\n

FLASH

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x2000 byte (0x0)
mem_usage : registers
protection : not protected

Registers

ADDR

CHKSUM

STATUS

CTRL

DATA


ADDR

Offset:0x10 Flash Address Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

ADDR ADDR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

CHKSUM

Offset:0x14 Flash Checksum Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0

CHKSUM CHKSUM read-only 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

STATUS

Offset:0x04 Flash Status Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

STATUS STATUS read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BUSY PGERR EOP

BUSY : Busy flag
bits : 0 - 0 (1 bit)
access : read-only

Enumeration:

0 : Idle

Flash operation is stopped.

1 : Busy

Flash operation is in process

End of enumeration elements list.

PGERR : Program error flag
bits : 2 - 4 (3 bit)
access : read-write

Enumeration:

0 : No error

No error

1 : Program error

The address to be programmed contains a value different from 0xFFFF

End of enumeration elements list.

EOP : End of process flag
bits : 5 - 10 (6 bit)
access : read-write

Enumeration:

0 : Busy

Flash operation is not completed

1 : End

Flash operation is completed

End of enumeration elements list.


CTRL

Offset:0x08 Flash Control Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CTRL CTRL read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PG PER STARTE CHK

PG : Flash program choosen
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

0 : Not chosen

Not choose Flash program operation.

1 : Choose Flash program operation

Choose Flash program operation.

End of enumeration elements list.

PER : Page erase choosen
bits : 1 - 2 (2 bit)
access : read-write

Enumeration:

0 : Not chosen

Not choose page erase operation.

1 : Choose page erase operation

Choose page erase operation.

End of enumeration elements list.

STARTE : Start erase operation
bits : 6 - 12 (7 bit)
access : read-write

Enumeration:

0 : Stop/Finish

Erase operation is finished.

1 : Start

Start erase operation

End of enumeration elements list.

CHK : Checksum calculation chosen
bits : 7 - 14 (8 bit)
access : read-write

Enumeration:

0 : Disable

Disable

1 : Enable

Trigger Checksum calculation

End of enumeration elements list.


DATA

Offset:0x0C Flash Data Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

DATA DATA read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0


Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.