\n
address_offset : 0x0 Bytes (0x0)
size : 0x8 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x18 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x38 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x28 Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : registers
protection : not protected
address_offset : 0x34 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : reserved
protection : not protected
address_offset : 0x8 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : reserved
protection : not protected
address_offset : 0x1C Bytes (0x0)
size : 0xC byte (0x0)
mem_usage : reserved
protection : not protected
PH Data Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0 : PH0
bits : 0 - 0 (1 bit)
access : read-write
PH1 : PH1
bits : 1 - 1 (1 bit)
access : read-write
PH2 : PH2
bits : 2 - 2 (1 bit)
access : read-write
PH Function Register 5
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH2F5 : PH2F5
bits : 2 - 2 (1 bit)
access : read-write
PH Open Drain Control Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH2OD : PH2OD
bits : 2 - 2 (1 bit)
access : read-write
PH Pull-up Control Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH2PUP : PH2PUP
bits : 2 - 2 (1 bit)
access : read-write
PH Pull-Down Control Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0PDN : PH0PDN
bits : 0 - 0 (1 bit)
access : read-write
PH1PDN : PH1PDN
bits : 1 - 1 (1 bit)
access : read-write
PH2PDN : PH2PDN
bits : 2 - 2 (1 bit)
access : read-write
PH Input Enable Control Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH0IE : PH0IE
bits : 0 - 0 (1 bit)
access : read-write
PH1IE : PH1IE
bits : 1 - 1 (1 bit)
access : read-write
PH2IE : PH2IE
bits : 2 - 2 (1 bit)
access : read-write
PH Control Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH2C : PH2C
bits : 2 - 2 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.