\n

WDT

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x100 byte (0x0)
mem_usage : registers
protection : not protected

Registers

LR

CNT

CON


LR

Watchdog Timer Load Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

LR LR read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

CNT

Watchdog Timer Current Counter Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CNT CNT read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

CON

Watchdog Timer Control Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

CON CON read-write 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Resets to Resets to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 WPRS CKSEL WDTEN WDTRE WDTIE WUF WDBG

WPRS : counter prescaler
bits : 0 - 2 (3 bit)

CKSEL : WDTCLKIN clock source select
bits : 3 - 3 (1 bit)

WDTEN : WDT counter enable
bits : 4 - 4 (1 bit)

WDTRE : WDT interrupt reset
bits : 6 - 6 (1 bit)

WDTIE : WDT interrupt enable
bits : 7 - 7 (1 bit)

WUF : WDT underflow falg
bits : 8 - 8 (1 bit)

WDBG : WDT operation in debug mode
bits : 15 - 15 (1 bit)



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.