\n

ULFRCO_S

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x1000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

IPVERSION

IF

IEN

STATUS


IPVERSION

No Description
address_offset : 0x0 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0

IPVERSION IPVERSION read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IPVERSION

IPVERSION : ULFRCO IP version
bits : 0 - 31 (32 bit)
access : read-only


IF

No Description
address_offset : 0x14 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IF IF read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RDY POSEDGE NEGEDGE

RDY : Ready Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write

POSEDGE : Positive Edge Interrupt Flag
bits : 1 - 1 (1 bit)
access : read-write

NEGEDGE : Negative Edge Interrupt Flag
bits : 2 - 2 (1 bit)
access : read-write


IEN

No Description
address_offset : 0x18 Bytes (0x0)
access : read-write
reset_value : 0x0
reset_Mask : 0x0

IEN IEN read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RDY POSEDGE NEGEDGE

RDY : Enable Ready Interrupt
bits : 0 - 0 (1 bit)
access : read-write

POSEDGE : Enable Positive Edge Interrupt
bits : 1 - 1 (1 bit)
access : read-write

NEGEDGE : Enable Negative Edge Interrupt
bits : 2 - 2 (1 bit)
access : read-write


STATUS

No Description
address_offset : 0x8 Bytes (0x0)
access : read-only
reset_value : 0x0
reset_Mask : 0x0

STATUS STATUS read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RDY ENS

RDY : Ready Status
bits : 0 - 0 (1 bit)
access : read-only

ENS : Enable Status
bits : 16 - 16 (1 bit)
access : read-only



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.