
44776 : UNLOCK
Write to unlock all BURTC lockable registers
End of enumeration elements list.
No Description
address_offset : 0x30 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP : Compare Value
bits : 0 - 31 (32 bit)
access : read-write
No Description
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : BURTC Enable
bits : 0 - 0 (1 bit)
access : read-write
No Description
address_offset : 0x8 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DEBUGRUN : Debug Mode Run Enable
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : DISABLE
BURTC is frozen in debug mode
1 : ENABLE
BURTC is running in debug mode
End of enumeration elements list.
COMPTOP : Compare Channel is Top Value
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
0 : DISABLE
The top value of the BURTC is 4294967295 (0xFFFFFFFF)
1 : ENABLE
The top value of the BURTC is given by COMP
End of enumeration elements list.
CNTPRESC : Counter prescaler value.
bits : 4 - 7 (4 bit)
access : read-write
Enumeration:
0 : DIV1
CLK_CNT = (BURTC LF CLK)/1
1 : DIV2
CLK_CNT = (BURTC LF CLK)/2
2 : DIV4
CLK_CNT = (BURTC LF CLK)/4
3 : DIV8
CLK_CNT = (BURTC LF CLK)/8
4 : DIV16
CLK_CNT = (BURTC LF CLK)/16
5 : DIV32
CLK_CNT = (BURTC LF CLK)/32
6 : DIV64
CLK_CNT = (BURTC LF CLK)/64
7 : DIV128
CLK_CNT = (BURTC LF CLK)/128
8 : DIV256
CLK_CNT = (BURTC LF CLK)/256
9 : DIV512
CLK_CNT = (BURTC LF CLK)/512
10 : DIV1024
CLK_CNT = (BURTC LF CLK)/1024
11 : DIV2048
CLK_CNT = (BURTC LF CLK)/2048
12 : DIV4096
CLK_CNT = (BURTC LF CLK)/4096
13 : DIV8192
CLK_CNT = (BURTC LF CLK)/8192
14 : DIV16384
CLK_CNT = (BURTC LF CLK)/16384
15 : DIV32768
CLK_CNT = (BURTC LF CLK)/32768
End of enumeration elements list.
No Description
address_offset : 0xC Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
START : Start BURTC counter
bits : 0 - 0 (1 bit)
access : write-only
STOP : Stop BURTC counter
bits : 1 - 1 (1 bit)
access : write-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.