Embeetle, an IDE designed from scratch for embedded software developers.address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected
No Description
address_offset : 0x0 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OPPTRA : OpPtrA
bits : 0 - 3 (4 bit)
access : read-write
OPPTRB : OpPtrB
bits : 8 - 11 (4 bit)
access : read-write
OPPTRC : OpPtrC
bits : 16 - 19 (4 bit)
access : read-write
OPPTRN : OpPtrN
bits : 24 - 27 (4 bit)
access : read-write
No Description
address_offset : 0x10 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
SW : Software version number
bits : 0 - 7 (8 bit)
access : read-only
HW : Hardware version number
bits : 8 - 15 (8 bit)
access : read-only
No Description
address_offset : 0x14 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
TIMER : Timer
bits : 0 - 31 (32 bit)
access : read-only
No Description
address_offset : 0x4 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OPERATION : Type of Operation
bits : 0 - 6 (7 bit)
access : read-write
FIELD : Field
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
0 : GFP
Field is GF(p)
1 : GF2M
Field is GF(2^m)
End of enumeration elements list.
SIZE : Size of Operands in data memory
bits : 8 - 18 (11 bit)
access : read-write
SELCURVE : Select Curve
bits : 20 - 22 (3 bit)
access : read-write
Enumeration:
0 : NONE
No acceleration
1 : P256
P256
2 : P384
P384
3 : P521
P521/E-521
4 : P192
P192
5 : C25519
Curve25519/Ed25519
End of enumeration elements list.
EDWARDS : Edwards Curve Enable
bits : 26 - 26 (1 bit)
access : read-write
BUFSEL : Buffer Select
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
0 : MEM0
use data in data memory 0
End of enumeration elements list.
SWAPBYTES : Swap bytes
bits : 28 - 28 (1 bit)
access : read-write
Enumeration:
0 : NATIVE
Native format (little endian)
1 : SWAPPED
Byte swapped (big endian)
End of enumeration elements list.
FLAGA : Flag A
bits : 29 - 29 (1 bit)
access : read-write
FLAGB : Flag B
bits : 30 - 30 (1 bit)
access : read-write
CALCR2 : Calculate R2
bits : 31 - 31 (1 bit)
access : read-write
Enumeration:
0 : FALSE
don't recalculate R² mod N
1 : TRUE
re-calculate R² mod N
End of enumeration elements list.
No Description
address_offset : 0x8 Bytes (0x0)
access : write-only
reset_value : 0x0
reset_Mask : 0x0
PKSTART : PK Start
bits : 0 - 0 (1 bit)
access : write-only
IFC : ClearIRQ
bits : 1 - 1 (1 bit)
access : write-only
No Description
address_offset : 0xC Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FAILADDR : Fail Address
bits : 0 - 3 (4 bit)
access : read-only
NOTONCURVE : Point Px not on curve
bits : 4 - 4 (1 bit)
access : read-only
ATINFINITY : Point Px at infinity
bits : 5 - 5 (1 bit)
access : read-only
COUPLENOTVALID : Couple not valid
bits : 6 - 6 (1 bit)
access : read-only
PARAMNNOTVALID : Param n not valid
bits : 7 - 7 (1 bit)
access : read-only
NOTIMPLEMENTED : Not implemented
bits : 8 - 8 (1 bit)
access : read-only
SIGNOTVALID : Signature not valid
bits : 9 - 9 (1 bit)
access : read-only
PARAMABNOTVALID : Param AB not valid
bits : 10 - 10 (1 bit)
access : read-only
NOTINVERTIBLE : Not invertible
bits : 11 - 11 (1 bit)
access : read-only
COMPOSITE : Composite
bits : 12 - 12 (1 bit)
access : read-only
Enumeration:
0 : FALSE
random number under test is probably prime
1 : TRUE
random number under test is composite
End of enumeration elements list.
NOTQUAD : Not quadratic residue
bits : 13 - 13 (1 bit)
access : read-only
PKBUSY : PK busy
bits : 16 - 16 (1 bit)
access : read-only
PKIF : Interrupt status
bits : 17 - 17 (1 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.