\n

LFRCO_S

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

IPVERSION

IF

IEN

LOCK

CFG

NOMCAL

NOMCALINV

CMD

CTRL

STATUS


IPVERSION

Contains the LFRCO ip version
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IPVERSION IPVERSION read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPVERSION

IPVERSION : IP version ID
bits : 0 - 31 (32 bit)
access : read-only


IF

Interrupt flag register
address_offset : 0x14 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IF IF read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RDYIF RDY POSEDGEIF POSEDGE NEGEDGEIF NEGEDGE TCDONEIF TCDONE CALDONEIF CALDONE TEMPCHANGEIF TEMPCHANGE SCHEDERRIF SCHEDERR TCOORIF TCOOR CALOORIF CALOOR

RDYIF : Ready Flag
bits : 0 - 0 (1 bit)
access : read-write

RDY : Ready Flag
bits : 0 - 0 (1 bit)
access : read-write

POSEDGEIF : Rising Edge Flag
bits : 1 - 1 (1 bit)
access : read-write

POSEDGE : Rising Edge Flag
bits : 1 - 1 (1 bit)
access : read-write

NEGEDGEIF : Falling Edge Flag
bits : 2 - 2 (1 bit)
access : read-write

NEGEDGE : Falling Edge Flag
bits : 2 - 2 (1 bit)
access : read-write

TCDONEIF : Temperature Check Done Flag
bits : 8 - 8 (1 bit)
access : read-write

TCDONE : Temperature Check Done Flag
bits : 8 - 8 (1 bit)
access : read-write

CALDONEIF : Calibration Done Flag
bits : 9 - 9 (1 bit)
access : read-write

CALDONE : Calibration Done Flag
bits : 9 - 9 (1 bit)
access : read-write

TEMPCHANGEIF : Temperature Change Flag
bits : 10 - 10 (1 bit)
access : read-write

TEMPCHANGE : Temperature Change Flag
bits : 10 - 10 (1 bit)
access : read-write

SCHEDERRIF : Scheduling Error Flag
bits : 16 - 16 (1 bit)
access : read-write

SCHEDERR : Scheduling Error Flag
bits : 16 - 16 (1 bit)
access : read-write

TCOORIF : Temperature Check Out Of Range Flag
bits : 17 - 17 (1 bit)
access : read-write

TCOOR : Temperature Check Out Of Range Flag
bits : 17 - 17 (1 bit)
access : read-write

CALOORIF : Calibration Out Of Range Flag
bits : 18 - 18 (1 bit)
access : read-write

CALOOR : Calibration Out Of Range Flag
bits : 18 - 18 (1 bit)
access : read-write


IEN

Interrupt enable register
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IEN IEN read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RDYIEN RDY POSEDGEIEN POSEDGE NEGEDGEIEN NEGEDGE TCDONEIEN TCDONE CALDONEIEN CALDONE TEMPCHANGEIEN TEMPCHANGE SCHEDERRIEN SCHEDERR TCOORIEN TCOOR CALOORIEN CALOOR

RDYIEN : Ready Enable
bits : 0 - 0 (1 bit)
access : read-write

RDY : Ready Enable
bits : 0 - 0 (1 bit)
access : read-write

POSEDGEIEN : Rising Edge Enable
bits : 1 - 1 (1 bit)
access : read-write

POSEDGE : Rising Edge Enable
bits : 1 - 1 (1 bit)
access : read-write

NEGEDGEIEN : Falling Edge Enable
bits : 2 - 2 (1 bit)
access : read-write

NEGEDGE : Falling Edge Enable
bits : 2 - 2 (1 bit)
access : read-write

TCDONEIEN : Temperature Check Done Enable
bits : 8 - 8 (1 bit)
access : read-write

TCDONE : Temperature Check Done Enable
bits : 8 - 8 (1 bit)
access : read-write

CALDONEIEN : Calibration Done Enable
bits : 9 - 9 (1 bit)
access : read-write

CALDONE : Calibration Done Enable
bits : 9 - 9 (1 bit)
access : read-write

TEMPCHANGEIEN : Temperature Change Enable
bits : 10 - 10 (1 bit)
access : read-write

TEMPCHANGE : Temperature Change Enable
bits : 10 - 10 (1 bit)
access : read-write

SCHEDERRIEN : Scheduling Error Enable
bits : 16 - 16 (1 bit)
access : read-write

SCHEDERR : Scheduling Error Enable
bits : 16 - 16 (1 bit)
access : read-write

TCOORIEN : Temperature Check Out Of Range Enable
bits : 17 - 17 (1 bit)
access : read-write

TCOOR : Temperature Check Out Of Range Enable
bits : 17 - 17 (1 bit)
access : read-write

CALOORIEN : Calibration Out Of Range Enable
bits : 18 - 18 (1 bit)
access : read-write

CALOOR : Calibration Out Of Range Enable
bits : 18 - 18 (1 bit)
access : read-write


LOCK

Configuration lock register. Locks and unlocks access to configuration registers.
address_offset : 0x20 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0

LOCK LOCK write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 LOCKKEY

LOCKKEY : Lock Key
bits : 0 - 15 (16 bit)
access : write-only

Enumeration:

0 : LOCK

Lock Configuration Registers

3987 : UNLOCK

Unlock Configuration Registers

End of enumeration elements list.


CFG

Configuration register
address_offset : 0x24 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CFG CFG read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 HIGHPRECEN

HIGHPRECEN : High Precision Enable
bits : 0 - 0 (1 bit)
access : read-write


NOMCAL

Nominal calibration register
address_offset : 0x2C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

NOMCAL NOMCAL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NOMCALCNT

NOMCALCNT : Nominal Calibration Count
bits : 0 - 20 (21 bit)
access : read-write


NOMCALINV

Nominal calibration inverted register
address_offset : 0x30 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

NOMCALINV NOMCALINV read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NOMCALCNTINV

NOMCALCNTINV : Nominal Calibration Count Inverted
bits : 0 - 16 (17 bit)
access : read-write


CMD

Command register
address_offset : 0x34 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0

CMD CMD write-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 REDUCETCINT

REDUCETCINT : Reduce Temperature Check Interval
bits : 0 - 0 (1 bit)
access : write-only


CTRL

Control register
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CTRL CTRL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FORCEEN DISONDEMAND

FORCEEN : Force Enable
bits : 0 - 0 (1 bit)
access : read-write

DISONDEMAND : Disable On-Demand
bits : 1 - 1 (1 bit)
access : read-write


STATUS

Status register
address_offset : 0x8 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0

STATUS STATUS read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RDY ENS LOCK

RDY : Ready Status
bits : 0 - 0 (1 bit)
access : read-only

ENS : Enabled Status
bits : 16 - 16 (1 bit)
access : read-only

LOCK : Lock Status
bits : 31 - 31 (1 bit)
access : read-only

Enumeration:

0 : UNLOCKED

Access to configuration registers not locked

1 : LOCKED

Access to configuration registers locked

End of enumeration elements list.



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.