\n
address_offset : 0x0 Bytes (0x0)
size : 0x8 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x38 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x28 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x34 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : reserved
protection : not protected
address_offset : 0x8 Bytes (0x0)
size : 0x20 byte (0x0)
mem_usage : reserved
protection : not protected
PG Data Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PG0 : PG0
bits : 0 - 0 (1 bit)
access : read-write
PG Open Drain Control Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PG0OD : PG0OD
bits : 0 - 0 (1 bit)
access : read-write
PG Pull-up Control Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PG0UP : PG0UP
bits : 0 - 0 (1 bit)
access : read-write
PG Pull-Down Control Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PG0DN : PG0DN
bits : 0 - 0 (1 bit)
access : read-write
PG Input Enable Control Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PG0IE : PG0IE
bits : 0 - 0 (1 bit)
access : read-write
PG Control Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PG0C : PG0C
bits : 0 - 0 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.