\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection : not protected
Interrupt Flag Set Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PPUPRIV : Set PPUPRIV Interrupt Flag
bits : 0 - 0 (1 bit)
access : write-only
Interrupt Flag Clear Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PPUPRIV : Clear PPUPRIV Interrupt Flag
bits : 0 - 0 (1 bit)
access : write-only
Interrupt Enable Register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PPUPRIV : PPUPRIV Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
PPU Control Register
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ENABLE :
bits : 0 - 0 (1 bit)
access : read-write
PPU Privilege Access Type Descriptor 0
address_offset : 0x50 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACMP0 : Analog Comparator 0 access control bit
bits : 0 - 0 (1 bit)
access : read-write
ACMP1 : Analog Comparator 1 access control bit
bits : 1 - 1 (1 bit)
access : read-write
ACMP2 : Analog Comparator 1 access control bit
bits : 2 - 2 (1 bit)
access : read-write
ACMP3 : Analog Comparator 3 access control bit
bits : 3 - 3 (1 bit)
access : read-write
ADC0 : Analog to Digital Converter 0 access control bit
bits : 4 - 4 (1 bit)
access : read-write
ADC1 : Analog to Digital Converter 0 access control bit
bits : 5 - 5 (1 bit)
access : read-write
CAN0 : CAN 0 access control bit
bits : 6 - 6 (1 bit)
access : read-write
CAN1 : CAN 1 access control bit
bits : 7 - 7 (1 bit)
access : read-write
CMU : Clock Management Unit access control bit
bits : 8 - 8 (1 bit)
access : read-write
CRYOTIMER : CRYOTIMER access control bit
bits : 9 - 9 (1 bit)
access : read-write
CRYPTO0 : Advanced Encryption Standard Accelerator access control bit
bits : 10 - 10 (1 bit)
access : read-write
CSEN : Capacitive touch sense module access control bit
bits : 11 - 11 (1 bit)
access : read-write
VDAC0 : Digital to Analog Converter 0 access control bit
bits : 12 - 12 (1 bit)
access : read-write
PRS : Peripheral Reflex System access control bit
bits : 13 - 13 (1 bit)
access : read-write
EBI : External Bus Interface access control bit
bits : 14 - 14 (1 bit)
access : read-write
EMU : Energy Management Unit access control bit
bits : 15 - 15 (1 bit)
access : read-write
ETH : Ethernet Controller access control bit
bits : 16 - 16 (1 bit)
access : read-write
FPUEH : FPU Exception Handler access control bit
bits : 17 - 17 (1 bit)
access : read-write
GPCRC : General Purpose CRC access control bit
bits : 18 - 18 (1 bit)
access : read-write
GPIO : General purpose Input/Output access control bit
bits : 19 - 19 (1 bit)
access : read-write
I2C0 : I2C 0 access control bit
bits : 20 - 20 (1 bit)
access : read-write
I2C1 : I2C 1 access control bit
bits : 21 - 21 (1 bit)
access : read-write
I2C2 : I2C 2 access control bit
bits : 22 - 22 (1 bit)
access : read-write
IDAC0 : Current Digital to Analog Converter 0 access control bit
bits : 23 - 23 (1 bit)
access : read-write
MSC : Memory System Controller access control bit
bits : 24 - 24 (1 bit)
access : read-write
LCD : Liquid Crystal Display Controller access control bit
bits : 25 - 25 (1 bit)
access : read-write
LDMA : Linked Direct Memory Access Controller access control bit
bits : 26 - 26 (1 bit)
access : read-write
LESENSE : Low Energy Sensor Interface access control bit
bits : 27 - 27 (1 bit)
access : read-write
LETIMER0 : Low Energy Timer 0 access control bit
bits : 28 - 28 (1 bit)
access : read-write
LETIMER1 : Low Energy Timer 1 access control bit
bits : 29 - 29 (1 bit)
access : read-write
LEUART0 : Low Energy UART 0 access control bit
bits : 30 - 30 (1 bit)
access : read-write
LEUART1 : Low Energy UART 1 access control bit
bits : 31 - 31 (1 bit)
access : read-write
PPU Privilege Access Type Descriptor 1
address_offset : 0x54 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PCNT0 : Pulse Counter 0 access control bit
bits : 0 - 0 (1 bit)
access : read-write
PCNT1 : Pulse Counter 1 access control bit
bits : 1 - 1 (1 bit)
access : read-write
PCNT2 : Pulse Counter 2 access control bit
bits : 2 - 2 (1 bit)
access : read-write
QSPI0 : Quad-SPI access control bit
bits : 3 - 3 (1 bit)
access : read-write
RMU : Reset Management Unit access control bit
bits : 4 - 4 (1 bit)
access : read-write
RTC : Real-Time Counter access control bit
bits : 5 - 5 (1 bit)
access : read-write
RTCC : Real-Time Counter and Calendar access control bit
bits : 6 - 6 (1 bit)
access : read-write
SDIO : SDIO Controller access control bit
bits : 7 - 7 (1 bit)
access : read-write
SMU : Security Management Unit access control bit
bits : 8 - 8 (1 bit)
access : read-write
TIMER0 : Timer 0 access control bit
bits : 9 - 9 (1 bit)
access : read-write
TIMER1 : Timer 1 access control bit
bits : 10 - 10 (1 bit)
access : read-write
TIMER2 : Timer 2 access control bit
bits : 11 - 11 (1 bit)
access : read-write
TIMER3 : Timer 3 access control bit
bits : 12 - 12 (1 bit)
access : read-write
TIMER4 : Timer 4 access control bit
bits : 13 - 13 (1 bit)
access : read-write
TIMER5 : Timer 5 access control bit
bits : 14 - 14 (1 bit)
access : read-write
TIMER6 : Timer 6 access control bit
bits : 15 - 15 (1 bit)
access : read-write
TRNG0 : True Random Number Generator 0 access control bit
bits : 16 - 16 (1 bit)
access : read-write
UART0 : Universal Asynchronous Receiver/Transmitter 0 access control bit
bits : 17 - 17 (1 bit)
access : read-write
UART1 : Universal Asynchronous Receiver/Transmitter 1 access control bit
bits : 18 - 18 (1 bit)
access : read-write
USART0 : Universal Synchronous/Asynchronous Receiver/Transmitter 0 access control bit
bits : 19 - 19 (1 bit)
access : read-write
USART1 : Universal Synchronous/Asynchronous Receiver/Transmitter 1 access control bit
bits : 20 - 20 (1 bit)
access : read-write
USART2 : Universal Synchronous/Asynchronous Receiver/Transmitter 2 access control bit
bits : 21 - 21 (1 bit)
access : read-write
USART3 : Universal Synchronous/Asynchronous Receiver/Transmitter 3 access control bit
bits : 22 - 22 (1 bit)
access : read-write
USART4 : Universal Synchronous/Asynchronous Receiver/Transmitter 4 access control bit
bits : 23 - 23 (1 bit)
access : read-write
USART5 : Universal Synchronous/Asynchronous Receiver/Transmitter 5 access control bit
bits : 24 - 24 (1 bit)
access : read-write
USB : Universal Serial Bus Interface access control bit
bits : 25 - 25 (1 bit)
access : read-write
WDOG0 : Watchdog access control bit
bits : 26 - 26 (1 bit)
access : read-write
WDOG1 : Watchdog access control bit
bits : 27 - 27 (1 bit)
access : read-write
WTIMER0 : Wide Timer 0 access control bit
bits : 28 - 28 (1 bit)
access : read-write
WTIMER1 : Wide Timer 0 access control bit
bits : 29 - 29 (1 bit)
access : read-write
WTIMER2 : Wide Timer 2 access control bit
bits : 30 - 30 (1 bit)
access : read-write
WTIMER3 : Wide Timer 3 access control bit
bits : 31 - 31 (1 bit)
access : read-write
PPU Privilege Access Type Descriptor 2
address_offset : 0x58 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PPU Fault Status
address_offset : 0x90 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PERIPHID :
bits : 0 - 6 (7 bit)
access : read-only
Enumeration:
0x00000000 : ACMP0
Analog Comparator 0
0x00000001 : ACMP1
Analog Comparator 1
0x00000002 : ACMP2
Analog Comparator 1
0x00000003 : ACMP3
Analog Comparator 3
0x00000004 : ADC0
Analog to Digital Converter 0
0x00000005 : ADC1
Analog to Digital Converter 0
0x00000006 : CAN0
CAN 0
0x00000007 : CAN1
CAN 1
0x00000008 : CMU
Clock Management Unit
0x00000009 : CRYOTIMER
CRYOTIMER
0x0000000A : CRYPTO0
Advanced Encryption Standard Accelerator
0x0000000B : CSEN
Capacitive touch sense module
0x0000000C : VDAC0
Digital to Analog Converter 0
0x0000000D : PRS
Peripheral Reflex System
0x0000000E : EBI
External Bus Interface
0x0000000F : EMU
Energy Management Unit
0x00000010 : ETH
Ethernet Controller
0x00000011 : FPUEH
FPU Exception Handler
0x00000012 : GPCRC
General Purpose CRC
0x00000013 : GPIO
General purpose Input/Output
0x00000014 : I2C0
I2C 0
0x00000015 : I2C1
I2C 1
0x00000016 : I2C2
I2C 2
0x00000017 : IDAC0
Current Digital to Analog Converter 0
0x00000018 : MSC
Memory System Controller
0x00000019 : LCD
Liquid Crystal Display Controller
0x0000001A : LDMA
Linked Direct Memory Access Controller
0x0000001B : LESENSE
Low Energy Sensor Interface
0x0000001C : LETIMER0
Low Energy Timer 0
0x0000001D : LETIMER1
Low Energy Timer 1
0x0000001E : LEUART0
Low Energy UART 0
0x0000001F : LEUART1
Low Energy UART 1
0x00000020 : PCNT0
Pulse Counter 0
0x00000021 : PCNT1
Pulse Counter 1
0x00000022 : PCNT2
Pulse Counter 2
0x00000023 : QSPI0
Quad-SPI
0x00000024 : RMU
Reset Management Unit
0x00000025 : RTC
Real-Time Counter
0x00000026 : RTCC
Real-Time Counter and Calendar
0x00000027 : SDIO
SDIO Controller
0x00000028 : SMU
Security Management Unit
0x00000029 : TIMER0
Timer 0
0x0000002A : TIMER1
Timer 1
0x0000002B : TIMER2
Timer 2
0x0000002C : TIMER3
Timer 3
0x0000002D : TIMER4
Timer 4
0x0000002E : TIMER5
Timer 5
0x0000002F : TIMER6
Timer 6
0x00000030 : TRNG0
True Random Number Generator 0
0x00000031 : UART0
Universal Asynchronous Receiver/Transmitter 0
0x00000032 : UART1
Universal Asynchronous Receiver/Transmitter 1
0x00000033 : USART0
Universal Synchronous/Asynchronous Receiver/Transmitter 0
0x00000034 : USART1
Universal Synchronous/Asynchronous Receiver/Transmitter 1
0x00000035 : USART2
Universal Synchronous/Asynchronous Receiver/Transmitter 2
0x00000036 : USART3
Universal Synchronous/Asynchronous Receiver/Transmitter 3
0x00000037 : USART4
Universal Synchronous/Asynchronous Receiver/Transmitter 4
0x00000038 : USART5
Universal Synchronous/Asynchronous Receiver/Transmitter 5
0x00000039 : USB
Universal Serial Bus Interface
0x0000003A : WDOG0
Watchdog
0x0000003B : WDOG1
Watchdog
0x0000003C : WTIMER0
Wide Timer 0
0x0000003D : WTIMER1
Wide Timer 0
0x0000003E : WTIMER2
Wide Timer 2
0x0000003F : WTIMER3
Wide Timer 3
End of enumeration elements list.
Interrupt Flag Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PPUPRIV : PPU Privilege Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.